What size are the wipers on the VAZ 2107

Rear Rear:
Possible sizes of rear wipers for VAZ 2107 of all years of manufacture.

Data in inches and (mm).

Disclaimer: Although the data represents official manufacturer figures, the information above is for reference only and is not guaranteed to be completely accurate. For cars of the same model manufactured for the USA, Europe and Japan, the size of the wipers may differ.

Dimensions of the VAZ 2107 car
Wheel sizes VAZ 2107
Wheel sizes VAZ 2107
Tire sizes VAZ 2107
Body dimensions VAZ 2107
Dimensions of wipers VAZ 2107
VAZ 2107 battery sizes
Dimensions of wheel bolts VAZ 2107
Dimensions of air filters VAZ 2107
Dimensions of fuel filters VAZ 2107
VAZ 2107 engine sizes
Dimensions of oil filters VAZ 2107
Dimensions of trunks VAZ 2107
Piston sizes VAZ 2107
Cylinder dimensions VAZ 2107
Dimensions of fuel tanks VAZ 2107
Dimensions of front doors VAZ 2107
Dimensions of rear doors VAZ 2107
Dimensions of windshields VAZ 2107
Dimensions of rear windows VAZ 2107
Dimensions of side windows VAZ 2107
VAZ 2107 hood dimensions
Seat dimensions VAZ 2107
VAZ 2107 interior dimensions
Valve sizes VAZ 2107
VAZ 2107 piston ring sizes

Comments. Have questions? We will answer everything.

Types of wipers

First of all, it is worth noting that there are several main types of products that are suitable for the same car model. On average, windshield wipers are used for about a year, then they become unusable; Most often, their elastic bands may dry out. The quality of glass wiping and the absence of unpleasant sounds when the wipers operate depend on the type and quality of the product.

The wiper consists of the following elements: a body and a working surface. There are the following types of windshield wipers:

Frame - based on levers and rocker arms, the frame is used to press the wiper to the surface of the glass, holding the wiper in the desired position. The tighter the product adheres to the glass, the better it will work. If the wiper is worn out, it will not be effective enough to clean the glass. When the graphite layer of the structure wears away, small scratches will begin to appear on the glass. Frame products are quite reliable, but their service life is not the longest: the sore spot is the hinges, which wear out faster than other elements, as they experience increased loads when moving. In extreme cold or freezing, the efficiency of the structure will be significantly reduced.
Frameless wipers on the VAZ 2107 have a rather unusual, attractive appearance. They differ in that the working surface does not have a frame base. Instead, a spring base is responsible for pressing the cleaner. The design has a number of features, the following can be highlighted: the service life exceeds the period of use of frame wipers, but you should not expect that they will last for several seasons at once. The price of the product is significantly higher than the frame version, approximately 1.5-2 times. It is important to choose the right model that is produced specifically for the VAZ 2107, since the mounts are not universal.
Hybrid wipers on the VAZ 2107 are essentially a regular frame wiper, but placed in a special rubber box. It protects the product from moisture and other negative factors, which may reduce its service life. This design cleans glass more effectively, but is quite heavy.

Principles for choosing a courier service

Determine what tasks the courier service should solve. Delivery of clothing and furniture are different. In the first case, additional services such as fitting or partial return of the order will be required, and in the second we are talking about large-sized goods, which will require a loader and a large car to carry. Therefore, consider the additional services that buyers will require.

Match delivery promises with your resources—are there people who will take the order, prepare it for shipping, and package it?

The ideal type of delivery is when the delivery method is suitable for the ordered product, and the site offers a service that is available in the client’s city, within a time frame that is suitable for him, which you and the service provider are able to provide.

There are six delivery types in total:

"Post office",
courier,
express courier,
courier transport company,
parcel lockers,
pick-up point.

"Post office"

At the same time, Russian Post has a very long delivery time, and its delivery times are often not met. There are no additional services - the buyer will not be able to try on clothes and refuse part of the goods. The percentage of non-repurchase of orders is high.

There are several ways to work with Russian Post: you can send parcels as an individual or enter into an agreement. If you don’t want to go to the department for every parcel, you can contact special companies that will pack the goods, send them via mail, and find out the tracking number. Most often, the last method is the easiest, but such work costs extra money.

Express delivery

The main advantage is the possibility of delivery to the door and greater efficiency. Depending on the specific company, there may be additional services, including fitting or partial purchase of the order. Compared to Russian Post, the failure rate for courier delivery is lower.

Urgent courier delivery

It will be needed to satisfy the most demanding customers. The main disadvantages are the high cost and the high risk of refusal of the goods if the courier violates the delivery deadlines.

Pickup points

This type is similar to Russian Post, but with several differences: the delivery geography is smaller and such points are usually provided by commercial companies. The buyer is not tied to time - he will pick up the parcel when he has free time. Sometimes additional services are available.

At the same time, the percentage of unpurchased orders is higher than when delivered by courier service. If the network of pick-up points is small, then this method will be ineffective: it is easier for the buyer to go to the Russian Post and stand in line there than to go to the other end of the city.

Parcel terminals

A relatively inexpensive delivery method with a wide selection of points in major cities. True, you will have to refuse additional services, and the size of the parcel will be limited by the size of the cell.

What should be the size (length) of the VAZ 2107 wipers

The standard length of the wiper for this model is 13 inches (33 cm) , if desired, you can install a cleaner whose size is slightly larger; 14 and 15 inches will do. However, when installing larger wipers, it is worth considering that their mass is greater, and the motor that drives them will begin to experience increased loads, which will lead to its rapid failure. Replacing the product will cost many times more than purchasing and installing purifiers of suitable size, and will also take a lot of time.

Troubleshooting common problems

Tire and wheel sizes for VAZ 2107 2000

Basically, all cases related to the repair of windshield wipers are simple and the repair can be done independently, perhaps except for replacing the trapezoid, but this is only due to the inconvenience of the work being performed.

The first thing you need to start with is to check the serviceability of the fuse in the mounting block F2. If it is working, check the presence of voltage on it using a test light or multimeter. Lack of voltage indicates a malfunction of the mounting block.
You can check the incoming voltage to the three-position wiper switch by removing the decorative trims from the steering wheel or on the relay connection block. It should be constantly present on the black and yellow wire; by moving the switch to different positions, we check the voltage on the gray and red wires. The absence of voltage on any of them indicates a malfunction of the switch. The presence of voltage indicates a malfunction of the relay or wiper motor.
When the wipers stop working intermittently, the culprit may be a faulty VAZ 2107 wiper relay. The wiper relay on the VAZ 2107 is located near the trunk opening handle, under the panel. First of all, you need to check the presence of power on the block; to do this, remove the relay and activate the intermittent mode. The absence of this indicates a malfunction of the three-position switch or an open circuit. If the problem persists when applying voltage, then it is worth purchasing a new relay.
When the wipers stop in the middle of the glass, the problem must be looked for in the drive gearbox. This type of malfunction most often occurs in the cold season, when a car owner tries to turn on windshield wipers that are frozen to the glass. The repair consists of installing a new gearbox.
If the wiper motor does not work when power is applied, then you need to check the brushes and windings for failure or wear.

Which wipers are better

Not only its price, but also its performance depends on what exactly the base of the purifier is made of. The quality of the base plays a major role in cleaning glass from moisture. When choosing a product, you should pay attention to what it is made of. It could be:

rubber coated with graphite;
silicone;
Teflon spraying.

At first, graphite-coated rubber was used in wipers. They do the job well, but don't last long.

Silicone does not withstand low temperatures well, but otherwise always gives good results. 2 times more expensive than rubber ones.

Teflon has proven itself well in operation, but is expensive compared to conventional ones.

The manufacturer of the windshield wipers plays a big role. The highest positions in the ranking are occupied by: Bosch, Valeo, Heyner, Trico.

Taking into account all the advantages and disadvantages of the products, having considered the types of wipers, we can conclude that it is most advantageous in terms of price and quality to use silicone wipers in the frame version.

How to change wipers on a VAZ 2107

Replacing wipers yourself usually does not cause any problems. In order to solve the problem, you need to carefully study the fasteners that are used to fix the frames. Usually this is a metal hook, which is why you need to choose cleaners with a suitable mechanism; for some, special adapter kits are sold that will help if the selected device has a different mount. Replacement usually takes a few minutes: just disconnect the old wipers and put new ones in their place. The mount has a latch that simply snaps onto the pin. It’s worth checking how the connection went; if it holds tightly, you can use cleaners.

Conclusion: there is quite a large selection of wipers for the VAZ 2107; they may differ in price and quality. You should not buy the cheapest products, as they usually wear out faster since they are made from inexpensive materials.

Installation of ESP Katran

So, I was ready for ESP. On Saturday morning I bought a Katran ESP kit for 2105-2107 and installation began. A few words about the ESP itself. It is a scissor lift. The entire structure, except the motor housing, is metal and gives the impression of being quite durable. The kit includes: — 2 ESPs for the left and right front doors; — two buttons for lowering and raising the windows; — wiring harness with connectors for buttons and motors; — a set of bolts, nuts and washers needed during installation; — two plugs on the door panels that cover the holes from the window handles; The buttons in the original configuration are designed to be installed somewhere approximately in the middle of the torpedo (possibly in the beard). This can be seen from the length of the wires between the button and motor connectors. In addition, there are only two buttons, that is, they are installed so that the driver can reach the passenger button.

Dimensions of Lada 2107 wipers, recommended sizes of windshield wiper blades

The car has not been produced for more than five years. But purchasing wipers of any type is not difficult. Moreover, the universality of fastening and common length allow you to avoid problems during selection and installation. The size is the same on the driver and passenger sides.

Factory dimensions of wipers on VAZ 2107:

Initially, the manufacturer equips the VAZ 2107 with frame windshield wiper blades.

The main type of fastening for wipers is a hook.

Dimensions of wipers for a sedan:

Driver's side: 330 mm (13″).
Passenger side: 330 mm (13″).

Important: if you replace a VAZ with this model, you can install cleaners whose size is slightly larger than the standard ones - 14 or 15 (inches), but this may negatively affect their operation.

All types of wipers can be installed on the VAZ 2107 - frame, frameless, winter and hybrid.

Operating principle

Replacing the windshield wiper blade.
how to remove the windshield wiper blades On a VAZ 2107 car, the windshield wipers are driven by a 12 V electric motor. A relay is installed in the windshield wiper switching circuit. It is responsible for the intermittent operation of the wipers, which work without interruption or at intervals of four seconds.

The windshield wiper is connected in parallel through the contacts of the closer. They are located in the gearbox housing and are “responsible” for returning the brushes to their original position and abruptly stopping the motor. The driver controls the operating mode of the windshield wiper using the switch. The whole mechanism works thanks to a motor. It is prohibited to operate a car with faulty wipers, so car owners must ensure that they are in good working order. And in bad weather, driving with non-working wipers is very dangerous!

Main types of wipers

If previously wipers or brushes for cleaning the windshield had only one type, today such products come in various shapes, types, and sizes. From the factory, the VAZ-2107 is equipped with standard windshield wipers, the shelf life of which is no more than 20 thousand km. Of course, it is wrong to tie brushes to the mileage of the car, so it is necessary to change products when they do not cope with their main task.

The wiper itself is a structure that is based on a body and a working element. The working element is the windshield wiper, and the housing is necessary to support this structure. Although today there are the following types of windshield wipers that can be installed on the VAZ-2107:

frame;
frameless;
hybrid.

In fact, they are all universal, with the exception of modern foreign cars, where one element differs in size from the other. Let's look at how these types of brushes differ from each other.

Other names:

The 4-door VAZ 2107 sedan was exported under the names Lada Nova, VAZ 2103, VAZ 1500, Lada Riva, Lada Signet, Lada 1500.

Years of production years of production of all modifications of the model: 1982-2014.

Frame, frameless and hybrid for VAZ-2107

The frame type of wipers is a system based on rocker arms and levers. This system is called a frame, which has two purposes:

Ensure that the product is pressed tightly against the windshield.
Hold the wiper element.

The quality of glass cleaning depends on the degree of pressing of the edge to the glass, but the wear of the wipers also depends on this. When the graphite layer wears off, the structure will cause small scratches to the windshield. Although standard products are reliable, they have a short service life. The entire design of frame wipers is not reliable enough, since the hinges, levers and rocker arms wear out very quickly when exposed to moisture and the sun. In addition, frame wipers are negatively affected by cold and ice, as a result of which they simply become ineffective.

After their appearance, frameless materials simply amazed us with their extraordinary nature. They are materials with a working edge, but without a frame base. The role of the frame, or rather the clamping mechanism, is performed by a spring base. This option has the following disadvantages:

Although products have a longer service life than frame materials, this period does not exceed several seasons; high cost of products, 1.5 times higher than standard materials;
lack of versatility, therefore, when purchasing frameless wipers, it is important to find products that were manufactured directly for the VAZ-2107.

Not having a frame

The hybrid version of windshield wipers is the same frame wiper, only packaged in a special rubber body kit. Thanks to this body kit, the design of the product is protected from the penetration of snow, water and dirt. This has a positive effect not only on the quality of cleaning in winter weather, but also extends the service life of the products. The disadvantage of the product is that it is massive, so it is not very comfortable to ride with such brushes.

For the VAZ-2107, the best option is to install frameless windshield wipers, but if you really want to experiment, you can try other types of products.

They have a frame, but are covered with a cover

So why isn't the washer working? Common Causes

Washer fluid level. In this case, everything is quite simple, we check the level of washer fluid in the tank, and then add it to the level if it is low, or continue to look for the problem.
The washer was frozen. With the arrival of cold weather, many people forget to replace the washer fluid, as a result of which it simply freezes in the tank. As a result, when you try to clean the windshield, nothing happens, the engine hums, and no fluid flows. In this situation, all the blame falls on you, since you did not timely replace the summer fluid with the winter one. You can correct the situation by heating it, or by adding 200 grams of alcohol or a special defroster to the tank.
Hoses. Damage to the fluid supply hoses or a simple hose slipping off the fitting may result in the washer not being supplied when pressed. You can check what's wrong by looking under the hood or driving into the inspection hole. If the hose is damaged it should be replaced, I guess that makes sense!?
Injectors. No, we are not talking about fuel injectors, but about those that spray washer onto the glass. Sometimes the washer nozzles become clogged or freeze, after which the operation of the system may be disrupted. It is quite simple to check whether the injectors are to blame for the fact that the glass washer does not work. We remove the supply hose from the washer nozzle fitting, then activate the washer and see if the fluid is supplied. If fluid flows through the hose, the injectors are most likely clogged. The “forces” become clogged with dirt, sand, rust, ice, and anything else. The solution to the problem is the following - either wash them or replace them.

Fuse. Sometimes the washer motor does not work due to a blown fuse. In this case, your task is to find the appropriate fuse and check its integrity. We replace the failed fuse and check the operation of the washer.
Wiring, terminals and contacts. Sometimes the washer motor (pump) does not work due to poor contact or a broken circuit. For example, the wiring may be damaged or the terminals of the motor itself may rust or oxidize, making it impossible to supply washer.
Switch. It is rare, but it still happens that the glass washer does not work precisely due to the fault of the button (switch) itself that activates the device. A multimeter or an electrician will help you understand what’s going on; we connect the electrodes and “call” the wiring and the button itself.
Motor (pump). If you do not hear any sound when you press the button, the washer pump may be faulty. This conclusion can only be made after you have ruled out all of the above options. The pump is checked using a multimeter or tester; for convenience, it is advisable to dismantle the device.

How to change wipers on a VAZ 2107

How to repair a windshield wiper yourself

The essence of how to repair wipers on a VAZ 2110 is to fix the levers or deformed wiper rods. Often the reason is due to contamination of parts. If it is impossible to repair the wipers, then they must be completely replaced. Often the cause of the breakdown can be the gear motor, and if you replace the gears in it, clean the contacts of the commutator or limit switch, everything will work. If it is not possible to repair the gearmotor, it will have to be replaced with a new one.

Step-by-step process for repairing a gearmotor

All work must be done in order and nothing should be missed:

remove the windshield wiper (on the VAZ 2110 it is completely removable);
unscrew the nut securing the leash;
remove the leash itself.

removing the arm from the windshield wiper

Let's go further and continue repairing the VAZ 2110 wipers:

it’s the turn of the gearmotor (it is sometimes wrapped in a thin leather film that needs to be removed);
unscrew the three gearmotor bolts, marked with arrows in the top photo;
remove the black plastic cover by unscrewing two screws;
After removing the cover, unscrew the following screws.

Removing the windshield wiper motor gearbox VAZ 2110

We continue and by the way, it is also possible to repair wipers on the VAZ 2107:

take out the plate with 3 contacts located on it;
then remove the brown gasket;
we see the design of gears and rollers;
remove the largest gear together with the roller, revealing a plastic washer underneath it;
We remove two small gears, which must be marked before removal (this is done so as not to confuse their original location, because they do not have the same inclination of the teeth).

Removing the gear motor of a VAZ 2110 windshield wiper

Go ahead:

disconnect the gearbox from the electric motor by unscrewing two screws located oppositely;
remove the armature from the metal housing of the electric motor;
At this stage, you should thoroughly clean all parts from dirt and old grease (use a rag soaked in acetone).

Cleaning the wipers of the VAZ 2107, the repair of which can also be carried out according to this scheme, requires care and a detailed inspection:

press with your fingers on the three brushes located in special holders (they must move freely, and if they go down tightly, then there are defects or cracks and they need to be completely replaced);
We check three springs, which should be straight, without stretching or breaking.

gearmotor springs

We continue the repair of VAZ 2107 or 2110 wipers by inspecting the collector. For this:

inspect it for damage, scratches or dirt;
in case of severe contamination, it is recommended to go over with fine sandpaper (if this does not give any results or it is already clear that the collector is very worn, the entire armature or the entire gearmotor will need to be replaced);
We inspect the gear teeth of the gearbox and replace them if gross scratches or other defects are found;
if defects are found on the threads of the lever rollers or brushes, then the complete set of rods must be replaced;
inspect the limit switch plate and, if necessary, rub sandpaper along it;
we inspect the fastening of the leash, or rather its black rubber pads (if they have lost their elasticity or burst, you need to replace them with new ones - replacement is carried out by removing the internal steel spacer sleeve);

On the VAZ 2109, windshield wiper repairs are carried out in the same way, that is, they start with the gear motor. So, let's continue:

we assemble the windshield wiper, having first lubricated all the parts well (you should especially pay attention to the shaft worm of the armature and gears - use Litol-24 lubricant, and put the marked gears in place exactly); install an anchor by tying the brushes with wire to the contacts (this stage of work is carried out in order not to bend the brushes and therefore they must be folded); we mount the anchor into the gearbox housing very carefully; We install the electric motor housing on the gearbox, holding the armature shaft; untie or bite off the wire holding the brushes and knock on the gearmotor with a wooden hammer to center the bearings; We install the leash back on the axle, which must be in a horizontal position and proportional to the central rod.

So:

shaft rotation speed, if the voltage is supplied to 14 V is low - thirty or forty;
shaft rotation speed of a higher value - seventy;
current consumed at first speed – 3.5 A;
at second speed – 5 A.

Replacement

The process of replacing the wiper on this car does not cause problems. It is carried out in two stages:

install the wiper arm in a vertical position - perpendicular to the windshield;
Carefully, squeezing the plastic fastener on both sides, wiggle the wiper away from the hook.

If you no longer plan to use a used wiper in the future, you don’t have to stand on ceremony with it. And pull it out with a jerk. If the driver plans further use: all operations must be performed carefully. Plastic becomes brittle from prolonged use in the sun. Temperature changes make it fragile. If possible, replacement should be carried out at above-zero temperatures: the likelihood of breaking fragile plastic will be reduced to a minimum.

High-quality wipers that perform their function well are the key to good visibility. Therefore – safety on the road. It is important to promptly change windshield cleaning blades. This will help you avoid accidents and other problems on the road.

Common faults and solutions

The reasons why wipers do not work on cars, regardless of whether it is a UAZ or a S7, are basically the same. Below are the malfunctions and methods for eliminating them.

The wipers do not work in both modes.	In this case, you should check the fuses. If they are burnt out, they need to be replaced with new ones. If only the contacts have oxidized, you need to pull out the fuses several times and put them in place. It may be necessary to replace the VAZ wiper trapezoid.
Brushes do not work only in intermittent mode.	In this case, you first need to check the power supply. If there is voltage, then the cause of the breakdown is in the relay.
The wiper switch is faulty	Change three lever switch
The wipers work, but when turned off they remain in an arbitrary position. The reason may be a breakdown of the gearbox, since it contains a limit switch.	It is necessary to clean the contacts or bend the switch plate. If necessary, the gearbox should be replaced.
The electric motor does not work.	In this case, you need to dismantle the electric motor and check the condition of the windings and brushes.
The brushes do not move when the gearbox is running.	The gear teeth are broken and need to be replaced. The crank may be loosely secured to the gear; you need to tighten the fastening nut.

The problem is mainly mechanical - the trapezoid breaks. When repairing wipers, many replace standard products with frameless ones. They have an attractive appearance, adhere better to the glass, and do not have hinged joints, so they are not affected by dirt and icing.

Frameless brushes for cars

The design of a glass cleaner is a complex mechanism consisting of a large number of parts. Any of them can fail, which will lead to either a complete failure of the mechanism or poor cleaning of the glass.

Which wipers are better

rubber coated with graphite;
silicone;
Teflon spraying.

At first, graphite-coated rubber was used in wipers. They do the job well, but don't last long.

Silicone does not withstand low temperatures well, but otherwise always gives good results. 2 times more expensive than rubber ones.

Teflon has proven itself well in operation, but is expensive compared to conventional ones.

The manufacturer of the windshield wipers plays a big role. The highest positions in the ranking are occupied by: Bosch, Valeo, Heyner, Trico.

Graphite and silicone products

The rubber base of the brush plays an important role in cleaning glass. The quality of windshield cleaning depends on the base. If previously brushes were made only with graphite coating, today silicone and graphite coatings are also popular.

Based on repeated reviews from car owners and experts, it was found that silicone behaves poorly at both low and high temperatures. Teflon coatings are generally considered some kind of nonsense, since their operating efficiency is equal to zero.

To summarize, it is important to note that if you cannot find frameless wipers for a VAZ 2107, then it is best to purchase standard products. To extend their service life, in winter, before traveling, clear them of snow and ice (you can install hybrid products during winter). If you want to achieve high quality windshield cleaning, then you need to change the blades as often as possible - at least once a year.

Repair of car heater fan motors in North-East Administrative District, Northern Administrative District and North-Western Administrative District

How to remove and change windshield wiper blades?

You can repair or replace stove motors in the North-East Administrative District (Altufyevo, Babushkinskaya, Bibirevo, Botanical Garden, VDNKh, Vladykino, Medvedkovo, Otradnoe, Sviblovo Timiryazevskaya), Northern Administrative District (Airport, Vodny Stadium, Voykovskaya, Dynamo, Rechnoy Vokzal, Sokol) and North-Western Administrative District (Tushinskaya, Spartak, Skhodnenskaya, Shchukinskaya, Planernaya).

Problems with the electric motor can occur both electrically and mechanically. It's worth starting the check by checking the electrical circuit. In the motor itself, the most typical electrical failure is wear of the brushes.

Specialists will come to your aid and repair the heater motors in the shortest possible time. Repair or replacement of the stove motor in the North-East Administrative District (Altufyevo, Babushkinskaya, Bibirevo, Botanical Garden, VDNKh, Vladykino, Medvedkovo, Otradnoe, Sviblovo Timiryazevskaya), Northern Administrative District (Airport, Vodny Stadium, Voykovskaya, Dynamo, River Station, Sokol) and North-Western Administrative District (Tushinskaya, Spartak, Skhodnenskaya, Shchukinskaya, Planernaya).

You can find out the current price for repairing the heater motor in Moscow (North-Eastern Administrative Okrug, Northern Administrative Okrug and North-West Administrative Okrug) of your car by calling our managers