Lada Granta firmware mms 2190 latest version

Firmware MMS 2190 for the multimedia system in the balanced LADA Granta model allows you to significantly expand the functional potential of the built-in device.

Note that the standard version of the multimedia complex, present in the LADA Granta car in the “Standard” and “Norma” versions, does not allow you to perform the list of actions given in this material. To successfully update the dashboard firmware, only the head unit, which is equipped with the Lada Granta in the “Lux” version, is suitable.

The procedure when flashing MMS 2190 firmware provides for the presence of the “GPS” option, and more specifically, the modification of the “Globalsat BU-353S4” receiving module. In addition to it, the “head” must have a 3G modem in the Huawei E1750 model from the Megafon operator. A pair of these devices, combined with advanced software, allows you to implement not only the navigation function previously promised by the VAZ engineering department, but also the coveted Internet. All designated devices are available for purchase on eBay, which is cheaper compared to offers from alternative retailers.

For domestic cars, the navigation option and the Internet are incompatible phenomena, since to ensure their full functioning, you will need to use a USB signal splitting device “DNS ATH-08”.

Firmware for radio Kalina 2/Granta

You will need an SD card up to 4GB formatted in FAT.
In the future, it will be possible to use a card in exFAT format. Attention!

The author is not responsible for all your actions. In addition, flashing the MMC leads to loss of warranty.

Procedure: 1. Copy the firmware to an SD card (up to 4GB in FAT). 2. Copy files from the “FirmWare” folder to the root of the memory card. 3. Remove the flash drive from the USB port. 4. Insert the SD card into the radio. 5. Reboot the GU by long (about 15 seconds) pressing the power button (for Lada Kalina 2) or the volume button (for Lada Granta). 6. A flashing will occur (4 status bars will run through) and the radio will reboot itself into the desktop.

https://youtube.com/watch?v=gCFqgFoW4F4

7. Without rebooting the radio, press the “Recalibrate” button and calibrate the screen. At the end, during the countdown, click on the screen. 8. Reboot the radio with the memory card inserted. The new menu will load.

If, after flashing the radio, the download freezes at the “Lada” logo, then most likely there is a problem with the SD card. Try formatting the memory card to other file systems (FAT32/exFAT/FAT) and flashing it again. You can also try using other SD cards, 4GB or 2GB in size.

How to return to the standard menu of the Kalina 2/Grant radio:

Click on the “Media” icon in the alternative menu.
Reboot the radio, first remove the SD card.

Nothing changes in the standard shell, everything remains the same.

What to do if the system freezes after flashing MMS firmware on the Lada Granta Liftback

check that there are no third-party connections in the USB port;
remove the memory card and create an empty text file called Explorer.txt in the root of the memory card. after restarting the screen will be restored;
remove the positive terminal from the battery for 4 - 5 minutes, then reconnect;
reformat the SD card, rewrite the files again, reflash the system, launch MMS;
replace the SD card with a new one.

If none of the above methods help, we turn to specialists to eliminate the defect.

Firmware for radio

How to set the clock on the dashboard of the Lada Granta
It must be taken into account that the FirmWare folder and the files that are in it should be located in the root of the SD card. After the files needed for the firmware have been written, the card should be removed from the computer. You need to remove the card from the computer correctly, through a special safe removal menu. If this is not done, the card may fail.

You need to connect the SD card via USB to the multimedia system. Then you need to enable MMS. After the software starts, reboot the Lada Grant's head unit by pressing the volume key.

There are four steps that the reboot program must complete. After the MMC turns on in normal mode, an alternative menu will appear on the radio screen.

This completes the preparatory process for the firmware. If everything went as it should, a new WinCE desktop will appear. Now all that remains is to configure the new software that you installed on the Lada Grant's head unit. This is done by clicking the Start button, after which you need to go to the StartSettingControl Panel.

Sometimes there is a slight freeze when opening the control panel. You can get rid of this by performing a forced reboot of the multimedia system. Once the panel opens, click on the Stylus/Calibration icon - this will allow you to calibrate the screen sensor. For the most accurate calibration, you should use a stylus. If everything is in order, a timer will appear. You don't have to wait until the countdown ends; you can tap on the screen.

Now you need to do a forced reboot. You must press and hold the volume key for at least 10 seconds. One point to take into account: the flash drive with the software must be connected to the multimedia system.

It should be noted that during the reboot, the ATH-08 GPS USB DNS splitter with the Globalsat BU-353S4 receiver must be active. In order to turn on the standard menu, press the “standard” key. In order to be able to customize the menus needed to configure the radio, audio, and video, you will need to install the configuration module. This is done manually.

You need to open the soft/radio folder.
And then run start.exe.

This will allow the system to recognize the files that are installed on it. Installing these extensions will allow you to achieve stable operation of the multimedia system, as well as complete the equalizer settings while you listen to the radio.

How is GPS configured after flashing MMC Lada Granta firmware? In order to set up GPS, you need to take a few simple steps. This is necessary so that the Globalsat BU-353S4 module can fully perform its functions.

You need to use the “Tools” item.
Go to the screen keyboard menu.
The module must be connected.
Specify the path staticstoredll2usb.dll.
After this, information about searching for a driver will appear, then you need to click “OK”.
You need to press it until the menu disappears from the display.

After the work has been done, you can fully enjoy the capabilities of the Lada Granta multimedia system.

voice

Article rating

How to update the radio firmware to ver.38 (23.0.2.38)

Archive password: club-lada.rf

Features of assembly with altmenu:

The build is based on version 23.02.38.
Has built-in Russian localization.
Launching the altmenu without rebooting from the standard menu (by long pressing “Settings”).
Built-in driver for GPS receiver BU-353s4.
Initialize sound and time without the participation of the MMC.exe process.
Display of engine temperature and remaining fuel (provided the CAN bus is entered into the MMC).
Screen and sound settings.
There is a radio.
Support for radio buttons.

Firmware: Unpack the contents of the archive to the root of the SD card:

Next we proceed as described above.
This assembly can work without an SD card, or you can delete the Install and Firmware_v38 folders. The Navigation folder must be present on SD or USB, it was created for navigation programs, for example, for Navitel you need to put Navitel in this folder. Now all that remains is to install the navigation program, configure the GPS and GSM modem. In the comments, share your reviews of the firmware and links to them. By the way, do you know how to play most video formats on the standard radio?

Setting up GPS on a firmware MMS Lada Granta

Review of the Lada Vesta car dashboard

Setting up GPS is quite simple and is done only after connecting the Globalsat BU-353S4 GPS module. The setup itself requires the following steps:

1. Go to the “Tools” menu;

2. Calling the on-screen keyboard;

3. Connecting the module itself;

4. You must enter the following path: staticstoredll232usb.dll

5. After the driver search request is displayed on the screen, you must continuously press the “OK” key. Press it until the request disappears from the screen.

If all five GPS settings are completed without errors, then you need to go directly to setting up the navigation software. Directly in the navigation program you need to select the COM5 port and the port speed of 4800bps.

After carrying out such manipulations, everything should work

Please note that Navitel from the archive is already configured

As a conclusion, we must pay tribute to the developers of this firmware, namely the guys from the grant club, who, in turn, developed the interface and additional software to improve the comfort and meet the needs of Lada Granta owners.

User

City	Nizhny Novgorod
Name	Sergey

Posts: 195 On the forum since: 01/19/14

ALL OPERATIONS FOR REFLASHING THE MMS ARE CARRIED OUT AT YOUR OWN RISK ONLY AND WITH LOSS OF THE MANUFACTURER'S WARRANTY OBLIGATIONS FOR THE MMS.

Attention: before flashing MMS, check the software version on your devices, or consult the forum about this, do not rush to kill your device. You CANNOT flash if you have software 02.23.27 or 21.1.2.39 already have several “half-dead” MMS after the firmware

Another very important note: If your stock firmware is 23.0.2.32, and you want to install the stock firmware with Russian locale version 38, then be sure to first flash the stock firmware version 35, and then 38. These are personal observations - NOT FOR 32 firmware Firmware 38 is installed, the device freezes after a reboot on the LADA icon

Setting up MMS Lada for rear view camera

Standard MMC does not require additional firmware for the reverse camera. It is enough to activate this function using a special CAM on/off .

1) We write the program to a flash drive using a computer and connect it to the MMC; 2) On the radio screen, hold down the “Settings” button, then click “Exit” and “Desktop”. After this you are taken to the desktop of the WinCE operating system; 3) Go to the “My Device” folder, then “USB disk” and go to the folder with the program; 4) Launch the CamOnOff program file, allow the camera to be used by clicking on the corresponding button; 5) Close the program and desktop;

Direct firmware mms 2190 grant

Firmware for mms grant 2190: instructions with step-by-step description

The firmware process is quite simple! All you need is an SD card

Note! The SD card must be formatted in FAT16. A common problem after flashing the firmware is the Lada logo freezing on the monitor of the standard multimedia system

This problem may occur as a result of:

• Failure to comply with the parameters of the required formatting system; • Old SD card model, different from SDHC.

If a problem of this kind arises, then it is necessary to check compliance with the above two points of the procedure for flashing multimedia firmware on the Lada Granta.

After the flash drive is formatted and the new software has been decided, for example, NewMenu V7.391Nitro, you need to download the new firmware NewMenu V7.391Nitro and unpack it directly onto the SD card itself.

As for the FirmWare folder, the files located in it must be moved to the root of the SD card. The root of the SD card implies placement of files in addition to other moved folders.

The copying process is complete, which means it’s time to remove the flash drive from the computer. It is worth noting the need for mandatory safe removal, which has long been known to all PC users.

An SD card with files placed on it must be inserted into the mms. After the removable media is inserted into the mms, it must be turned on. After waiting for the device to fully boot, long pressing the volume key will reboot it.

The reboot takes place in four stages, which is shown in the example of four boot lines, upon completion of which, MMS will start in normal mode (standard display menu). Just a few seconds after the standard menu, the radio will go to the altmenu.

Note! If any device is connected to the USB radio, the altmenu will not start. After removing the device, the radio must be rebooted again

The advantage of using the ATH-08 DNS USB splitter, which was mentioned at the beginning of the article, is multi-polarity. A GPS receiver and other USB devices connected to the hub will not interfere with the launch of the altmenu, but will become inactive.

Video instructions for flashing firmware for Lada head unit

If after the firmware the radio does not boot, but freezes on the “LADA” logo :

Make sure nothing is inserted into the USB port.
Create an empty Explorer.txt file in the USB root. After rebooting, the WinCE desktop should load.
Try turning off the power to the MMC (remove the battery terminal) for 5 minutes.
Try formatting the SD card to a different file system (FAT32/exFAT/FAT) and reflash the radio again.
Use another SD card to flash the radio firmware.

Let us remind you that we solve other problems of MMS related to its operation in this article.

The MMS Grant firmware makes it possible not only to expand the functionality of the system itself, but also the ability to connect a rear view camera to the standard multimedia.

It is worth noting that the presence of a standard or normative standard multimedia system pre-installed by the manufacturer is not suitable for performing a number of actions that will be described below. The exclusively multimedia system in the luxury configuration is suitable for firmware.

The process of flashing the multimedia system requires the presence of a GPS receiver, namely the Globalsat BU-353S4 model, as well as a Huawei E1750 3G modem from Megafon. These devices, paired with new software, will allow you to use the navigation that VAZ engineers promised, and will also delight you with the presence of the Internet in the car. All these products can be bought on eBay, and cheaper than in other stores.

Nuances of multimedia firmware Grants (2190)

It is quite easy to carry out the firmware itself when installing the mms 2190 firmware. To do this, it will be necessary to use an SD card.

Among the common flaws that occur after the dashboard firmware is installed, even if it is the latest version, is the Lada logo freezing on the display of the head unit.

This moment can be provoked by the following factors:

failure to comply with required formatting principles;
the presence of an outdated version of the SD card that differs from “SDHC”.

After successfully formatting the card and selecting software (for example, “New Menu V7.391 Nitro”), you will need to acquire the latest firmware and unpack the product onto a previously prepared SD media.

Regarding the “Firm Ware” folder, note: the files located in it will need to be redirected to the root directory of the card itself. Upon completion of the copying process, disconnect the flash card from the PC, not forgetting about the safe removal technique.

Now we confidently insert the SD card with the prepared files present on it directly into the MMC. Then turn on the head unit. We wait for the full download to complete and by long pressing the volume button, we reboot.

The act of rebooting is characterized by four stages, the display of which is implemented in 4 lines of process status. After filling out these lines, the device starts in the usual mode, as evidenced by the appearance of the corresponding original menu. After a few seconds, the device transitions to the altmenu.

The USB splitter “DNS ATH-08” has acquired a significant advantage – multi-polarity. The GPS receiver and other USB modules connected to the “head” are combined with the altmenu, but become inactive.

After the MMS 2190 firmware is completed on a Lada Granta car, its display displays a new type of desktop, namely “Wince”. The 4 files previously mentioned and copied into the depths of the root directory of the map are “responsible” for the presence of the interface on the desktop.

The subsequent manipulation is associated with the need to configure new software in the standard multimedia device of the Lada Granta car. For these purposes, click the “Start” button, after which we follow the following route: “Start\Setting\Control Panel”. Sometimes owners complain about the slowness of the “Control Panel” opening process, but this phenomenon disappears after rebooting the MMC in forced mode.

When the control panel is open, in its interface click on the “Stylus/Calibration” symbol. With this action, the user of the new software gets the opportunity to calibrate the touch screen for response accuracy.

Upon completion of the simple calibration procedure, a timer appears; you should not wait for the completion of the counting process. Feel free to click on the screen.

Now the long-awaited time has come for the forced reboot process. Long and holding pressure on the volume key (10 seconds or more) allows you to implement this process in MMC. At this moment, the removable media, which contains the new software, continues to reside in the connector of the head unit of the Lada Granta car.

Having completed the reboot action, the device will first display the standard menu, and then, similar to the preparation procedure, the altmenu. If you need to return to the “native” menu, you should hold down the “Native” key.

The process of rebooting the device, after the dashboard firmware has been flashed, requires its connection via a USB splitter of the specified model with the Globalsat BU-353S4 GPS wave receiver. If there is none, then upon completion of the process itself the “head” will display the normal menu mode on the display.

Such common settings as sound, as well as audio or video, are present in any multimedia device in the domestic Lada Granta car.

“NewMenu V7.391Nitro” needs a manual way to install the indicated options, which will require:

log in to the “soft/radio” folder;
resort to activating the “start.exe” file.

The procedure will agree to associate present files with the extensions “exe” and “ahk”. This manipulation is quite important and allows you to achieve stable functionality of the MMC, which is used to flash the dashboard firmware.

Single menu mms 2190 latest version

Firmware MMS 2190 for the multimedia system in the balanced LADA Granta model allows you to significantly expand the functional potential of the built-in device.
Note that the standard version of the multimedia complex, present in the LADA Granta car in the “Standard” and “Norma” versions, does not allow you to perform the list of actions given in this material. To successfully update the dashboard firmware, only the head unit, which is equipped with the Lada Granta in the “Lux” version, is suitable.

For domestic cars, the navigation option and the Internet are incompatible phenomena, since to ensure their full functioning, you will need to use a USB signal splitting device “DNS ATH-08”.

Easy link mms 2190

Description:

Alternative menu (shell) for MMC cars Lada Granta, Kalina, Priora. In NewMenu 9, all functionality is divided into separate applications. The main applications - radio, video player, audio player, BT player, AUX, phone and navigation - are located on the main menu screen. The remaining additional functions of MMC are divided into corresponding applications. For example, application options: Trip computer, Car (displaying a car with doors, indicators, etc.), Climate (for displaying climate status), Motor (for reading and decoding errors, controlling fans), an application for measuring dynamics, an application for street racers (red flash), etc.. You can come up with many applications. Applications can be uninstalled and installed through the Application Manager. Those. You can create your own MMS functionality. Installed applications are displayed and launched in the Applications window. Some applications can be launched as a screensaver (Trip Computer application). Applications can be launched either by a hot button (the Trip Computer is launched by clicking on the Fuel icon in the Kan-panel) or by an event (for example, when check the Motor application is launched).

Possibilities:

Listening to radio, audio files; watching videos.
Connection with phone via Bluetooth protocol; Speakerphone; the ability to receive and make calls; phone book with quick contact search; listening to music from your phone via Bluetooth (via BTPlayer).
Launch a navigation program, simultaneous use with all audio applications.
Playing navigation prompts when listening to the radio, AUX, music from the phone, during a telephone conversation on the front or rear speakers (mixing).
AUX input support (hardware modification required).
Sound settings (balance, equalizer, advanced hardware equalizer settings); screen settings, automatic day/night mode switching; turning on the parking camera.
Setting up sound alerts, mixing direction and volume, and the ability to immediately do a mixing test.
Kan-panel with vehicle data readings, voice prompts about the vehicle’s condition.
Automatic volume adjustment depending on the current speed (auto volume).
Support for navigation programs, support for USB GPS receivers, support for standard GPS receiver.
Trip computer application: display of trip data (speed, revolutions, gear, mileage, time, consumption, cost, remaining range, etc.), recording trip data in the log, log viewer with data grouping, adjusting the accuracy of mileage and fuel level in the tank, and etc.
Motor application: reading, displaying, decoding engine errors, resetting ABS automatic transmission SRS errors, manual and automatic control of engine fans, idle speed control when the car is stationary.
Other applications: file manager, text viewers, calculator, browser and many others.
Switch between all running applications using the Mode (Menu) button.
Ability to change the design style, preview the changes made.
All main menu settings in one window with tabs.
Saving all user settings (including design) when switching to a new version.
Steering column switch support.

Installation, update, removal, disaster recovery:

Installation

1. Unpack the archive into the root of a USB flash drive or SD card (Install folder). 2. Exit to the MMS desktop. Run the file InstallInstall.exe (white label) from a USB flash drive (SD card). When installing on a clean MMC, there will be a reboot, then the installation will continue. 3. To install the MMC to the internal memory, click Install. To install to an SD card, click Cancel, then click Install. 4. Select drivers for the USB devices you are using and click Install. If there is nothing, click Cancel. 5. Select the MMC type. 2190 – MMS standard installed on Granta, 2192 – MMS standard installed on Kalina/Priora. For MMC with standard navigation, select the type with navigation.

Standard multimedia MMC 2190 Lada and Lada NewMenu

How to ask a question correctly:

1. Indicate the make of the car, equipment, year of manufacture. 2. Indicate the software of your MMS (information from info), whether the software was flashed, and if flashed, then with what firmware - write the full number and name. Show in full... 3. If the CAN controller was flashed, what version was it flashed with? 4. If an alternative menu is installed, write which one: Singlemenu or Newmenu, version and what skin is used. 5. Briefly state the essence of the problem (if possible, attach screenshots) and what actions were taken.

Before - use the search on the wall, most likely, your problem has already been considered before. Actions of the administration are not discussed = ban.

The firmware is a build of Windows CE with built-in add-ons and a standard shell. The firmware consists of 4 files: Chain.bin – firmware header file, there are no files there, only offsets needed by the bootloader. chain.lst – a list of firmware files, needed for the bootloader so that it knows what to flash. NK.bin – archive of main files. TINYNK.bin is a very important file, it contains firewood for the flash memory of the SD card, the registry and the main files needed to start the box even before Windows boots. Firmware for MMC Grants and Kalinas/Priors - NOT COMPATIBLE`. For Granta – 21,*,*,** For Kalina/Priora – 23,*,*,** MMC firmware and FAQ – https://4pda.ru/forum/index.php?showtopic=715138&v..

The altmenu is an alternative finger-oriented shell for displaying the necessary data, controlling devices (switching and adjusting sound, Bluetooth, etc.) and launching applications. This includes: SingleMenu – https://4pda.ru/forum/index.php?showtopic=721507 NewMenu – https://4pda.ru/forum/index.php?showtopic=715138&s.. also here SM and NM – https://vk.com/topic-69519788_34655735

MMC design Skin builders have developed various styles for the Altmenu - (different graphic design of the menu with a different set of functionality) MMC design - https://4pda.ru/forum/index.php?showtopic=715138&s..

SinglePlayer is a powerful audio player for consoles running WINCE 6.0. Made for an alternative shell SingleMenu and NewMenu SinglePlayer – https://4pda.ru/forum/index.php?showtopic=724655

CAN bus CAN (Controller Area Network) – provides connection to any devices that can simultaneously receive and transmit digital information. On the MMC it is needed to read and erase ECU errors. CAN bus firmware – https://vk.com/topic-69519788_32222656

We kindly ask you to ask all your questions in this thread, and not in PM, because... many points have to be explained to different people several times. Otherwise, someone with the same question will have a ready answer and write the car model at the beginning of the message, because... sometimes it is necessary. You can use the search by records, most likely your issue is resolved: https://vk.com/wall-69519788?search=1

You may be denied entry into the group without explanation. Persons under 18 years of age are not accepted into the group.

How to install 2 din in grant norm or standard

Everything is more complicated here. Need to:

dismantle the center console trim - unclip the fastenings, move it forward and disconnect the buttons and heater handles;
cut out a vertical plastic partition that will not allow you to install a 2 din device;
file the plastic casing of the central air duct;
try on a new acoustic unit, adjust the fastenings if necessary;
install adapters from the delivery kit on the wiring (if required);
install the device;
if we leave the old center console trim: we cut out the partition, try it on, put it in place with the buttons and handles connected, adjust the decorative frame of the control unit, install it;
if we install a new trim on the console under a 2 din device: we transfer the heater control unit and buttons from the old trim, install them in place, and put a decorative frame on the control unit.

Granta deluxe head unit. Device functionality

Lada Granta Lux is a modern car of the domestic automobile industry, equipped with a multimedia system that is not inferior in quality to its imported counterparts. The MMC Lada Granta Lux is controlled by a Windows-based OS. In addition to the usual standard functionality for such equipment, MMC Grants have an additional number of options. Such as connecting rear view cameras, navigation system, viewing photos and videos from a flash card, and so on. But on one condition. Additional improvements to the OS. Simply put, in order to use the system to its fullest, you will need to update the firmware of the 2015 Lada Granta Lux standard radio.

Firmware for radio Kalina 2 Lux

Despite all its advantages, Kalina's MMC car also has some disadvantages. However, getting rid of them is not very difficult. You can fix and improve the quality of standard equipment and additionally connected devices (navigation, rear view cameras, etc.) by flashing the OS.

Firmware for radio Lada Kalina 2.

To do this, you will need a five (5) GB SD card edited in FAT. In the future, if necessary, the exFAT format can be used. The sequence of operations performed is as follows:

Copy the desired firmware version to the flash card. The average size of a version is about four Gigabytes in FAT.
Transfer the files from the “FirmWare” folder to the root folder of the SD card.
Remove the flash drive from the USB.
We install it (SD card) into the USB connector of the car player.
Reboot the GU by long pressing (at least 15 seconds) the power button. As a result, a reinstallation will occur and the MMS will automatically install itself into the desktop menu mode.
Without turning off the player, we adjust the screen (by pressing the “Recalibrate” sensor). At the end of the countdown, click on the display.
We reboot the radio again, but with the flash card inserted. As a result, the updated menu is loaded.

The manufacturer of Kalina installs one of two versions of the operating system on the car radio. 32nd or 35th. You can change them to the hybrid version 38 by registering and downloading this firmware version for free on the website 4pda, widely known among car enthusiasts.

In general world practice, manufacturers, as new operating system updates appear, publish information about them on their official websites.

Unfortunately, AvtoVAZ does not provide such care for the owners of its cars and equipment. Which, in principle, does not cause any surprise among our users of this car brand. In conclusion, video instructions on how to download the radio firmware for Kalina 2.

Conclusion

The latest version of the firmware we reviewed turned out to be quite convenient. It is impossible not to note from a positive perspective its developers - participants in the Grant Club. Having a convenient interface in MMS, you can comfortably spend time behind the wheel of LADA Granta.

The MMS Grant firmware makes it possible not only to expand the functionality of the system itself, but also the ability to connect a rear view camera to the standard multimedia.

How to set up "GPS" on the firmware version of the multimedia?

Carrying out this action will not take much effort. The procedure involves preliminary switching with the GPS module and consists of the following algorithm of actions:

go to the corresponding “Tools” menu;
activating the display keyboard;
direct module switching;
route instructions: “\staticstore\dll\232usb.dll”;
continuously pressing the “OK” key after the prompt regarding driver selection is displayed on the screen.

If the indicated steps are completed correctly, then we proceed to the manipulations of setting up the navigation software. In the program, we select the “COM 5” port and the corresponding speed – 4800 bps.

Upon completion of the entire list of manipulations, we observe the operation of the system

Please pay attention to the presence of the configured Navitel program

Firmware types

Due to the fact that the electronic filling or “brains” of car tape recorders are different depending on the manufacturer, both car and audio equipment, the firmware is created for each device separately. There are usually two types of firmware

An operating system released by the official manufacturer of the device itself. In some cases, they can be downloaded for free from the website of the issuing company.

Homemade OS. In other versions, the name is “custom” or “alternative”. Basically, this is a standard OS, modified by independent developers - computer scientists.

Work order

The process itself is very simple. To use such a card, you must first format it in FAT16. During the flashing procedure, the Lada logo may freeze, this happens for the following reasons:

Outdated map;
The card was formatted in the wrong system as required.

Therefore, the procedure is simple, but it must be treated very carefully. You can download the new firmware on the official Lada website.

We connect the card to the multimedia system. Then we turn on the standard system itself. We wait for the system to start and then reboot the radio by pressing the volume key.

The program must go through four stages. Once enabled, you will see an alternative menu. This ends the preparatory stage. If everything is correct, you will see working Windows. Then all that remains is to install the software. Go to the folders Start – Setting – Control Panel.

If you experience freezing when moving from folder to folder, then simply reboot the system. Going to the panel, open the Stylus – Calibration icon. This menu will help you calibrate your screen.

Next, reboot the system again, press the volume key and hold for about ten seconds.

After turning it on again, open the Soft – radio folder and run the installation file.

These actions will help the system recognize files and stabilize the operation of your media system, as well as adjust the equalizer when you listen to the radio.

Then we set up a navigator if you need one. Go to the tools, connect the module, specify the path Staticstore\dll2usb.dll. After finishing the search, press OK, and continue to press until the menu disappears from the display.

Completion

All. You have flashed your multimedia system, and now it will work stably and efficiently. You can also return your standard operating system.

When installing a new operating system, you should use NewMenu V7.391 Nitro to work with the navigator. Today this is the newest and highest quality system for use in Lada Granta multimedia systems.

That's actually the whole process of preparing for the firmware!

After the firmware on the MMS Lada Granta is completed, a new desktop will appear, and in particular the Wince desktop. It is those four files that were copied separately to the root directory of the SD card that are responsible for displaying the interface of this desktop.

The next step is to configure the new software on the standard multimedia Lada Granta. To do this, you need to click the Start button, and then proceed based on this path: StartSettingControl Panel.

In some cases, at this stage, delays were noticed in opening the control panel, which disappeared after a forced reboot of the mms.

In the panel that opens, click on the Stylus/Calibration icon. Thus, the user of the new software is given the opportunity to calibrate the response accuracy of the touch display.

Where can I get firmware for the Lada Priora radio and other car models?

Today it can be obtained from a technical service center, as well as downloaded on the Internet on various sites for a fee or free of charge. Be sure to check the reliability of the source, because... Many installation files in the form of archives can be compiled manually by specialists whose skill level cannot be trusted.

It is better to search on trusted forums and websites, where various firmware versions are given in lists along with instructions and descriptions of the process, as well as recommendations and tips. Be sure to study the contents of the archives, and also check the downloaded files for viruses.

Firmware ledokol m74 semi-latest versions

Commercial Ledokol firmware for M74 units version 8.2.

Granta - Datsun SportI464SG04_L_E0_v8.2.rarI464SG04_L_E2_v8.2.rarI464SG04_immo_v8.2.rar

Granta - Datsun ATI465AGK4_L_E0_v8.2.rarI465AGK4_L_E2_v8.2.rar

Granta - Datsun MTI444GT12_L_E0_v8.2.rarI444GT12_L_E2_v8.2.rar

I445GBK2_L_E0_v8.2.rarI445GBK2_L_E2_v8.2.rar

I455GCT3_L_E0_v8.2.rarI455GCT3_L_E2_v8.2.rar

I475GBK5_L_E0_v8.2.rarI475GBK5_L_E2_v8.2.rar

I484GK08_L_E0_v8.2.rarI484GK08_L_E2_v8.2.rar

I484GP12_L_E0_v8.2.rarI484GP12_L_E2_v8.2.rar

I484GU17_L_E0_v8.2.rarI484GU17_L_E2_v8.2.rar

I475GBK4_L_E0_v8.2.rarI475GBK4_L_E2_v8.2.rar

All the above files of the M74 kit version 8.2 in one archiveThe whole kit: Ledokol_M74_v8.2.rar

Versions LR or E2 - emission standards Euro 2Versions LX or E0 - emission standards Euro 0

Dynamic and optimized versions of firmware for chip tuning, new software was made, errors were fixed. All the latest in terms of factory software were added. Previous errors have been corrected..

MMS revision process

We remove the radio and unscrew the cover, turning the screws out into view. Next, we take out the audio system board and find on it the amplifier chip (circled in red) and the amplifier power capacitor (circled in yellow), which is located nearby.

1. Solder the microcircuit by first removing the metal casing and bending the lower ears. It is more convenient to do this using a hair dryer (25 legs in total, which are soldered with lead-free, refractory solder). Next, we clean the holes in the board and solder the purchased microcircuit and install the metal casing. Apply thermal paste.

2. Solder the capacitor (don’t forget that it is polar). We install the new one in a lying position, because its dimensions are much larger than the standard one. We solder a film capacitor on the back of the board.

Additionally: We change preamplifiers in a similar way.

As a result, the radio/MMC has a huge power reserve. Now you can listen to music at higher volume levels with virtually no distortion. In addition, the sound became cleaner.

Let us remind you that there is an easier way to improve the sound quality of music, for example, install an amplifier or flash MMC with a different version of the menu and equalizer.

Photo: sokkol78 and Rivo in-flight magazine

Keywords: cassette player Lada Vesta | cassette player Lada Granta | cassette player Lada Kalina | cassette player Lada Priora

0 0 0 0 0 0

Share on social networks:

Review of the standard radio (MMC) of Lada Granta, Kalina 2 and Priora (luxury)

Currently, depending on the vehicle configuration, several types of 2 din radio can be installed.

The first is called “2 DIN audio system, without CD drive, without TouchScreen”, the other “multimedia system without CD drive, with a 7-inch display with TouchScreen” (MMC).

In the review we will talk about the MMC with a touch screen (LCD display), which is installed on the Granta (sedan and liftback), as well as on the Lada Kalina 2 and Lada Priora.

Catalog numbers MMS Lada:

Monoblock 2190-7900010-00 - MMC Lada Granta (luxury) and Lada Kalina 2 (standard) The screen is separated from the buttons 2192-7900200 - MMC Lada Kalina 2 (luxury) and Lada Priora (luxury)

MMC runs on the Windows CE 6 operating system. This is specially optimized for devices with a minimum amount of memory, by the way, in our case the memory is only 128MB. Despite this, turning on the radio does not take much time (about 2-3 seconds).

MMS screen

The display on the Granta and Kalina radio is resistive. Unlike a capacitive screen, it is able to work without failures in more severe conditions, for example, frost or heat. The display itself is quite bright and pressure sensitive. Due to the lack of a visor, there is glare in sunny weather, but not critical.

radio cassette player lada granta lux radio cassette player lada kalina 2 lux

Disadvantages and problems of the audio system in the Lada Granta

1. As you can see in the list of characteristics, the radio does not support reading compact discs; there is not even a connector for this case. This cannot be said to be a huge oversight, but this decision may still cause some inconvenience.

2. The Bluetooth function works quite slowly, and when transferring a large amount of information it may freeze completely.

3. Connoisseurs of pure sound in cars note the discrepancy between the output sound power of the radio and the 13-inch speakers provided for this. For the best sound effect, it is often necessary to replace speakers that simply do not perform well.

4. Poor video quality during playback, especially difficulties with the AVI 720 format.

5. Despite the built-in video input, connecting a rear view camera is impossible. However, this problem was successfully resolved in the firmware for the radio.

How to eliminate some shortcomings of the multimedia system

Sometimes, in order to start using new media, you need to purchase it. She will certainly be able to cope with tasks that are standard. But you can’t expect more from it without additional modifications. Without this, you will not be able to configure the navigator or connect a rear view camera.

It must be said that many multimedia that modern foreign cars are equipped with are significantly inferior in their capabilities to the MMC Grant. This system is unique and quite competitive. If there are minor problems in the operation of the MMC, then updating the MMC firmware will eliminate them. Let's look at how to make firmware for 2014.