Alloy wheels for VAZ 2107 - which ones to choose r13, r14, r15

WHEEL DISKS

A car's wheel rims are part of its suspension. Like any other detail, they have their purpose.

WHY DO YOU NEED DISKS?

Wheel rims perform several functions at once:

• transmit torque from hubs or axle shafts to tires;
• ensure uniform distribution and compaction of tires around their seating circumference;
• contribute to their correct position relative to the car body and its suspension.

TYPES OF WHEELS

Today, there are two types of rims for car wheels: stamped and cast. The former are made of steel, the latter - from alloys of light but durable metals.

STAMPED DISCS

Each type of wheel rim has its own advantages and disadvantages. The advantages of stamped ones include:

• low cost;
• reliability;
• resistance to shock loads;
• absolute maintainability.

In order to buy a regular “stamping”, just go to any auto store or market. A huge selection, low prices, constant availability on sale - this is what the undemanding car owner needs.

Stamped discs are reliable and maintainable

There is often no need to buy steel wheels, because they are practically eternal. It is almost impossible to break them. The main malfunction of such disks is deformation due to the wheel falling into a hole, hitting a curb, etc. However, this problem is solved by rolling it on a special machine, and at home - by leveling it with a hammer.

A deformed stamped disk can be easily repaired by rolling it on a special machine

As for the shortcomings, there are fewer of them. Basically, motorists note the lack of aesthetics and individuality, as well as the heavy weight, which affects fuel consumption. As for the appearance, indeed, the “stamping” does not differ in either design or attractiveness. They are all the same. But the heavy weight is a controversial issue, since it was taken into account when developing the car, therefore, the engine characteristics are designed for it.

ALLOY WHEELS

Alloy wheels, first of all, give the car its individuality. With them the car becomes more beautiful and looks more modern. It is this factor that most influences the result of the choice between “stamping” and “casting”.

Alloy wheels are lighter and have a custom design

In most cases, car owners, when buying alloy wheels, do not even suspect that such products do not bend like steel ones under critical load, but split. They can, of course, be restored later using argon welding or other technologies, but it will not be possible to return them to their original technical characteristics.

In most cases, restoration of alloy wheels is impossible

VIDEO: WHICH DISCS ARE BETTER

MAIN PARAMETERS OF WHEELS FOR VAZ 2107

Each part of any mechanism has its own characteristics and parameters, according to which it is actually selected. Discs are no exception. These parameters include:

• diameter;
• width;
• departure;
• hub center hole diameter;
• bolt pattern;
• drilling

  
  Wheels of different cars have different parameters

DISC DIAMETER

Diameter is the main parameter that determines the possibility of installing a disk on a specific car. Standard VAZ 2107 wheels have a diameter of 13 inches.

The diameter of the disc determines its size

Naturally, the larger the wheel size, the better the car looks. Moreover, with larger rims, the car “swallows” small holes and road potholes better. On the “seven” you can install wheels no larger than 14 inches in size without changing tires or modifying the chassis.

DISC WIDTH

The width of the rim, or rather its rim, characterizes the width of the tire that can be used with it. The standard width of the “seven” disk is 5 inches, but parts up to 6 inches wide can be installed.

The diameter and width together determine the size of the disc. In the marking it is designated as follows: 13x5, 14x5, 15x5.5 or vice versa: 5x13, 5.5x14, etc.

The width of the tire depends on the width of the rim

DISC OUTPUT

Reach is probably the most difficult characteristic to understand. It determines the distance from the interface plane of the part with the hub to the conventional plane dividing the disk rim in half. Depending on the model, discs can have either positive or negative offset. In the first case, the mating plane of the part does not cross the conventional boundary, which divides it into two equal halves. Looking at a car equipped with wheels with a positive offset, it will seem to you that the wheels of the car seem to be recessed inside the arches. With a negative offset, on the contrary, the mating plane shifts toward the longitudinal axis of the car itself, and the disk “sticks out” outward.

The standard “seven” disk has an offset of + 29 mm. However, for this parameter a standard deviation in one direction or another is provided, equal to 5 mm. In other words, the VAZ 2107 will fit wheels with an offset from + 24 to + 34 mm. The amount of overhang is measured in millimeters and is indicated on the marking as follows: ET 29, ET 30, ET 33, etc.

With a positive offset, the wheel seems to be recessed in the arch, with a negative offset, it sticks out.

Changing the offset value of the “sevens”, most often in a negative direction, is used to give the appearance of the car a sporty style and aggressiveness. But here it is important not to overdo it. The fact is that when the offset changes in one direction or another, the distance between the point of attachment of the wheel to the suspension and the support point on the road surface also changes. And the more the standard distance is changed, the greater the load the wheel bearing will be subject to. In addition, the changes will also affect the car’s handling, and this is no longer safe.

DIAMETER OF CENTERING HOLE

Any wheel rim is designed for a certain size of the hub, or rather, its centering flange. It is on this that the disk is mounted with its centering hole. For "seven" discs, the central hole has a diameter of 58.5 mm. In standard labeling this is designated as “DIA 58.5”. No deviations are allowed here, but some tuning enthusiasts manage to install on VAZ 2107 wheels with a smaller hole diameter by boring it, or a larger one by using special centering rings.

Centering rings are used when installing disks with a large diameter centering hole on a car.

BOLTS

A parameter such as the bolt pattern indicates the number of holes for mounting the disk and the diameter of the circle along which they are located. The factory 7 wheel rim has four holes for mounting bolts. They are located on one circle, the diameter of which is 98 mm. On the marking the bolt pattern is indicated as follows: “LZ/PCD 4x98”.

As you understand, installing wheels with a different bolt pattern on a VAZ 2107 simply won’t work, especially if its values ​​differ not only in the size of the circle, but also in the number of holes. However, there is a way out, and more than one. The first option is to use special spacers between the disc and the hub. Such spacers have two bolt patterns: one standard for fastening to the hub, and the second for mounting the disk. The second option is suitable only for disks with the same number of bolts and a slight deviation from the diameter of the circle on which they are located. During installation, naturally, problems will arise with tightening the bolts at the final stage. It will not be possible to tighten them completely, which is why the wheel will dangle while moving. But this problem can be solved using special bolts with an offset center. You can either buy them or order them from a familiar turner.

The bolt pattern includes the number of mounting holes and the diameter of the circle on which they are located

VERLOVKA

Such a parameter as drilling is necessary so that the car owner, when buying wheels, does not make a mistake with the size of the mounting holes. If they are larger than the diameter of the bolts, the disc will not fit tightly and will begin to wobble over time. If they are smaller, the bolts simply will not fit into the holes. The diameter of the holes for the mounting bolts in the standard 7 wheels is 12.5 mm. For fixation, M12x1.25 type bolts are used.

Drilling determines the diameter of the disk mounting holes

WHAT CARS WILL FIT WHEELS FOR VAZ 2107

Unfortunately, there are very few cars that have the same wheel parameters as the 7. VAZ 2107, in this sense, is almost unique. And it’s not at all about their diameter, width, or reach. It all comes down to the bolt pattern and the size of the hub hole.

TABLE: CARS WITH SIMILAR WHEELS PARAMETERS

As for domestic cars, standard alloy wheels from VAZ 2112, VAZ 2170 can be installed on the “seven” without modifications. They have similar parameters.

But you don’t have to waste time searching for suitable stock drives. Today you can freely buy wheels of a wide variety of designs, made from various alloys. The cost of a set of good “wheels” for a VAZ 2107, depending on the characteristics and manufacturer, varies from 10 to 40 thousand rubles. Not cheap, of course, but beautiful.

IS IT REALISTIC TO INSTALL SIXTEEN INCH WHEELS ON A VAZ 2107?

Probably, everyone who had to see the “seven” on sixteen- and even seventeen-inch disks was very interested in how they were “dragged” there. It's actually simple. In some cases, the owners of such cars do not even digest the arches. It's all about the height of the tire, which is expressed as a percentage of the height of the rubber profile to its width. And if for a stock tire it is 70%, then in order to put fifteen-inch wheels on the “seven”, you need to put rubber on them with a height of 40–50%.

When installing larger diameter wheels on a VAZ 2107, low-profile tires are used

To install sixteen- and seventeen-inch wheels, it is better to raise the car a little using special spacers for shock absorbers, or increase the size of the arches by cutting them out. As for the tire profile height, it is better if it is no more than 25%.

VIDEO: VAZ 2107 ON SEVENTEEN-INCH WHEELS

Syverlovka and bolt pattern of VAZ wheels

Wheel bolt pattern on VAZ 2107

The design of the seven involves drilling 4x98 wheels, where the number 4 indicates the number of bolts, and 98 indicates the diameter of the holes on the disc structure.

Many foreign cars use a bolt pattern with similar parameters – 4×100. In the first situation, the distance between the centering bolts is 69.3 mm, and in the second case - 70.7 mm. The error is 1.4 mm and does not allow for tight fixation of a non-standard disc.

In addition, installing a car disk with non-standard parameters can lead to deformation of elements, namely mounting holes and bolts.

There are other methods for attaching 100x4 rims to the seven. For example, you can use extended bolts, adapter rings, studs and eccentrics. However, these parts can ultimately complicate or impair the mounting of the wheel product.

Therefore, it is recommended to install standard car wheels and tires so as not to lead to wheel imbalance and vibration while driving.

Wheels on the VAZ 2107 are equipped with 13-inch stamped wheels or analogues with identical parameters. Tires have dimensions 175/70/R13.

The nominal pressure in “seven” tires directly depends on the tire sizes:

175/70/R13 – 1.9 rear, 1.6 front wheels;

165/80/R13 – 2.0 rear, 1.7 front.

Wheel bolt pattern on model 2106

For a six, the wheel bolt pattern is 4×98. As for the factory dimensions of the disks, then:

Tire size for the six is ​​175/70/R13.

As a restyling, you can install wheels 185/60/14, 195/50/R15.

Drilling on the VAZ 2109 model

The VAZ 2109, “nine”, has factory settings for the wheel bolt pattern of 4×98. The factory equipment was equipped with 175/70/R13 tires and 13-inch wheels.

Wheel bolt pattern on VAZ 2110

The tenth VAZ model is equipped with factory stamped 13-inch wheels and 175/70/R13 tires. There were also dozens of configurations with 14-inch casting and 175/65/R14 tires.

As for the dimensions of VAZ factory wheels, the width is 5.0-5.5J, drilling is 4×98, as on other models, the centering hole is 58.5 mm and the offset is ET 37-40.

Drilling on 2111

The Lada station wagon 2111 was equipped with 13 or 14-inch wheels from the factory, depending on the vehicle's configuration. Both options could be used.

Tire sizes: 175/70/R13, 175/65/R14, rims: width 5.0J, drilling 4×98, centering hole 58.6 mm, offset ET40.

Drilling on the VAZ 2114 model

Lada Samara 2113, 2114 cars were equipped with factory stamps with a 4x98 drill bit.

As for the rims, the offset was ET40, width 5.0 J and centering hole 58.5 mm. Wheels 175/70/R13.

Drilling on the VAZ 2115 model

The fifteenth model Lada 2115 is equipped with factory stampings with dimensions of 13 and 14 inches, and a 4 × 98 drill.

As a restyling option, you can use car tires:

Drilling on the VAZ 2121 model

The first Russian SUV Niva from VAZ or Lada 4x4 is equipped with 16-inch steel factory wheels and tires with sizes 175/80/R16 and 185/75/R16.

Disc dimensions: offset ET40, drilling 5x139.7, centering hole 98.6 mm and width 6.5J.

Wheel bolt pattern on a Niva Chevrolet car

The Russian Niva Chevrolet SUV is equipped with factory-made 15- and 16-inch rims with drilling parameters of 5×139.7, offset ET40-48, centering 98.6 mm and width 6-6.5J.

Source

TIRES FOR VAZ 2107

The safety of the car driver and his passengers depends even more on the characteristics and condition of the car’s tires. Their choice must be approached very carefully, and in no case should you skimp.

TYPES OF TIRES BY SEASONAL USE

According to seasonal use, tires are divided into:

• winter;
• summer;
• all-season.

The first ones are made of soft rubber and have a special tread. At the same time, each manufacturer tries to increase the tread area, because the larger it is, the better the tire will perform on winter roads.

The larger the tread area, the better the tire performs on slippery roads.

Summer tires are rougher, and their tread pattern is designed more for better grip on wet surfaces and drainage of water from the plane of contact between the tire and the road.

Summer tire tread is designed for wet grip

All-season tires are a generalized version of the first two types. If the “all-season” tire is really of high quality, then in winter it copes with its duties normally, but in the summer it is significantly inferior to summer tires in terms of the quality of grip on wet surfaces.

High-quality all-season tires do a good job in winter

TIRE PARAMETERS VAZ 2107

Like wheels, car tires have their own parameters. These include:

• profile width (the width of the tire itself, measured in millimeters);
• height (expressed as a percentage of the profile height to the width, measured as a percentage);
• landing diameter (determines the inner diameter of the tire, measured in inches);
• load capacity (indicates the maximum load per tire, measured in kgf);
• permissible speed value (indicates the estimated maximum permissible speed, measured in km/h).

VAZ 2107 leaves the assembly line of the plant shod with thirteen-inch radial tires with a profile width of 175 or 165 mm and a height of 70%. Standard tires are designed for 190 km/h and a load on one wheel not exceeding 470 kgf.

Tires, like wheels, have their own parameters

It is impossible not to mention the tire pressure, because the vehicle’s cross-country ability, its driving performance, and fuel consumption depend on it. The manufacturer of the VAZ 2107 recommends observing the following pressure indicators.

TABLE: RECOMMENDED TIRE PRESSURE FOR VAZ 2107

The choice between beauty and functionality of wheels should be based on how you use the car. If it is intended for city car rides, or participates in exhibitions of tuned cars, festive motorcades, then alloy wheels and low-profile tires are an ideal option. If the car is used daily in our off-road conditions for work, then it is better to install “stamping” on it with standard tires.

Features of wheel sizes for the most popular VAZ models

Among several dozen VAZ modifications, the most popular models over the entire 50 years were only 2 of them, as can be judged by the number of copies sold. The wheel sizes for these cars had the following parameters, which varied depending on the year of manufacture, technical equipment and equipment of the car:

• VAZ is the latest modification of the “classic”, produced on the plant’s conveyors for 30 years: from 1982 to 2012. During this time, it never changed its appearance, and the disc bolt pattern was the same - 4x98 with a central hole diameter of 58.6 mm.

The width of the rim varied slightly depending on the model year.

If in 1982 the plant produced models with tire dimensions ranging from 5J to 5.5J, then at the end of production the concern increased the permissible size to 6J.

You may be interested in this About wheels on cars with a shelf

The radius of the wheels invariably varied from R13 to R15, which made it possible to alternate them by season, periodically changing the side profile of the tire, or immediately use all-season tires with a diameter of R14.

The VAZ 2107 tire size invariably consisted of only 3 main parameters - 175/70/R13, 185/60/R14 and 185/55/R15. The last of the listed parameters was actively in demand among lovers of fast driving on smooth city roads.

On a note.

As for the R13 rubber, it allowed the driver to feel as comfortable as possible when driving over rough terrain, as well as in winter, when the high cord profile took part in adhesion to the road surface. But the most popular parameter remained the universal size R14 and the largest number of tires were sold in this dimension.

If we look at the concern’s earlier cars, we can see that the wheelbase of the Zhiguli has remained virtually unchanged for more than 40 years. This leads to moral backwardness of the technical equipment of the plant's products. At the same time, the lack of new developments greatly reduces both the speed of release from the assembly line and the cost of engineering equipment, which leads to a very attractive retail price for the vehicle.

• VAZ 2114. Produced in a smaller range - from 2001 to 2013. The car was just a restyled modification of the classic “nine”. The legacy of the outdated model did not affect the high popularity of this Lada, and all the wheels that were installed on hubs in the basic version had the same traditional bolt pattern 4x98, DIA 58.6 mm.

European standard bolt pattern 4x100 for Lada X-Ray

• Like the bolt pattern of the VAZ 2114, the width of the wheel rims was not much different from the “seven” and fluctuated between 5J – 6J for the entire production period. As for radius, the concern has completely eliminated the 15-inch diameter from the factory equipment, without prohibiting drivers from installing this parameter as an option. The bolt pattern of VAZ 2114 wheels in the current size also made it possible to install standard 4x100 wheels in accordance with the sizes usual for Europe.

Not a single Lada model has ever looked aggressive; the hallmark of the product was practicality and reliability in operation. The concern did not use extreme overhang indicators, and the wheels were always hidden under the body arches. The average ET limit values ​​for both VAZ 2107 and 2114 were ET25...35 mm, and deviations from this characteristic obligated drivers to install additional mudguards on the side parts of the body and change the design of the hubs, making them more durable to avoid deformations.

Important!

The bolt pattern of the VAZ 2114 wheels, as well as all other dimensions of the hub and disks, were used on the brand’s followers - Kalina and Priora. With the arrival of new management at the domestic concern, this parameter ceased to exist altogether, since the plant had a new orientation to the West and possible import of products to the nearest CIS countries.

5 studs on VAZ 2121 wheels

Wheel functionality

In front-wheel drive cars, the disk transfers revolutions to the drive pair. The tire fits tightly on it. The front suspension becomes stiffer due to the correct placement of the tire.

Wheels for the VAZ 2107 are available in several versions.

They differ in certain parameters:

• Width.
• Diameter.
• Mass.
• Number of mounting holes.

It is allowed to install wheels of sizes R13, R14 on any VAZ 2107 car. According to the production method, this can be either stamping or casting.

Beginners always ask the question, which discs are best to put on the seven? It will not be possible to answer it in one sentence. Each type has its own advantages and disadvantages.

Stamped

Main advantages:

• Low cost.
• Unpretentiousness.
• Excellent wear resistance.
• Plastic.

The stamping, falling into the hole, does not break or crack, it only wrinkles. You can straighten out the dent with a regular hammer.

The main disadvantage, perhaps, is the large mass. Because of this, the car takes a long time to accelerate, it develops greater inertia, and the braking distance increases. All these qualities affect the car’s handling and increase fuel consumption.

If you look at the stamped wheels on the VAZ 2107 from an aesthetic point of view, you will notice that they all look the same. The factory coating is usually of poor quality, so the paint quickly begins to fly off and the surface becomes covered with rust. To prevent the stamping from making noise or being corroded by salt, it must be constantly washed.

Wheel rim bolt pattern on Lada

Bolt pattern is a calculated characteristic of wheels, which determines the number of mounting holes and the diameter of their location circle. This characteristic is the same for almost all AvtoVAZ models and depends on the following vehicle indicators:

Wheels for VAZ 1111

• The weight of the car in running order, that is, fully equipped, with passengers and the maximum possible weight of cargo in the trunk.
• The nature of the vehicle’s operation, namely how important overloads are for a given vehicle. If we are talking about a city sedan, then a bolt pattern of 4 studs is quite enough for it, but a crossover or SUV is certainly equipped with 5 or 6 threaded rods, because off-road driving can temporarily increase the load on the wheel several times.
• Dynamic properties of the car. When entering a turn at high speed, as well as getting into holes, the impact increases the load on the hub studs exponentially.

Important!
Automotive plant engineers prescribe the bolt pattern depending on the maximum load on the vehicle with the required safety factor.

Wheels for model 2104

Cast

Today, the best wheels on the VAZ 2107 are considered to be cast products. They recently came into fashion and quickly gained great popularity. Light alloys are used for their production, so they weigh 30% less than stamped counterparts.

Alloy wheels are highly durable and almost never rust. In addition, their appearance has many differences. Designers take care of the aesthetics of the product, giving it an original look.

If we consider die-cast models from the point of view of functionality, certain advantages immediately become noticeable:

• Fast acceleration.
• Soft movement
• Reduced fuel consumption.

For all their advantages, alloy wheels are not without negative qualities. After a strong blow, for example, when flying into a deep hole, it will not crumple, but simply burst. Such parts cannot be repaired.

The cost of cast structures is always higher than ordinary stamping, and the service life is much shorter. Any impact is transmitted to the suspension, since alloy wheels cannot absorb external influences by their own deformation. Each driver decides which wheels to install on a VAZ 2107 individually, taking into account future operating conditions.

When choosing, it is very important to consider the car model. For example, wheels for low-profile tires are not suitable for summer residents; heavy structures will increase fuel consumption.

Minimum and maximum possible parameters of non-standard disks

Selecting non-standard disks is associated with certain difficulties. This applies to the boundaries of the wheel arch, hub parameters, overhang and permissible rim width.

Despite the fact that at the factory only 13-inch wheels were installed on the VAZ-2106, and only 14-inch wheels were considered as replacement options, 15 and even 16-inch wheels are also applicable for installation in this car model.

• The R 15-inch version is more suitable for driving in urban environments. Bad roads can cause them to wear out quickly.

• R To a large extent, this size is set only to improve the appearance of the car. Use on bad roads can lead to damage to the rims and wheel arch.

In the latest VAZ models, manufacturers abandoned their usual 4x98 mm bolt pattern in favor of the more universal 4x100 mm. With the use of eccentrics, a difference of 2 mm can be solved. Other bolt patterns require the installation of additional adapter spacers.

The maximum rim width provided by the manufacturer is 6 inches with an offset of 29 mm. When installing a wider version, you will have to adjust the offset using spacers. But you need to understand that wide rims can worsen the car’s handling. In addition, they are more susceptible to drifts in bad weather or during the winter season.

To increase the level of driving comfort, using new alloy wheels is not only possible, but also necessary. But, based on safety and common sense considerations, it is worth sticking to the standard factory parameters.

VAZ 2107 wheel sizes

Four mounting bolts are used to secure the products. The holes for them are located around a circle with a diameter of 98 millimeters. Holes with a diameter of 12.5 millimeters are drilled for the bolts.

In order for the disc to fit freely on the hub, a central hole with a diameter of 58.5 millimeters is made in it. It is through this hole that its orientation occurs. The bolts only press the flange against it.

When installing an alloy wheel, you may need to use an adapter ring. Sometimes without such an additional part it is impossible to create an accurate alignment of the hub and the surface of the disk. The ring can be freely purchased at any auto store.

The offset, or offset of the disc on a VAZ 2107 is usually 29 millimeters. This term refers to the distance formed between the mating surface of the disk after installation on the hub, with a conditional plane passing through the center of the disk rim.

That is, when the offset is positive, it seems that the element has gone deep into the arch. With a negative value, it seems to come out of the arch, it seems that it is too deeply recessed in the seat.

Experts advise making the flight within normal limits. If the overhang is too large, the wheel may begin to touch the fender liners. A deviation of 5 millimeters in any direction is allowed. In other words, on a VAZ 2107 the offset can be in the range of +24/+34 millimeters.

Moreover, this parameter is designed only for a specific disk width. To install a wider model, it is necessary to withstand a smaller offset.

Wheel rim parameters for model 2108

Like the 2107, the 2108 featured 13-inch forgings from the manufacturer. On the Lada Nine (VAZ 2109) with five doors, R13 wheel products were also used.

Tire parameters: 165/70/R13, 175/70/R13.

However, unlike the seven, the eight used discs with the following parameters:

• width 5J;
• departure ET40;
• drilling 4×98;
• diameter of the central hole is 58.6 mm.

Also, depending on the modification, wheels with sets of tires could be used on the eight and nine:

Attention, this topic is considered a bayan, I am writing here so as not to lose it!

When choosing wheels for our car, we must be guided not only by their aesthetic appearance and our desire, but also by the possibility of using certain wheels specifically for a specific car model. Next, we will try to provide the most detailed information on the selection and technical characteristics of disks.

Functions of disks on a car.

The rims of our car perform a whole range of tasks: transmitting torque, sealing the tire around the perimeter (since most tires are now tubeless), ensuring proper structural rigidity under the weight of the car. Based on these goals, we can formulate a number of requirements for disks and their characteristics. They must be strong, balanced, and of consistent dimensions. Let's start with the sizes of wheels (disks) used for cars.

Disk Size Specifications

Radius and Width

(wheel size) is the first important parameter that determines the external dimensions of the disk (disk diameter and disk width), and, accordingly, the possibility of installing it on a particular car.
This is due to the fact that, as a rule, the manufacturer provides wheels of its own size for each car model. Dimensions are designated as follows: 5×13; 6x14 ; 6.5×15, and so on (standard row of disks), and read like this: “five by thirteen”, “six by fourteen”, “six and a half by fifteen”. The first number is a row (can be 4; 4.5; 5; 5.5; ... 10) and indicates the width of the rim of the disc in inches. The second number
is a series (12, 13, 14, ... 22) and indicates the diameter of the rim of the disc in inches. (Figure 1 Disc diameter, width and offset). So, for example, on VAZ “classic” cars it is necessary to install wheels of the following sizes: 5 × 13 or 5.5 × 13, that is, with a diameter of 13 inches and a width of 5 or 5.5 inches. On VAZ cars of the eighth and tenth families (with front-wheel drive), in addition to the “thirteenth” rims, you can also install 5.5×14 and 6×14 rims, and with a low-profile tire, “fifteenth” 6×15 or 6.5 rims ×15. (except that 15-inch wheels are not approved for use by the manufacturer and you may have problems when passing a technical inspection, but it is possible to install them) This size is very important for tires on wheels since they also have their own specific width and height and are not Each tire can fit on the wheel we have. If we often pay attention to the diameter of the disk, then rarely does anyone look at its width, which ultimately naturally affects both operation and reliability. More detailed information about the characteristics and standard sizes of tires can be found in the section “Tire sizes and markings”.

However, when choosing a wheel, it is very important to consider that the wheel size is a necessary, but far from insufficient and final parameter. There are other, no less important parameters.

Wheel offset

- this is the distance in millimeters between the mating plane of the disk when installed on the car hub and the conditional plane passing through the middle of the disk rim. (See Figure 1 Disc Diameter, Width and Overhang.)

The disc offset can be “positive” (pattern “offset +”) if the mating plane does not go beyond the imaginary plane. In this case, the installed wheel will have most of the rim “recessed” inside the car’s arch; visually it will seem that the disc is recessed into the arch. The disc offset can be “zero” if the mating plane and the plane imaginary in the center of the disc rim coincide with each other. The disc offset can be “negative” (Fig. 1 “offset-“) if the mating plane is closer to the center of the car than the imaginary plane in the center of the disc rim. In this case, what is visually striking is that the seat is deeply recessed into the disk, and the disk itself seems, on the contrary, to protrude outward. To determine the wheel offset, we will use Figure 1. It is necessary to measure the distance “B” from the inside of the wheel. Divide the distance “X” in half, and subtract this half of “X” from “B”. If the resulting difference is positive, then the offset is “positive”; if it is negative, then the offset is correspondingly “negative”.

Wheels for VAZ 2107: choice, size, bolt pattern

Car wheels perform not only basic operational functions. It’s hard to imagine the stylish appearance of a vehicle without well-groomed and pleasing wheels. The choice of products on which tires will be installed must take into account a number of factors.

Tuning decisions should in no way be made to the detriment of the technical characteristics of the car. The selection of wheels for a VAZ-2107 will be successful if you take into account a number of technological and design features of the model.

Throughout the entire period of mass production, the VAZ 2107 was equipped with stamped wheels with a diameter of 13 inches (R13) for standard 175//70 R13 tires. Export versions, as an exception, were equipped with light alloy models of the same size.

In addition to diameter, there are a number of other parameters of car rims:

• width;
• bolt pattern;
• departure;
• centering hole.

The standard rim width of the VAZ-2107 of various models ranges from 5 to 5.5 inches. This size is of great importance for the directional stability of the car; the coefficient of adhesion to the road surface depends on it. Symbol: 5.0J or 5.5J.

The bolt pattern in production models is indicated by the symbols 4x98, where 4 is the number of holes for mounting bolts, 98 is the diameter in millimeters of the circle on which they are located. To put it simply, 98 mm is the distance between the central axes of opposite holes. Novice car enthusiasts underestimate another important parameter. The diameter of the hole itself affects the reliability of fastening the wheel to the hub; it must be taken into account when choosing mounting bolts.

Overhang is the distance between the plane of contact of the disk with the hub and the plane that conventionally cuts the rim in the center. There are positive and negative offsets. In the first case, the wheel is recessed into the arch, in the second it is moved towards its outer boundary or even protrudes beyond it. The standard offset of VAZ-2107 wheels is positive and amounts to 29 mm (ET29).

The centering hole for production models is marked with DIA 58.5. The numbers indicate the hub diameter in millimeters. The value of this parameter is important when choosing new disks; if the centering values ​​do not match, a special sealing ring is additionally purchased. The tightness of the fit of the central hole of the disk to the hub is a determining factor; the correct operation of the tires and the absence of “runout” of the wheel depend on it.

What wheels were installed on different bodies and configurations?

When selecting new wheels for any car, including the domestic VAZ-2107, it is necessary to take into account a number of factors specific to this particular model. Traditionally, most cars that rolled off the Volzhsky Automobile Plant assembly line had the most budget-friendly wheel options. The VAZ-2107 was equipped with 13-inch stamped steel elements with standard tires in size 175/70R13.

Starting from 1982 until the end of mass production in 2012, the “seven” was produced in 13 modifications. One of them, namely the VAZ-21077, was developed specifically for export to the UK. In this version, more expensive, alloy wheel versions were installed on it.

Knowing the basic technical parameters of a wheel rim, you can determine its compatibility with a specific car model. In addition to the diameter, you need to take into account such indicators as:

• Rim width.
• PCD – diagram for drilling mounting holes (bolt pattern).
• ET – disc ejection.
• DIA is the diameter of the central hole.

As for the bolt pattern and the central hole, everything here is traditional for the old Tolyatti models. These indicators are strictly tied to the parameters of the hub. In numerical terms, they look like this: 4x98 mm and 58.5 mm, respectively: 4 is the number of fastening points, 98 mm is the distance between the centers of opposite mounting holes, 58.5 mm is the diameter of the hole located in the center of the disk.

Rim width is measured in inches. In the VAZ-2107 this indicator is equal to the values ​​5 and 5.5. Knowing the width of the rim, you can understand how wide the tire should be. In the marking this value is written as follows: 5J and 5.5J.

The offset is the segment between the imaginary plane dividing the rim into 2 equal-width rings and the docking area of ​​the car's hub. In the marking, these are the letters “ET” and the numerical value is indicated in millimeters. Standard VAZ-2107 wheels have an offset of ET29.

Full coincidence of the central hole of the disk with the corresponding parameter of the hub helps to accurately center the disk during installation, which has a positive effect on the service life of the tires and eliminates wheel runout when driving.

Parameters of standard bolts

The disks are fastened with a 19 mm wrench using steel bolts M12x1.25x27, where 12 indicates the diameter, 1.25 is the thread pitch, 27 is the length of the threaded part. The seat has a cone shape for reliable fixation and centering.

The use of bolts that do not meet the technical requirements leads to vibration of the wheel and contributes to its separation.

Technical specifications

The choice of disks is based on technical parameters that are important to consider for safe use in subsequent operation. Experts have formed basic technical standards that are important to adhere to when choosing disks in order to avoid operational inconveniences:

• The number of mounting holes and their circumference diameter is 4*98.
• Hub diameter is 58 mm.
• The most suitable disk size is 13-15, but the 16 radius refers to non-standard variants of a special design.
• Reach – 15-30 mm.
• The most suitable disc width is 5-6 mm.
• M12*1.25 bolts are suitable for fastening the wheels.

These are technical recommendations, but depending on the specifics of the tires and the individual needs of the buyer, wheels are also selected.

Freelance options

VAZ-2107 cars are equipped with stamping, which has certain advantages and disadvantages. Stamped discs serve for a long time and reliably, bend and do not burst upon impact, and can be easily repaired even at home. Such models are easy to use, affordable, and do not attract the attention of intruders. However, the relatively large weight increases fuel consumption, makes acceleration and braking difficult, and creates inconvenience during installation and dismantling.

Innovative light alloy models are divided into 3 categories based on their manufacturing method:

• cast;
• forged;
• prefabricated

Cast ones are made from alloys based on aluminum or magnesium, which allows them to reduce their weight by a third compared to standard versions. The fragility and inelasticity of the material upon impact leads to chips or even bursting of the wheel.

Forged products are distinguished by increased strength and lower density due to hot stamping technology. Deformation requires a lot of force, but the inflexibility of the material forces the suspension to take on the full force of impacts when driving on a bad road.

Prefabricated ones consist of 2-3 segments fastened with bolts. You need to pay special attention to the fastening material. Steel bolts rust quickly, titanium bolts do not corrode. Components can be manufactured using different methods and from different materials. This technological solution makes it possible to reduce weight, increase the interchangeability of parts and the maintainability of products.

Information on wheel bolt patterns on domestic VAZ vehicles

All VAZ cars from the very foundation of the plant to the present day had only 3 main types of bolt patterns, since most modifications were made on a single platform, only their appearance changed. The bolt pattern for most Lada models looked like this:

• The smallest representative of the automaker - VAZ 1111, popularly called "Oka", was produced in the Russian Federation for 20 years - from 1987 to 2008. Considering that the weight of this especially small class car was only 975 kg, and the load on the wheel was less than 250 kg, Oka became one of the few representatives in its class for which a bolt pattern of 3 studs was used.

The final parameter was 3x98, with a mounting hole diameter of 58.1 mm. This was quite economical for the Oka owners.

It was quite problematic to find a similar wheel size on the market, so stamped products with a radius of R12 and R13 were often re-drilled in order to successfully fit on the hub.

You might be interested in what country are Nitro (N2O) wheels produced in?

Bolt pattern VAZ 2107 4x98

• The vast majority of models of the AvtoVAZ concern, starting from 2101 and ending with the Lada Priora or Kalina, were produced from the assembly line in the form of sedans, liftbacks, hatchbacks or station wagons of the compact or subcompact class.

On a note.

The wheel load and dynamic parameters of these vehicles are very similar to each other.

Starting from 1966, when the concern released its first “penny”, and ending in 2015, the wheel bolt pattern for these cars was 4x98 mm, the diameter of the central hole was 58.1 mm.

The most popular Lada models today, for which wheels with a 4x98 bolt pattern are still sold, are VAZ 2106, 2107, 2109, 2110, 2112, 2114.

• The latest VAZ models, such as Vesta, Granta and X-Ray, produced since 2015, have a wheel pattern as close as possible to the international standard for compact cars. This parameter on the specified modifications is 4x100.

However, this difference does not mean that the 4x98 bolt pattern does not allow the installation of X-Ray wheels on older cars. On the contrary, all products are fully compatible; drivers do not even need to use spacer plates, since the nut can be screwed all the way and securely fixes the wheel.

• Among all the products of the AvtoVAZ concern, such models as the VAZ 2121, or the classic Niva and all derivatives of this SUV have always stood out: the 5-door Taiga, Chevrolet Niva and other models. Due to increased loads on the hubs and wheels due to unsatisfactory road conditions, for which all parameters of the Niva were designed, these compact all-terrain vehicles traditionally had a disc bolt pattern of 5x139.7, with a central hole diameter of 98.5 mm.

These increased indicators allowed the wheel to freely resist bending moment, absorb large loads when the center of gravity is shifted to one side when moving on an inclined plane or when the wheels are forced to hang, and also allowed the car to transmit more torque to the tire treads when driving uphill without the risk of breaking parts .

Wheels for VAZ 2114

Important!

Despite the paucity of assortment when equipping vehicles and a small selection of cars of different classes, the plant has achieved maximum versatility in compatibility and the possibility of interchangeability of rims for cars produced in 2022 or 50 years ago.

Selection principles

The selection of wheels is made taking into account the design features of the vehicle and operating conditions, assessing the impact of many factors.

The VAZ-2107 on 14 wheels looks more attractive than the standard version, but it must be taken into account that a new light-alloy version will lead to additional financial costs due to a change in tire size.

A car with 15 rims looks beautiful, but requires the use of low-profile tires, otherwise the tires will rub against the wheel arch protection. Operation in off-road conditions, maximum loading of the trunk with this option is fraught with negative consequences.

Wide wheels with a long offset increase stability, but tend to heavily pollute the car in bad weather conditions. The large curb weight of the car leads to friction between the tires and the fender liners.

The selection of accessories is carried out taking into account the correspondence of the parameters of the tires used to the standard sizes of the wheels. Dimensions of 13 inches exclude the use of wide-profile tires due to the small volume of the wheel arch.

Choosing non-standard wheels means replacing car tires. It is necessary to take into account the acceptable tire sizes for the VAZ-2107 recommended by experts:

• diameter 13-15 inches;
• width 165-185 mm;
• tire profile – 55-80%.

Acceptable parameters of non-standard disks

Tuning of the VAZ 2107 is carried out based on the design parameters of the car. The pursuit of stylish design should not be in dissonance with the requirements of safety and comfort.

The table below illustrates some selection criteria (standard indicators are highlighted in bold):

The central hole for the VAZ 2107 should have a diameter of 58.5 mm. The use of larger discs is possible using a special adaptive ring.

Connoisseurs of extreme design and low profile should take into account the permissible limits of experimentation:

• disc diameter from 13 to 15 inches;
• reach 24-34 mm;
• rim width 5-6 inches;
• central hole 58.5 mm;
• The bolt pattern is strictly 4x98.

When choosing an offset, you need to remember that wide rims require a smaller offset value.

In exceptional cases, extreme sports enthusiasts install products with different bolt patterns and central holes, but this is possible when replacing individual parts of the car (hub, brake drum). Experts do not recommend making changes to the design features of the car.

Knowledge of the design features of the VAZ-2107 and compliance with technical operation standards allows you to choose attractive wheel models without reducing the technical characteristics of the car and threatening driving safety.

Which wheels are suitable for VAZ 2114 and VAZ 2115

These models, produced by AvtoVAZ not so long ago, were very popular and are actively used today. The 14th model became a restyled version of the VAZ-2109, and the “tag” became the VAZ-21099. Both of them are part of the LADA Samara line.

Standard wheels for these vehicles are 13″ in diameter. If wheels for VAZ 2114 R13 are used , tires with a sufficiently large profile are installed on them.

In addition, it is possible to equip the car with other wheels, including those with a larger diameter. At the same time, you can select accessories without tuning the car. If you want to equip the iron horse with wheels with a diameter of 14 inches, you don’t need to make any special calculations (the only thing you need to take into account when it comes to wheels for the VAZ 2114: the landing parameters should vary from 5 to 6″ (this is indicated in the documentation for the car) ). In this case, the most recommended tire options for installation are: 185/60 R14 and 175/65 R14 (car enthusiasts are more likely to lean towards the first type of tire).

Wheels for VAZ 2114 R15 can also be used to equip a vehicle. However, in this case it is necessary to choose low-profile tires. And we should not forget that since such equipment is not provided by the manufacturer, this point can lead to problems when the car undergoes periodic inspection.

Similar wheels are installed on the Lada 2115. If we consider tires and wheels for the VAZ 2115: the (standard) parameters are as follows:

• 13 / 5.0J PCD 4×98 ET 40 TsO6, 175/70 R13;
• 14 / 5.5J PCD 4×98 ET 37 TsO6, 175/65 R14
• hub diameter - 58.5 mm

It is also possible to equip the “tag” with 185/60 R14 wheels. As a tuning option, we can select models with dimensions 195/50 R15. If we consider tires and wheels for the VAZ 2114 R16, as well as an option with the same diameter for the VAZ 2115, then the possibility of installing 205/45 R16 wheels cannot be ruled out.

When equipping a car, it is necessary to choose wisely not only wheels, but also tires. Properly selected wheel assemblies largely ensure the safety of the vehicle on the road.

Alloy wheels for VAZ 2107

The appearance of the car is determined by the condition of the paintwork, external parts and accessories. Original alloy wheels on a VAZ 2107 car are one of the most common types of tuning. In addition to purely decorative factors, such parts can significantly improve the operational and technical characteristics of the car.

High-quality alloy wheels on the VAZ 2107 reduce unsprung weight. This circumstance has a positive effect on the condition of the suspension and leads to the following consequences:

1. The load on suspension parts: silent blocks, shock absorbers and ball joints is reduced.
2. This increases their service life and, accordingly, the vehicle’s overhaul mileage.
3. Reducing the overall costs of purchasing spare parts and parts for repair work.

The above points are valid primarily only for high-quality alloy wheels. Low quality products can cause a traffic accident with serious consequences.

RULES FOR SELECTION OF LIGHT ALLOY WHEELS

The VAZ 2107 car has very specific technical parameters. The manufacturer recommends using certain types of components and consumables during operation. Stamped steel or cast alloy wheels must have the following technical characteristics:

1. number of bolts – 4 units;
2. distance between attachment points - 98.0 mm;
3. disc mounting diameter - 13 inches;
4. wheel width in the area where the tire is installed is 5.5 inches;
5. Disc offset – distance from the central plane to the mounting pad – 29 mm;
6. The minimum diameter of the hub assembly is 60.1 mm.

The manufacturer of the VAZ 2107 recommends adhering to exactly these characteristics when choosing and installing wheel rims. In some cases, sellers urge you not to pay too much attention to the machine’s operating manual and to purchase castings with other parameters. They are driven mainly by the desire to sell a set of components and make a profit from this process.

What kind of drilling is on the VAZ-2114

One of the main parameters that you should pay attention to when replacing standard disks on a VAZ-2114 car is the dimensions, location and diameters of the mounting holes, PCD, pitch circle diameter, or, in simple terms, drilling or bolt pattern.

Bolt pattern on a VAZ-2114 wheel

Bolt pattern - this characteristic is expressed in two numbers and indicates the distance between the centers of the mounting holes and their number.

Drilling for all VAZ cars (except Oka and Niva) - 4x98 , four holes, the centers of which are located at a distance of 98 mm from each other .

However, this is a simplified designation for the user. The disc manufacturer is required to take into account both the diameter of the holes, their number, the distance between their centers, and the diameter along which the centers of the holes are located . Such a designation would complicate the selection of disks by the user, so knowing drilling in the “number of holes/distance between them” format is considered sufficient.

A few more wheel parameters

The drill bit can be measured using the spare wheel. In all SAMARA drilling 4*98

There are several more parameters that relate to the original VAZ-2114 rims - the width of the stock rim is 5.0J , the offset of the ET45 , the diameter of the centering hole at the hub is 58.5 .

SOME FEATURES OF ALLOY WHEELS

When it comes to choosing a specific model of components, the car owner’s own opinion is decisive. When buying wheels for a VAZ 2107 car, you should keep the following points in mind:

1. There are two types of components of this type: cast and forged. The first option is relatively inexpensive; in this category there are many defects with hidden defects.

Forged, or more precisely, wheels made using high-pressure casting technology, are distinguished by a high level of quality. There are practically no defects among these products.

Products of this type have a wide range of standard sizes and a huge selection of components of different designs. Every car enthusiast can choose the most suitable wheels for himself, not only by technical characteristics, but also by their appearance.

What drives can be installed

When planning to replace old steel wheels with alloy wheels, you should choose either original products or products from well-known manufacturers who care about the quality and safety of their products.

Alloy wheels combine the following useful properties: they are lightweight, practical to use, endowed with sufficient strength and have an attractive appearance, which is aimed at transforming the entire appearance of the car.

The most common among alloy wheels are aluminum products. This is due to the fact that they are resistant to corrosion, meet strength requirements and, in comparison with other alloy wheels, remain relatively inexpensive.

Titanium alloy is the most expensive option. It also meets all the technical specifications, but at the same time has a more attractive appearance. In third place is the option using a magnesium alloy.

The latest models from AvtoVAZ use wheels with a 4x100 mounting pattern. When installing them on a 4x98 hub, you should use studs with an eccentric to compensate for the difference of 2 mm. To install disks with other mounting patterns, you will have to use the appropriate adapters (spacers).

You must understand that installing wheels larger than 15 inches is impossible without interfering with the car’s design.

RECOMMENDATIONS FOR USE

Alloy wheels for the VAZ 2107 are installed on the vehicle without additional elements. Typically, standard wheel bolts are used for this, which can be easily unscrewed using a standard wheel wrench. This approach greatly simplifies the life of car thieves; experts recommend purchasing a set of so-called secrets.

Alloy wheels mounted on a VAZ 2107 car, with the help of this type of fastener, can significantly reduce the risk of their theft. When choosing wheels for your car, you should pay attention, first of all, to the recommended parameters. The issue of choosing the appearance of the wheels is decided by car owners in accordance with their own ideas.

Sources

• 7vaz.ru/tjuning/litye-diski.html
• zapchasti.expert/kolesnye-diski/diski-na-vaz-2107.html
• zen.yandex.ru/media/kolesadom/kakie-diski-mojno-postavit-na-vaz-2107-5aaec424dcaf8e4aa3ee1ec2
• bumper.guru/klassicheskie-modeli-vaz/kuzov/diski-na-vaz-2107.html