Disc diameter r15 for Skoda Octavia A5. Skoda Octavia wheel and tire sizes, bolt pattern

What wheels were installed on different versions of the car?

On the Skoda Octavia A5 (model produced from 1996 to 2004), depending on the configuration, steel (“stamping”) and alloy wheels were installed. The manufacturer allowed the following characteristics for car wheels:

• disc radius – 15,16,17;
• hub bore (DIA) – 57.1 mm;
• permissible offset values ​​(ET) – 30-46 mm;
• drilling (PCD) –5*100 (5 holes per nominal circle of 100 mm);
• disc width ranging from 6 to 7.5 inches;
• type of installed bolts: M14*1.5.

On Octavia A5 cars produced in 2004-2008. disk parameters have changed. Acceptable dimensions have increased to 18 inches, drilling has increased to 112 mm, and the overhang range varies from 31 to 54.

In the updated version, the width of the disk has changed, the range has become from 6.0 to 8.5 inches.

The RS version cars (200 hp engine) were supposed to be equipped with low-profile R17 225/45 tires with 7-inch wide wheels and an offset of 54.

Alloy wheels for Skoda Octavia A7

One of the ways to improve the Skoda Octavia A7 in terms of design is to install non-standard alloy wheels. They look much more attractive than stamped steel ones and have a number of advantages. Alloy wheels are made of light metals, which reduces the weight of the car. Due to this, acceleration dynamics and overall maneuverability are increased.

It is worth noting that the manufacturing plant also produces the Skoda Octavia A7 with alloy wheels. In some trim levels they come right away, and in others they are an additional option. In total, the Skoda Octavia A7 has 18 models of light alloy wheels. The most popular of them will be listed below.

Alcatras

Alloy wheels R16. Factory installed in all “Style” trim levels. In addition, they are an additional option in the “Ambition” and “Active” trim levels. Due to its structure of five double spokes, which have a large space in the middle, it seems that there are actually 10 spokes.

Ilias

Alloy wheels R16. Installed as an additional option in the “Style” and “Ambition” trim levels. It uses a traditional five-spoke wheel in silver. Ilias wheels do not have a special design.

Velorum

Alloy wheels R16. They are installed optionally only in one “Style” configuration. They differ from the previous ones in their elaborate design. The wheels consist of five traditional thick spokes in gray design.

Denom

Alloy wheels R17. The manufacturer also allows them to be installed on the Skoda Octavia A5 version. A distinctive feature is the fact that anti-slip chains can be installed on these discs in winter. They are an additional option in such trim levels as “Style” and “Ambition”. The appearance of the wheels is 5 traditional thick spokes in silver.

Hawk

Alloy wheels R17, which are equipped with the Octavia A7 as standard in the “Laurin Klement” version. They differ from the rest in their unique silver and black design and consist of 5 thick knitting needles.

Pictoris

Alloy wheels R18. The largest disks presented by the factory. Installed in the basic version on the Skoda Octavia RS with tires size 225/40ZR18. The disc is equipped with five double spokes, between which there is a silver insert.

There are only two colors in factory configurations and options. This problem can be solved by visiting a tuning studio. It is also worth mentioning that with different power levels of the Skoda Octavia A7, it is recommended to equip the car with different rim radii.

For example, with a power of 110 hp, it is not recommended to install wheels with a radius higher than 16 inches, as the car will lose acceleration and overall power. The reason for this is the weight, which increases significantly as the wheel radius increases.

When purchasing non-original disks, some problems may arise. Replicas are somewhat cheaper than the original, but may be much inferior in quality. In this regard, the load on the suspension and braking system may increase.

Dimensions of standard wheels (diameter, bolt pattern, width, offset)

Skoda Octavia A7 cars are equipped with R15, R16, R17, R18 wheels depending on the vehicle configuration. The range of standard wheels is quite wide and depends on the modification and year of manufacture of the car.

The drilling pattern for the disks remains the same 5*112, where 5 is the number of bolts used to secure the disk to the hub and 112 is the diameter of the circle on which the holes for these bolts are placed. The hub hole has not changed, and on the new model its size is still the same 57.1. A distinctive feature of the latest generation Octavia wheels is the width and offset of the alloy wheels.

Rules for choosing wheels for the Skoda Octavia A7

Buying non-original discs is not a good decision. Often such products do not meet the standards of automobile wheels in terms of quality. Therefore, after a few months the wheels begin to rust.

As mentioned earlier, the Skoda Octavia A7 is a family car due to its comfort and reliability. In the basic configuration, the factory most often installs stamped wheels, which limit the full potential of the machine. This creates the need to replace factory wheels with lighter ones with an attractive appearance.

When changing disks, it is worth considering their size, because if you choose the wrong one, certain problems can arise. If you don’t have the money to buy original alloy wheels for the Skoda Octavia A7, it’s better to opt for factory stamped models.

What kind of disks can be installed?

The range of alloy wheels for the Octavia A7 is quite wide and, depending on the modification of the car, you can buy any of them. Alloy wheels can also be purchased as an additional option offered by the dealer. These discs are installed on various car modifications, including the Octavia Tour.

In the basic version, stamped steel disks are installed, on which branded decorative caps of two types are mounted: Avantgarda caps are installed on “stampings” of the 15th radius (6.0Jx15), Gaspra caps are installed on stamped disks of the 16th radius (6.5Jx16).

The manufacturer offers models of alloy wheels for installation on the Octavia A7, differing from each other not only in radius and parameters, but also in design and a wide range of colors. You can find the following original discs:

• 16R: Star (5-spoke wheel, 6.0Jx16 ET 46, silver), Minoris (10-spoke wheel, 6.5Jx16 ET 46, silver), Ilias (5-spoke wheel, 6.5Jx16 ET 46, silver), Premia (10-spoke wheel, 6.5Jx16, color scheme: white and black), Velorum (5-spoke wheel, 6.5Jx16 ET, silver color).

• 17R – Crystal (10-spoke wheel, size 6.0Jx17, silver color, recommended by the manufacturer for use in winter), Trius (10-spoke wheel, size 7.0Jx17 ET 49 and colors: silver and black), Teron (wheel on 10-spoke, 7.0Jx17, silver), Denom (5-spoke wheel, 7.0Jx17 ET 49, white and silver-black), Hawk (10-spoke wheel, size 7.0Jx17 ET 49, color: silver)

• 18R – Turini (15-spoke wheel, size 7.5Jx18 ET 51, colors: white, silver and graphite), Golus (5-spoke wheel, size 7.5Jx18, silver), Gemini (10-spoke wheel, size 7.5Jx18 ET 51 and colors: anthracite, silver and black) and Alaris (10-spoke wheel, size 7.5Jx18, silver color).

Denom and Gemini wheels are also suitable for the A5 version of the Octavia. Alloy wheels of the Denom brand are in great demand. The quality of these discs is confirmed by test results.

For alloy wheel models Minoris, Ilias, Denom, Gemini, the manufacturer provides the possibility of installing snow chains.

The selection of tires will also be carried out depending on the size of the rims. For R15 wheels, tires with a dimension of 195/65 are suitable, for R16 wheels, tires with a dimension of 205/55 will be mounted, and for R17, the tire dimension will be 225/45. The most popular tires are from manufacturers such as Michelin, Continental, Dunlop. Among castings, 16-radius wheels are in great demand among buyers.

Recommendations for disc care

• During maintenance, check the geometry and wheel balancing on a special diagnostic stand. If deviations are detected, restore the integrity of the structure;
• If cracks or dents form on the rim, immediately contact a service station for preventive maintenance;
• Avoid hitting road potholes at high and medium speeds. Regardless of the material or workmanship, the disk will be deformed and the seal will be compromised;
• Monitor the tire pressure; it should not be lower/higher than recommended by the manufacturer. If it deviates, pump it up;
• Switch to summer/winter mode in a timely manner. This means that in summer the tire pressure is 0.15 atm higher, and in winter it is lower by the same amount. The parameters are specified in the vehicle operating instructions;
• Tighten the rim nuts with a torque wrench. Excessive tightening contributes to the breakage of the studs, weak - an emergency situation, unscrewing the wheel.

In dry, sunny weather, cast aluminum wheels are least susceptible to external damage. But in slush, ice, when the road is strewn with various chemicals, the rim is most susceptible to corrosion. This provokes paint peeling and destruction of the molecular composition.

Wash your wheels as they get dirty. Since it is unlikely that you can clean it properly with a rag, use high-pressure compressors. Equipment of this class is available at many service stations, workshops, and service centers.

Systematic polishing allows you to get rid of scratches and burrs. First clean the wheel from dirt, dry it thoroughly, and then treat it with a chemical. Wipe several times with a microfiber cloth.

Store the wheels in a hanging position without touching each other. Pre-clean them, dry them, and wrap them in cellophane.

Some motorists practice applying an aerosol to the surface before preservation. However, this is a purely personal decision of the owner.

Maximum and minimum possible disk parameters

If you want to improve the appearance of your car, give it a more aggressive and sporty look with the help of alloy wheels, but you don’t have enough money to buy original Skoda alloys, then you can purchase non-original wheels. The most important thing, when purchasing non-standard alloy wheels, is to know the maximum and minimum acceptable parameters for installing them on a car.

The following parameters will be the same for both factory and non-stock drives:

• Disc alignment (PCD): 5*112;
• Center hole (DIA): 57.1 mm;
• Bolts: 14*1.5

Custom rims can be installed ranging from 15" diameters to 19" rims. Compared to factory specs, custom rims will have the following minimum and maximum sizes:

Thus, you can install both original Skoda wheels and non-standard “casting” wheels on the Skoda Octavia A7; the main thing is to know all the parameters of the wheels when purchasing.

Results and conclusions

With all the breadth of choice of tires and wheels for the Octavia A7, in order to avoid complications, it is worth taking into account the factory recommendations and restrictions.

What is the Octavia wearing: wheel and tire sizes

Octavia A7 brake discs: how to choose and change?

What is the Skoda Rapid wearing: wheel and tire parameters

What tires and wheels are installed on the Skoda Rapid 2: Names, characteristics, sizes

Skoda Kodiak wheels and tires: sizes, maintenance

Overview of sizes and the process of replacing brake discs for Skoda Fabia 2

Source

Decoding the tire markings for the Skoda Octavia A5

Factory-made tires have the following markings on the sidewalls:

• Width;
• Height;
• Rim diameter;
• Designation of the type of construction;
• Load index;
• Speed ​​index;
• Reinforcement of sidewalls and lamellas, if required by technical specifications;
• Name of country of origin;
• DOT – encrypted manufacturer code according to international specifications;
• Outer side designation for asymmetrical tire;
• M&S - marking indicating the intended use of rubber for use on slippery surfaces, slush, and loose snow;
• An eight-digit code indicating compliance with the ESE standard;
• Tire type: tube, tubeless;
• Construction detail;
• Brand name, company name;
• Model;
• Data on permissible maximum load and pressure.

About tires

The question of what tires to install is not particularly critical for the Octavia A8, since tire sizes are quite common and choosing something to suit your taste is not difficult. Summer tires installed at the factory. As a rule, they do not cause any complaints and most owners have not yet “rolled them out”.

With winter there are more options, here everyone is guided by their own experience and priorities. There are quite good reviews about winter tire brands:

• Nokian HKPL8;
• Cordiant Winter Drive PW-1 94;
• Continental IceContact 2;
• Goodyear UltraGrip Ice Arctic;
• Pirelli Ice Zero;
• Michelin X-Ice North 3.

But you need to understand that reviews are a subjective matter, each driver has his own operating conditions and his own priorities. In relation to winter tires, you should first decide on the group (Scandinavian or European), and then select more specifically.

Bolt pattern table

For the correct and high-quality selection of wheel rims, special tables are common, with the help of which you can find out the value for a particular car.

It is important to observe the parameters for drilling, overhang and diameter of the central hole exactly. Only a slight fluctuation in the rim offset of up to ten millimeters in one direction or another is possible.

You might be interested in what country are Dezent wheels manufactured?

At this link you can find drilling tables for all car brands. By selecting the car model and year of manufacture, you can determine all dimensions.

Important!

The data indicated in such tables may not always correspond to real data.

To be completely sure, you need to check the drilling parameters for a specific model in the technical documentation or operating instructions.

Some features of the marking of American tires

The driver encounters the European letter-symbolic designation of tires and wheels much more often than the American one. When choosing and purchasing consumables, difficulties often arise with understanding the size, dimensions, diameter, thickness, height.

• “P” - exclusively for the passenger class;
• “LT” - category “C”, commercial vehicles;
• 5 R16: typical designation for an American tire or wheel.

Where, 32 is the outer diameter in inches. 11.5 is the width in inches, R is the radial design, 16 is the internal diameter (inches).

• XL on the sidewalls: reinforced tire with nylon inserts to prevent damage when driving;
• Extra Load: maximum load index. For example, 92 is equal to 680 kg. Exceeding the specified limit range is not advisable, as it can lead to deformation and rupture of the disk or tire;
• All Season: a designation familiar to us from the European class, indicating all-season use, operation in any weather;
• * (snowflake): for using rubber at low temperatures, on snow, ice, slippery surfaces. The absence of a pictogram allows the tire to be used as a summer tire;
• Pictogram (umbrella): for wet surfaces;
• Outside: asymmetrical tires. It is important to take this factor into account during installation. Incorrect installation leads to deformation of the tread, its rapid wear, and damage to the lamellas;
• RSC (RunFlat System Component): the ability to continue driving the vehicle at a maximum speed of 80 km/h with a flat tire;
• Rotation: direction of the tread. Please take this factor into account when installing. The arrow always points in the forward direction;
• Tubeless: tube/tubeless type;
• Reinforced: multi-layer rubber in manufacturing;
• Temperature: heat resistance class, elasticity at high temperatures;
• Treadwear: recommended mileage;
• TWI (Tread Wear Indiration): tire wear indicator. As a rule, it is indicated by red, yellow, green markers. Green – safe, yellow – acceptable, red – replacement;
• DOT: manufacturer code.

Subject to a moderate driving style and compliance with speed limits, the average tire service life is 70,000 km. Cast aluminum wheels last up to 150,000 km.

Installation of non-standard equipment and mechanisms is not always practical and effective. First, consult with specialists and read the requirements of the operating manual. The book indicates the maximum permissible sizes of tires and wheels.

At the stage of validity of the factory warranty for a technical device, it is not advisable to interfere with the operation of components and assemblies. In case of emergency, use the services of certified service stations, workshops, and ateliers.

For most car enthusiasts who plan to change shoes or change wheels and tires to other sizes, the question is - what are the sizes of wheels and tires on the Skoda Octavia A5? very relevant. When selecting wheels, you must adhere to the standard dimensions and characteristics of the car in general. Here is a table with recommended dimensions from the VAG manufacturer:

For Octavia A5

To correctly select the width of the tire to the width of the wheel, you need to know the CORRESPONDENCE OF TIRES AND WHEELS

J - rim width in inches

R - disk diameter in inches

5x112 - number of bolts (5) and the distance between them PCD in mm (112)

ET — disc offset in mm

DIA - diameter of the central hole in mm

What wheels are suitable for Octavia?

Skoda Replica Replay SK105 6.5x16/5x112 D57.1 ET50 - Skoda line. They look the same as the original ones, the cost is different - about 5 thousand rubles per disc, unlike Draconis, which cost 8,000 rubles. I advise you to look at the catalog of Replica disks for Octavia A5; you will be pleased with the very good options nkolesa/diski/replica/skoda/ - be sure to look!

Wheel bolt sizes (bolt pattern)

M14x1.5x28 cone, head 17mm

code: 8D0601139D (stamp) and WHT001812 (casting)

What pressure should I pump?

Question - what pressure should I pump in the Skoda Octavia A5 tires? The answer can be found on the back of the tank flap. From operating experience, most people use 2.2 on all wheels (205/55).

The exterior style depends not only on the type of body color, some tuning elements, but also on the appearance of the wheels, and in particular the rims. However, the selection of these components should be approached not only from the point of view of aesthetic values, but also the compliance of the size with the factory requirements of the Skoda Octavia Liftback 1.4 (1Z) 2004-2013, as well as performance indicators. In the latter case, products made of light alloy metals largely benefit from stamping. However, not every motorist can afford them financially.

Options

In addition to the material and method of production of the structure, you should inquire about the installation width of the rim, as well as the mounting diameter. It is necessary to determine how these indicators are designated:

• J - width in inches;
• 15, 16, 17 - diameter in inches;
• 5×112 - number of bolts (5) and diameter of the circle on which the mounting holes are located - PCD in mm (112);
• ET — offset in mm;
• DIA is the diameter of the central hole in mm.

It is difficult to distinguish the size of the developments by appearance. They look like R17 although they are size 16. Such developments ensure safety on wet asphalt. Skoda Replica Replay SK105 6.5x16/5x112 D57.1 ET50 is a new series from the manufacturer Skoda.