Bulbs for foglights of the VAZ 2114: approaching the choice correctly

As you know, traffic safety is greatly influenced by the quality of road lighting. At the same time, fog lights can provide a noticeable improvement in visibility in difficult weather conditions (rain, fog, etc.)

Drivers also actively use PTF in the dark as a supplement to the head beam or high beam. However, not all cars are equipped with fog lights from the factory. Unfortunately, the popular VAZ 2114 and VAZ 2115 may not have PTF.

Naturally, owners of such cars often install fog lights themselves. Next, we will look at which fog lights for the VAZ 2114 are better to choose, what to look for when purchasing fog lights for the VAZ 2115, etc.

Installation

The PTF installation process can be divided into three main stages:

• Installation of headlights;
• Network connection;
• Functionality check.

So now we will talk about each stage separately.

Installing headlights

We will consider the option of installing PTF on a standard bumper. Therefore, it does not have holes for new optics. You will have to do them yourself.

To work you will need a certain set of tools and materials:

• File;
• Drill and drill bits;
• Electric jigsaw;
• Roulette;
• Marker.

Elements for connection
Now about the work itself.

1. First of all, remove the bumper. Work is performed only if it is disconnected from the seat.
2. Remove all dirt from the bumper.
3. Make markings for the installation of future fog optics.
4. It is best to mount the headlights slightly to the side of the lower air intake. Try to place the PTF strictly under the main optics of your car.
5. For decorative glasses that have outer and inner halves, make markings. The outer half is decorative, and the inner half is designed to fix the outer part and headlights.
6. The outer part of the glasses has a protrusion on the inside. With this mounting protrusion, the element should fit into the hole made in the bumper.
7. To determine the optimal dimensions, you should measure the landing protrusion. This way you can make the appropriate markings on your bumper.
8. Using an electric jigsaw, holes of the required size and location are cut.
9. Use a file to file the cut areas.
10. The outer part of the glasses should eventually fit tightly into the hole.
11. Fog lights are mounted in the resulting holes. For this purpose, the kit includes special mounting bolts.
12. Attach decorative glasses to the top of the headlights. The bumper can then be returned to its place.

https://youtube.com/watch?v=X6G0ROEQxUE

Connection

Together with the PTF, a diagram for connecting the devices must be attached. It is not complicated, so even a beginner will be able to understand all the nuances of connecting the components to each other.

You will need to embed the wiring from the foglights into the mounting block, which is located in the engine compartment to the right of the windshield. To do this, just unscrew the bolts from the block, lift it and find the pads marked Ш7 and Ш8.

These blocks are used to connect fog lights, although these lighting devices are not installed standard at the factory. Wiring from the headlights and from the fog lamp relay, which is provided in the purchased PTF kit, is connected to these blocks.

Your job is to make the correct connection. This is done according to the following scheme:

• The output wire from pin 87 is ground, so you need to connect it to the car body;
• Pin number 85 goes to the block marked Ш7 and is connected to connector number 17;
• Pins numbered 30 and 86 go to block Ш8. In this case, connect pin 30 to connector 8, and lead 86 to connector number 1;
• Having installed the headlights, stretch the positive wire through the engine compartment, as they are connected to the Ш8 block. But these wires need to be inserted into connectors numbered 2 and 3;
• Now connect the block to the mounting block, and return the block to its place;
• Select an area near the block where the fog light relay will be installed.

Connection result

Button

Now all you have to do is connect the control system for your PTFs. Included with the fog lights is a corresponding button, which will stand on the panel in the seat provided by the manufacturer.

PTF button

The manufacturer, that is, AvtoVAZ, provided for this. Therefore, under the panel you will find a control block. The panel is removed, the corresponding block is located and the button is connected to it. That's it, the controls are ready.

Examination

The last stage is to check the functionality of your PTFs.

To check the efficiency of the lighting devices, turn on the headlights on your VAZ 2114, then press the button to turn on the fog lights. When the lights are turned off, even if the fog lights button is pressed, they should still go out.

The importance of PTF is difficult to overestimate. They help you see the road better during fog, rain, and snow. Moreover, fog lights are designed to improve the visibility of your car to oncoming and behind vehicles. Therefore, we strongly recommend installing PTF not only in front, but also in the rear.

Loading …

REASONS FOR LACK OF LIGHT

So, we have found out where the headlights and their unit are installed and how they are located in the car, now we will figure out why the low beam does not light up.

The main reasons are:

• Lamp failure;
• Burnout or failure of fuses;
• Oxidation of contacts on wires;
• The power button is broken.

The lamps that are equipped with the VAZ 2114 from the factory assembly line are ordinary halogen lamps, with two filaments inside. In fact, the same light bulb is a source of both low and high beam - just one or two filaments are lit at once. Other machines may use different lamps for each type of light, and the diffuser may be movable and controlled by a computer. The solution is simple - replace the light bulb with a new one; we’ll talk about how to do this without breaking anything else.

OTHER PROBLEMS

The fuse also burns out just as often, which is why the low beam headlights do not light up. A standard fuse is a plastic case on two copper legs that are inserted into the block. Inside the housing there is a wire made of semiconductor material, which, if the current or voltage is too high, simply burns out and the voltage surge does not affect the headlights. The fuse is simply replaced with a new one.

Wires are also checked for oxidation quite simply - near the fuse box, you need to carefully inspect all the pads and relays, remove rust, and if there are disconnected cables, fix them in place. To check the button you need to find any other one and connect the control wires to it. If the headlights come on, then you just need to replace the button with a similar new one.

K9 – low beam relay, don’t forget

Features of PTF: difference from headlights

So, the main task of fog lights is to illuminate the road in poor visibility conditions (rain, snow, fog, etc.). However, unlike the head light, there are features.

First of all, PTFs must have the clearest possible upper cut-off line, and the beam of light must be strictly below and be as wide as possible. If these conditions are not met, this can become a problem both for the driver of the vehicle and for other road users driving in the oncoming lane.

We also note that even if the headlights have the most powerful lamp, the features, purpose and installation location of such headlights do not allow them to effectively illuminate the road in fog or rain.

The fact is that the head light should illuminate the road as far as possible, not blind oncoming drivers and cover the side of the road. However, in conditions of limited visibility, neither high nor low beam can cope with this task. The reason is that a powerful luminous flux is reflected from moisture particles, causing a cloudy “wall” to appear in front of the driver. This is especially noticeable when the high beams are turned on.

In turn, high-quality PTFs are characterized by lower power, and the optics themselves are made and installed so that the light from the fogs literally “breaks through” moisture and fog. The main secret is that usually the fog does not touch the ground, and the fog lights are as low as possible. On the one hand, fog lights do not shine as brightly and far as the headlights, but in poor visibility conditions they illuminate several meters of the road in front of the car. The main thing is to follow the rules for installing PTF and setting up such optics.

In a nutshell, there are clear norms and standards that must be adhered to during installation. Additional adjustments allow you to set the fog lights so that the light flux falls on the road, does not blind the driver, does not form a “wall” in the fog in front of the car, etc.

At the same time, it is important to understand that cheap and low-quality PTFs, as well as incorrectly installed fog lights of a VAZ or any other car, will blind oncoming cars, but are not able to fully illuminate the road

For this reason, when selecting fogs, first of all, you need to pay special attention to this optics

Process Features

To ensure that the process of dismantling and replacing the lighting component is successful, make sure that there is no condensation in the reflector unit.
If you still find moisture in the block, clean the drainage channel, which you can find near the mounting of the turn signal light (on the left or right of the car). We can give some more advice to motorists:

• take into account the interval from the moment the vehicle's lighting system is turned off. Do not start work immediately after turning off the lighting system, as this may cause burns;
• Whatever lamp you replace (xenon or halogen), wear protective gloves;
• Do not replace lighting elements with overly powerful ones, as they can lead to failure of the lighting device.

Lighting

Since the staff bumper does not have seats, they must be made by yourself. To do this you may need:

• Drill with a drill;
• Electric puzzle;
• File;
• Measuring instruments (tape measure, ruler, etc.);
• Marker;

Removing the front bumper of a VAZ 2114

, installation of PTF in
the bumper
, which does not have space for them. Continuation

On our channel you will always find a solution to your problems that you have when repairing your steel

Installation of fog lights is carried out with the bumper removed. Marking is first done on a bumper that has been cleaned of dirt. The optimal installation location is at the level of the lower air intake, but at some distance from it. It is advisable that the PTF be located strictly under the headlights.

First determine the distance at which the fog lights will be removed from the air intake. Then we'll figure out what size holes to cut. Decorative “glasses” will help with this. They consist of two halves. external (decorative) and internal (fixes the external part and the headlights themselves).

The outer half of the glasses has tabs on the inside to fit into the hole in the bumper. To determine the size of the hole, the dimensions of this mounting protrusion are measured. After we place the markings with the appropriate dimensions on the bumper.

Once the markings are complete, we will continue cutting the holes with an electric jigsaw. After this, the edges of the holes must be adjusted using a file

It is important to make sure that the outer part of the glass fits tightly into the hole

In these holes we fix the fog lights with bolted connections. All that remains is to fix the “glasses” headlights.

After installing the fog lights, we install the bumper on the car. This completes the first stage.

The base may be different

Depending on what type of fog lights are installed in YOUR car, there may be a different base. There can be two bases in total: H3 and H11.

To be completely sure, I recommend removing the burnt-out lamp and picking up a similar one at an auto store.

If you know for sure that you have original PTFs manufactured by Kirzhach installed, then the base is H11. Non-original fog lamps, for example, Bosch, work with the H3 socket. But there are also H4s.

In this PTF the base is H4

Installing LED lamps in a standard base

Let's say right away that PTF LED lamps shine worse.

My husband still managed to get the xenon in. Now it’s very cool to drive in the dark, just heaven and earth compared to the factory light.

The lamp base depends on the manufacturer, I personally have Bosch fog lights and have bulbs with an H4 base, but they can also be H3. My light bulbs are made in China, the so-called “halogen xenon”, they shine very well, and most importantly, they are not prohibited in our country.

VAZ doesn’t particularly worry about installing base lamps in the factory fog lights of the VAZ-2114; after all, this is not a premium segment car. The cheapest base light bulbs are available. Therefore, I advise all owners of this model to change them to xenon. Believe me, you will immediately notice a huge difference.

As you know, traffic safety is greatly influenced by the quality of road lighting. At the same time, fog lights can provide a noticeable improvement in visibility in difficult weather conditions (rain, fog, etc.)

Drivers also actively use PTF in the dark as a supplement to the head beam or high beam. However, not all cars are equipped with fog lights from the factory. Unfortunately, the popular VAZ 2114 and VAZ 2115 may not have PTF.

Naturally, owners of such cars often install fog lights themselves. Next, we will look at which fog lights for the VAZ 2114 are better to choose, what to look for when purchasing fog lights for the VAZ 2115, etc.

Read in this article

WHY DO YOU NEED ALL-WEATHER MODELS

There are several types of lamps, one of which is all-weather. The key feature of this type is that during manufacturing a special coating is applied to the inner wall of the bulb, which has interference properties, which gives the light a yellowish tint. This is done to improve the contrast of the illuminated area, especially during bad weather. For example, the light of an ordinary H4 light bulb is strongly reflected from falling raindrops, which often blinds the driver, interfering with visibility. Yellowish light has a lower degree of reflectivity and is less irritating to the eye when reflected, which is more beneficial for driving in bad weather.

In addition, a car with all-weather h4 lamps is more visible on the road, both in fog and in pouring rain, which significantly reduces the likelihood of a traffic accident.

Safety is a top priority for all-weather models.

The most common types, as shown by the h4 lamp test, are:

• IPF H4 Superbeam,
• GENERAL ELECTRIC H4 AllDay,
• PHILIPS H4 Weather Vision,
• NARVA H4 Azzurro.

The brightest h4 lamps listed are PHILIPS H4 Weather Vision and GENERAL ELECTRIC H4 AllDay. They show the best results among all-weather ones, however they are much more expensive. All of them are bright enough, but it’s up to you to decide which h4 bulbs are best. It all depends on individual requirements.

How to replace a lamp

Before replacing the light bulb, you need to buy a new one with the same parameters. It is better to choose reliable brands from well-known manufacturers. Before replacing, it is better to lift the car on a lift or jack, or place it over a hole.

1. Remove the negative terminal from the battery.
2. We find the fog lamp power supply.
3. Slide the rubber protection along the headlight.
4. Disconnect the connector and block.
5. We move the spring clips away from the headlight reflector (we remove the loops of the clips from the hooks).
6. We take out a light bulb with a wire.
7. We connect and install a new lamp.
8. We assemble the headlight.
9. Checking the operation of the new light bulb.

The old light bulb is removed along with the wire. The new bulb should have exactly the same wire as the old one.

The lineup

Having decided on the criteria, you can choose fog lights for the VAZ 2114, which ones are better and of higher quality. Of the existing PTFs, the following models are most often installed on the VAZ 2114:

• VAZ;
• Autosvet (Kirzhach);
• Bosch;
• Hella;
• Chinese PTF.

None Avtosvet (Kirzhach) headlights are considered optimal in terms of quality and cost, but when purchasing they need to be checked so that the headlights do not turn out to be fake.

If you install Bosch headlights, they must be additionally sealed in the area of ​​the bolts under the glass, otherwise water may get under the headlights. Hella headlights are considered to have the best performance, but they are expensive.

Chinese headlights are cheaper than all analogues. They are mainly used as a replacement for low beams to indicate navigation lights during daylight hours.

PTF adjustment

Standard adjustment is not provided even on cars equipped with PTF. If several years of operation of a car equipped with PTF have passed, or you installed the headlights yourself, the headlights need to be adjusted, because the direction of the light spot will not comply with the rules.

If changing the angles of inclination in the headlight itself is impossible, use gaskets, linings and other devices. A special stand is required to carry out the work. If you wish, you can draw the same grid on the garage as on the stand and adjust the low, high beam and PTF yourself.

The best bulbs for fog lights

Here are the TOP 5 best lamps from different manufacturers.

LYNX H11

Japanese halogen lamps are characterized by low energy consumption and an average price of about 400 rubles. The rich yellow light illuminates the road well at night in any weather.

You should be careful with LYNX light bulbs - there have been defective products.

KOITO WHITEBEAM III H8

The brightness of KOITO halogens is as close as possible to standard xenon. The Japanese manufacturer combines increased brightness and a natural yellowish tint. The disadvantages include the high price (two thousand for a pair of lamps) and cases of fakes.

These lamps are installed in both foglights and headlights.

PHILIPS H27W STANDARD

The use of quartz glass and a special filter helped manufacturers increase the service life of the consumable. At a really low price - about 200 rubles - halogens have a good luminous flux with a yellowish tint. The color temperature of the lamp is 3200K.

OSRAM ORIGINAL LINE H27

Permanent sales leader in the automotive lamp market. Average price, excellent quality and long service life. Such lamps are installed as standard in Audi, Mercedes, and Toyota cars.

Recently, many fakes of poor quality have appeared on the Russian market.

CATZ H8 CB802

Japanese engineers came up with a special glow. A special filament and gas filling the bulb provide the lamp with a very bright glow and a long service life. The main disadvantage of these Japanese consumables is the very high price, more than five thousand rubles. Perhaps later the manufacturing technology will become more widespread, and lighting devices will become more accessible.

Every driver of a motorcycle, car, or truck feels discomfort when driving in foggy weather. Since visibility is low, you can end up in a ditch, collide with an oncoming vehicle, or hit a pedestrian. In such cases, fog lights come to the rescue, illuminating the road and roadsides low and widely. After studying the rating, drivers can choose some of the best PTFs for their car, which in the long run will save a lot of nerve cells, and maybe even someone’s life.

How to choose foglights VAZ 2115 and PTF VAZ 2114

Let's start with the fact that there are several types of fog lights. More precisely, there are two types: regular and universal PTFs. It is important to understand that their effectiveness greatly depends on the quality of the fogs themselves.

Let's move on. Standard PTFs can be original or analogues. In any case, they are produced for a specific car model, have similar mounts, housing, etc. Such PTFs are the easiest to install, especially if the bumper already has places for installation, covered with plugs.

Universal PTFs have a mount that allows them to be installed on different car models; such fog lights can be installed in the area of ​​plugs on the bumper, on the radiator grille, hung on the bumper, etc.

• Headlights are also divided according to the type of lamps installed: “classic” halogen, more modern xenon or recently introduced LED. PTFs with a halogen lamp are the most affordable, perform well in difficult conditions, provide a soft and warm yellowish glow, which is best suited for rain and fog.

• PTFs with a xenon lamp shine brighter than halogen lamps, the service life is also 50-60 or even 80-100% longer (provided that high-quality lamps are used). However, the cost of the equipment is much higher; for such lamps it is also necessary to install separate ignition units, correctly connect xenon, etc.

Also, brighter xenon light, which is better than halogen lights on a dry road, often provides worse visibility in fog and rain, since the color temperature is slightly different from halogen headlights, even for xenon analogues that are as close in characteristics as possible.

It is also worth noting that the brighter xenon glow can cause blinding oncoming drivers. Taking into account this feature, PTFs with xenon need to be lowered lower, constantly monitor their adjustment, keep the headlights clean and do not turn on the fog lights under normal conditions (when there is no fog, snow or rain).

• LED PTFs are more economical in terms of energy consumption and place less load on the battery and wiring. The service life of good quality LED PTFs is usually longer than halogen or xenon ones.

The downside is the high cost of high quality products. Additional requirements should be taken into account during installation, since in case of installation errors or poor ventilation, the LED headlights can become very hot, which renders them inoperable.

Useful video

You can glean additional interesting information from the video below:

If you have already changed the bulbs in the VAZ 2114 foglights, the process will only take a few minutes. On some models, the PTFs are combined with head optics, so to replace the lamp you need to disassemble the main headlights.

PTF frames for VAZ 2113, 2114, 2115 in body color

with 15% discount

Straight eyelashes in color for VAZ 2113, 2114, 2115 headlights

with 19% discount

Rubber mats for the interior of VAZ 2108-21099, 2113-2115

with 9% discount

Freebie! Silent door lock bolts with silicone insert for VAZ 2108-2115, 2110-2112

with 19% discount

Wiring for connecting fog lights (PTF) on VAZ 2113, 2114, 2115

with 13% discount

Set of heating elements for side mirrors VAZ 2108-21099, 2113-2115

with 19% discount

Set of silent door locks PtiMash for VAZ 2109, 21099, 2110-2112, 2114, 2115

with 9% discount

Set of seat back adjustment knobs with holder for VAZ 2108-2115, 2110-2112, Lada Priora, 4x4 Niva

with 19% discount

Original brake light in spoiler for VAZ 2110, 2112, 2113-15

with 17% discount

These PTFs are intended for VAZ 2110-12, 2113-15 vehicles. Installed in standard places without any modifications.

These PTFs are intended for VAZ 2110-12, 2113-15 vehicles. Installed in standard places without any modifications.

These PTFs are intended for VAZ 2110-12, 2113-15 vehicles. Installed in standard places without any modifications.

These PTFs are intended for VAZ 2110-12, 2113-15 vehicles. Installed in standard places without any modifications.

What's the result?

Taking into account the above information, it becomes clear that the decision to install fog lights on a VAZ 2114 or VAZ 2115 allows you to improve road lighting at night, in difficult weather conditions, etc. As practice shows, the presence of fog lights allows for better illumination of the roadside; when driving in conditions of insufficient natural or artificial lighting, the strain on the driver’s eyes and overall fatigue while driving are noticeably reduced.

High-quality fog lights significantly help the driver in poor visibility, in particular when, due to fog, the light from the main optics is completely reflected, forming a “white wall”. And their correct operation depends on what kind of bulbs you installed in the VAZ 2114 foglights.

The VAZ 2114 is not equipped with standard fog lights. But the market now offers a very wide selection of different options that can help solve this problem:

1. Ready tuning bumper with PTF.
2. The bumper is from the older model 2115 with sockets for fog lights.
3. Installation of ready-made PTF and facing elements.

Installation of ready-made PTF with facing elements is extremely popular. When choosing PTFs, pay attention to their power and the types of lamps that can be installed.

Why the interior light does not work on the VAZ-2114: main reasons

What to do when the light suddenly goes out in the interior of a VAZ-2114? Many motorists will say - go to an electrician and let him sort it out. But we will try to find the cause and methods of elimination when the interior lighting goes out ourselves.

Why the light in the cabin does not light (main reasons)

Car electrical circuit diagram, which must be studied before starting work

Car interior lighting is part of the electrical system, and therefore, in any case, it is worth looking for the problem in this part of the car. Of course, it is recommended to study, at least superficially, technical electrical diagrams in order to be at least a little up to date.

So, what do you need? A detailed diagram of the car's electrical components, a little ingenuity and a minimal set of tools. Let's look at places where the problem may be hiding:

Bulb.

Ceiling lamp.

Fuse. Wiring.

We fix the lights and get acquainted with electrics

Since the main fault locations have been identified, you can safely move directly to methods for solving the problem. It is worth noting that with automotive electrics, not everything is so simple, but since this is a VAZ-2114, everything can be said very clearly here. Let's move on to methods for solving the problem.

Bulb

In order to get it out you will have to remove the lamp cover. After this, you need to check whether there is a filament, and insert the lamp into the control device or simply connect it to the battery. If the lamp lights up, then it is not the cause of the malfunction.

Ceiling lamp

The problem may be hidden in the ceiling lamp

To diagnose it, you will need to remove it from the car and visually inspect it. It is also recommended to ring the contacts going from the lamp to the wiring.

Fuse and relay for VAZ-2114

Replacing the fuse may solve the problem

The next reason is a blown interior lighting fuse. This part can burn out due to a short circuit, which for various reasons occurs in the on-board circuit. Often the short circuit is caused by a malfunction of the lampshade.

The interior lighting relay is marked with an arrow. Often the contacts burn out and prevent the light from turning on.

Wiring

Broken wiring may cause a malfunction

Electrical wiring is every car enthusiast's nightmare. For some, everything is clear, but for others, it’s a “dark forest.” So, during diagnostic operations, it is necessary to ring the wires going from the lampshade to the power supply or button.

There are few reasons for the malfunction of the interior light in the VAZ-2114, and every novice car enthusiast will be able to determine the cause of the malfunction. It is worth remembering that if a car enthusiast is not sure that he can deal with the problem, then it is best to contact a car service center.

Replacing headlight bulbs

• Disconnect the on-board power supply. To do this, you need to disconnect the negative terminal from the battery.
• Open the engine compartment.
• Unscrew the two fasteners from the back of the headlight.
• Remove the protective cover.
• Disconnect the electrical connector.
• Unclip the spring securing the lighting element to the seat.
• Remove the lamp.

Assembly is carried out in reverse order. When installing a halogen lamp, do not touch the glass bulb of the product with your hands.

After the new part is installed, you need to connect the negative terminal to the battery and check the functionality of the headlight.

VESKO-TRANS.RU

AutoNews / Reviews / Tests

Which fog lights are better to install on a VAZ 2114

We found out which PTFs are best suited for the VAZ 2114. Good road lighting is very important for a smooth ride. Fog lights provide better visibility in bad weather

Even today they are used for a better look as a complement to the high beams. So at some point the question is, which PTF is better for the VAZ 2114?

VA series 1 2114

there was no fog. In the latest modifications, of course, cars that come with PTF and others have plugs for installation.

There are drivers who are satisfied with the regular version of the PTF on the VAZ. Unfortunately, most of them search and communicate to choose the best model for their car.

Types of fog lights

Fogs 4.5 types:

Headlights are made for a specific car model with the same supports and body as the original.

Universal headlights have mounts that allow you to install them on any car in the bumper, radiator grill, or hang the bumper.

Depending on the type of lamp, lights are divided into:

Halogen bulbs are cheaper than other options. However, they tend to burn out and require frequent replacement.

Xenon headlights are better than halogen PTF to illuminate the road

and last longer. But strict light curtains are imposed on oncoming drivers, and they will be fined for being too bright. LED headlights are more energy efficient and don't even have the same battery drain as the latter two headlights. They are durable and provide excellent illumination of the road. If installed incorrectly, in other words, ventilation, LED headlights overheat and become inoperable.

PTF is available in plastic, duralumin and magnesium cases. Duralumin and magnesium options are considered more durable and reliable.

Fog lights are equipped with plastic or glass light lenses. Plastic diffusers wash out over time and let in terrible light, which affects road visibility and traffic safety. If glass diffuser headlights are selected, make sure they are designed for design, you can change them.

If the fog lights

not in use, for greater safety, of course, close them with plastic plugs.

Selection bias

To determine which fog lights to install on the Vase 2114, you need to know the right aspects of choice.

Bumper Fuse Box Fog Lights

.

KIRJACH H1 VAZ 2115 fog lights unpack the car and check

Light. 900 rubles per pair Lighthouse H1 lamp 100% Super light. 200 rubles per pair Installation work. priceless.

1. Strong business. The situation on Russian roads, the headlight housing must be made of a material that is resistant to damage and temperature fluctuations. It is preferable that the design includes plugs.
2. Robust lights and wires, relays and lights included.
3. Wide spot light, uniform light distribution and low scattering and refraction losses.
4. Adjustment and adjustment of the light spot vertically and horizontally.
5. Don't blind oncoming drivers.
6. Easy replacement of a burnt out lamp. Look at the purchase instructions for replacing the lamp. The easier and faster this can be changed, the less time it will take for the lamp to suddenly burn out. Ideally, no further replacement is required after replacing the lamp.
7. Profitability. When selecting headlights, try to avoid excessive electrical and generator loads. Lamps up to 55 W are almost always enough.
8. Thick durable lenses.
9. Excellent aerodynamic characteristics.
10. Compliance with machine design.

and better. Of the available PTFs, in most cases the following models are installed on the VAZ 2114:

What types of fogs are there?

Types of foglights

• Halogen. Relatively inexpensive light sources, in demand among car enthusiasts. The disadvantages include the short service life of the lamps. ...
• Xenon. The characteristics of the light spectrum are better than those of halogen lamps. ...
• LED fog lights
  . The highest price category.

Interesting materials:

How to send a ringtone to an iPhone via iTunes? How to transfer a Word document from a computer to an iPhone? How to transfer video from laptop to iPhone? How to transfer all photos from iPhone to the cloud? How to transfer notes from iPhone to computer? How to transfer sounds to iPhone via iTunes? How to copy an audio recording from iPhone to computer? How to copy WhatsApp chats from iPhone to Android? How to copy photos from iPhone via iTunes? How to copy photos from laptop to iPhone?