Do-it-yourself repair of the outer door handle of a VAZ 2115

Tuning is a common phenomenon among modern motorists. But if some fully fit into the design of the engine, chassis and other units that affect the speed and power of the car, then others prefer external tuning. The installation of Euro handles on the VAZ 2114 is a prime example of this.

Photo of installed euro handles on VAZ 2114

Replacing the front passenger door handle

Photo of replacing the door handle hook, I numbered the photos just in case, in case someone changes the thread, it might come in handy:

Step-by-step instructions for replacing the outer and inner door handles on a VAZ 2115

The elements that open and close the door structures on your car wear out over time. Replacing the VAZ 2115 door handle from the inside or outside may be required due to abrasions, scratches, and deformation. The procedure for removing and installing a new part is different for the rear and front doors, so separate instructions are provided for each situation.

Changing the outer handle

To dismantle and install a new device, you will need the same set of tools. No drilling instructions:

1. The interior euro handle unwinds. The cladding panel is dismantled.
2. The handle nut is removed, then the fastener holding the external object.
3. The thrust rods and seals are removed from the closing mechanism.
4. The handle is removed from the door opening. To do this, remove the nut and pull the handle to the side.
5. The door niche and openings are cleaned of dust and dirt. Metal parts are treated with anti-corrosion agent and silicone.

Assembly is carried out in the reverse order: the product is inserted, the nut and bolts are fixed. It is important to ensure that the hardware is securely tightened.

Before assembling the decorative panel, it is recommended to check the functionality of the device. If there are any shortcomings, the mechanism is refined and adjusted.

Out of stock see availability in other cities

Pickup from a warehouse in Yekaterinburg

Payment upon receipt:

• Cash
• Transfer to card
• By bank card
• By invoice (for organizations with VAT)

Important. Before receiving the product, check its availability by phone or place an order on our website.

Delivery by courier in Yekaterinburg and nearby cities

• Payment in cash upon receipt of goods
• The cost of delivery within the city and nearby cities is 100-250 rubles
• Free delivery throughout Yekaterinburg for orders over 10,000 rubles.
• Please check with the RusAvto manager for delivery times and costs.

For minimum order and delivery costs, see the Delivery section.

Delivery by Russian Post

• Prepayment 30% of the cost of the goods (Cashless payment on invoice)
• The balance of the amount is cash on delivery upon receipt of your goods at the post office.
• Delivery services are paid by the recipient according to the current tariffs of Russian Post.

Why do we ask for partial payment in advance before shipping? In our practice, there have been cases when goods sent by cash on delivery remained for a long time in the recipient’s post office and were not picked up. We were forced to pay for storage and incur additional costs for returning unclaimed goods to our warehouse.

VAZ-2114 owners have repeatedly faced the problem of replacing a door handle. This process is quite simple, but people often get confused with it and, out of ignorance, damage the element itself or a neighboring one. The article will tell you how to replace a door handle from the outside without much effort.

Video about replacing the inside rear door handle (carefully mat):

The video will tell you about the features of replacing a door handle on a VAZ-2114, and will also tell you about the main subtleties and nuances of the process.

Causes of malfunction

Before replacing a part, you should find out the cause of the failure. The main ones:

• damage after an accident;
• mechanical damage to internal elements;
• Hacking attempt;
• failure of the external door opening manipulator;
• pressing hard on the handle.

Most often, the plastic part breaks or breaks as a result of constant opening.

Typical breakdowns and their causes

The interior door handle of the VAZ 2107 is made in black, like the main part of the car’s interior. The wear of this element depends on the activity of transport operation. Over time, scratches or microcracks begin to appear on the device. The filling of the handle dries out, begins to jam, creak, and jam. Damage may be caused by time, an accident, or the door breaking. What can break:

1. The hardware has come off. The fastenings need to be tightened.
2. The door does not close, the gap between the body or body part is widened.
3. Mechanical damage.
4. There was an attempt to break into the car by attackers.
5. The outer manipulator of the mechanism is damaged.

Sometimes the reason is hidden in body deformation or poor door adjustment. If part of the handle is broken, it will have to be replaced completely. This plastic element is non-separable and quite fragile, unlike a Euro pen.

The average cost of a car handle is 900 rubles.

Replacing the inner handle

If the internal door handle of a VAZ 2115 is broken, then cosmetic repairs are impossible. To repair, you will need a standard set of tools: several types of screwdrivers, a sharp knife and a 8mm wrench. It is better to change the part while in the salon. Algorithm for replacing a part:

1. The lining is removed. It is pryed off with the thin end of a screwdriver. It is important to remove all fragments of decor.
2. The door card is being dismantled.
3. The rod is disconnected.
4. To remove the remains of the broken opening device, the fasteners are unscrewed.
5. A new element is installed. It should be attached to the rod, and then the facing elements should be reassembled.

The trim on the VAZ is fixed with special clips. To remove them, you can pry up the edge with a screwdriver. Proceed with caution as they are plastic and may break. This is affected by rough handling, material wear or cold.

Previous posts from the category: VAZ 2114

The CV joint, or constant velocity joint, is an important component in a front-wheel drive car. How to remove the door handle in a VAZ 2115 2114 2113, video. Lada 2114 › logbook › how to change the inside door handle of a VAZ 2114. Its service life was initially designed for long-term operation, comparable in time to the service life of the car as a whole.

Replacing the steering rack on a VAZ 2114, 2115

The steering rack is an important control mechanism in any car. How to change the clutch on a VAZ 2115 manual. If there is any malfunction of this mechanism, an emergency situation may occur, the consequences of which are very difficult to predict. In this video we will look at how to change the clutch on a VAZ 2108. How to disassemble and change the doors of Renault Megane 3: and completely remove the trim and etc. How to change the inside door handle of a VAZ 2114 -. Therefore, we categorically do not recommend using a car with such a malfunction.

Replacing the outside door handle

Replacing the inner door handle of a VAZ 2115 is not as difficult as dismantling the outer element. First you need to determine the fastening method, which is specified in the technical document for the car. It will not be possible to get to the fasteners without removing the casing. Armed with screwdrivers and a 8mm wrench, it is important to follow the step-by-step instructions:

1. Remove trim.
2. Remove the thrust rods from the closing mechanism.
3. Unscrew the external fastening screw.
4. Remove the rubber seals and remove the handle.
5. Inspect and clean the installation site of the new structure.

Assembly is carried out in reverse order.

Replacing the door handle of a VAZ 2115

Replacing the outer door handle of a VAZ 2115 occurs the same way on all cars from VAZ 2108 to VAZ 2115. This video will show how to change a regular door handle to a “euro-handle”.
First you need to disassemble and remove the door panel (door card). To do this, you need to unscrew all the screws and remove the plastic covers, and also disconnect the wire connectors.

Next, you should unscrew the two nuts 8 and remove a couple of handle rods (large and small). After this, you can carefully remove the door handle.

The process of installing a new front door handle on a VAZ 2115 is shown in this video.

Handle selection

Repair will require a new part. The mechanism is sold for the driver's or passenger's door. When purchasing, you should pay attention to:

1. Appearance of the product. Experts recommend taking a closer look at Euro pens.
2. Manufacturer.
3. Material of manufacture. The standard version is made of plastic, but there may be products with additional elements. Some manufacturers add chrome strips.

It is better to purchase AvtoVAZ products. Factory articles: 2109-6105180 – for internal, 2108-6105177 – for external product.