Where is the cabin number for gas 3302?
GAZelle 3302
The year of manufacture affects the location of the GAZelle cabin number
: right door pillar (plate);
Interesting materials:
How to flash a tablet? How to do a flashing? How to recalculate an old-age pension? How to recalculate utility bills? How to make a transfer from a Rosselkhozbank card to Sberbank? How to translate a website on an iPhone? How to translate a screenshot? How to make overcooked meat tender? How to make the first page without a number? How to make the first two pages without numbering?
AUTOFIZIK.RU / auto repair
Placement of seats in passenger and cargo-passenger modifications
Vehicles of the Gazelle family - cargo, cargo-passenger and passenger (buses), two-axle with twin wheels of the rear axle, frame construction, with a half-hood cab. The engine is located longitudinally in the front of the cabin. The drive is carried out on the rear or (in the 4x4 version) on all wheels of the vehicle.*
Cars GAZ-3302, GAZ-33021 type 4x2 and GAZ-33027 (4x4) have a three-seater cabin and a flatbed body.
GAZ-33023 (4x2) and GAZ-330273 (4x4) have a six-seater cab and a shortened side body. The GAZ-2705 (4x2) and GAZ-27057 (4x4) cars have an all-metal closed body with a three- or seven-seat cabin.
Buses on the chassis of Gazelle cars have from 8 to 13 passenger seats, depending on the modification.
* 4x4 vehicles are not considered in the book.
Dimensions of cars
Vehicle data sheets
The UMZ-4215 engine identification number is stamped on the left side of the cylinder block.
The identification number of the ZMZ-406 and ZMZ-402 engines is stamped on the left side of the block (bottom).
The nameplate is mounted on a post in the front passenger door opening.
The vehicle identification number is stamped into the top of the sliding door opening. On buses, this number is additionally located above the rear right door. For vehicles with a flatbed body, this number is located above the battery.
The body identification number is stamped on the front panel above the brake booster.
EXAMPLE OF A NAME PLATE:
ХТН270500Y0227979 – Vehicle identification number, where:
ХТН – international manufacturer code; 270500 – car model; Y – year of manufacture code (Y – 2000; 1–2001; 2–2002, etc.); 0227979 – vehicle serial number; 0242 – vehicle equipment; 421500 – engine index.
The chassis identification number is stamped on the outside of the right frame side member in the middle section.
Downloading a book
After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:
On this page you need to indicate your e-mail, where access to download the book will be sent.
If you are already registered on our website, then simply follow the link to your personal account.
The book you purchased will be in your personal account, from where you can always download it.
Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.
If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.
Engine repair
Maintenance of the Kamins internal combustion engine for Kamaz is carried out by analogy with the model 740 and its modifications. Although, according to the manufacturer's manual, maintenance should be done every 20,000 km, regardless of the condition of the parts. So, during maintenance it is necessary to perform the following series of operations:
- Changing the engine oil. At the same time, it is recommended to pour only high-quality American oil, which is indicated in the engine service book.
- Changing oil filters. Some engines are equipped with two engine oil filters: coarse and fine.
- Replacement of fuel filter elements: coarse and fine cleaning.
- Changing the air filter.
- As well as a number of diagnostic operations: diagnostics of the fuel system, measuring the compression of the power unit, checking the valve mechanism and others.
It is recommended to carry out repairs of engine components at a service station. But, often motorists think that we can repair it ourselves.
If you are guided by the technical documentation of the manufacturer, then all power units have a complex structure and their repair requires certain service equipment.
As for major repairs, they are performed extremely rarely, since the engine has a service life of 1,000,000 km. According to the technical documentation of the manufacturer, the motors are considered unrepairable, but in the CIS, such a concept does not exist and Cummins motors are still being repaired.
That is why spare parts such as pistons, crankshafts and valves are produced and supplied especially for the CIS countries. Of course, many spare parts have analogues that can be easily purchased on the automotive markets.
On-line repair of the Cummins KAMAZ engine can be carried out independently, since the engine has a simple and understandable design, which is why domestic motorists love it. But the repair of such elements as the fuel and oil pump is not something to joke about, since incorrectly set gaps can cause a lot of problems.
What to do if the number is erased
A few owners of GAZelles of early production covered the sign with anti-corrosion paint, protecting the marking. Utility vehicles are actively used, the sign is erased, and questions about its presence arise unexpectedly during various procedures at the traffic police. What to do if the factory frame markings are not readable? There are several options for the development of events.
Try to explain to the traffic police officer that the frame in GAZelles 2507 and 3302 is not a numbered part. Model 2507 has a numbered body and cab, while GAZ 3302 has a body. The frame number indicated in the passport is most likely a marking of one of these parts. If the problem is understood, the car will be inspected “after the fact”: the engine markings, cabin number and plate on the body will be checked. If all the data matches, the car will be registered, and a non-numbered (no number) mark will be placed in the “frame” column.
The option is the same, but you will have to write a statement to the traffic police and indicate that the data entered in the “frame” column is incorrect and unreasonable. In the future, after receiving a visa from the authorities, the car will be inspected “after the fact” and all changes to the vehicle’s markings will be entered in the “documents” column.
If the situation develops unfavorably for you, the traffic police may order an examination of the car, and based on the expert’s refusal, the car will be registered or re-registered to another owner.
The absence of a sign can greatly fray your nerves during the re-registration procedure and seriously delay it. The issue of GAZelle registration will be resolved in any case, either quickly (through an inspection “after the fact”), or slowly (through an examination). The main thing is to remain calm, communicate adequately with traffic police inspectors and, together with them, look for ways to solve a difficult situation.
GAZ Gazelle Next…. Top Line. … › Logbook › ๑۩๑► Decoding of GAZelle markings. ◄๑۩๑
Good day, fellow gazellists. From many I heard conversations like: “Ha, but how do the guys or technical supervision know how long a car is or what should be in it and what not... Whatever I want, I turn it around...” And the other day I was thinking about the digital values of our gas cars and so what I discovered. It turns out that the employees just need to look at the numbers and everything will become clear to him, WHAT LENGTH (answer to those who lengthen cars), what equipment, WHAT ENGINE SHOULD BE FIT (answer to those who like to swap), what kind of body, all-metal, bus, refrigerator, manufactured goods, isotremic, etc. d. If anyone has any contradictions, any information, additions, I would be grateful.
Well, REPOST friends of this topic.
Flatbed vehicles With single-row cab Standard base:
GAZ-A21R22-30 (Cummins diesel E-4) GAZ-A21R23-20 (UMZ Evotech E-4) GAZ-A21R25-20 (GBO UMZ Evotech E-5)
GAZ-A21R32-30 (Cummins diesel E-4) GAZ-A21R33-10 (UMZ Evotech E-4) GAZ-A21R35-10 (UMP Evotech E-5 LPG)
Double Cab Standard Base:
GAZ-A22R22-30 (Cummins diesel E-4) GAZ-A22R23-10 (UMZ Evotech E-4) Extended wheelbase:
GAZ-A22R32-30 (Cummins diesel E-4) GAZ-A22R33-20 (UMZ Evotech E-4) All-metal vans With single-row cab Standard base:
GAZ-A31R22-40 (Cummins diesel E-4) GAZ-A31R23-20 (UMZ Evotech E-4) Extended wheelbase:
GAZ-A31R32-40 (Cummins diesel E-4) GAZ-A31R33-20 (UMZ Evotech E-4) With double-row cab Standard base:
GAZ-A32R22-40 (Cummins diesel E-4) GAZ-A32R23-20 (UMZ Evotech E-4) Extended wheelbase:
GAZ-A32R32-40 (Cummins diesel E-4) GAZ-A32R33-20 (UMZ Evotech E-4) Isothermal vans Standard base:
А23R22-0011-26-597-60-00-900 (Cummins diesel E-4) А23R23-0011-26-597-60-00-900 (UMZ Evotech E-4) Extended base:
А23R33-0011-26-597-60-00-900 (UMZ Evotech E-4) Manufactured goods Standard base:
А23R23-0011-18-641-60-00-900 (UMZ Evotech E-4) Extended base:
А23R33-0011-18-641-60-00-900 (UMZ Evotech E-4) Europlatforms Standard base:
А21R23-0011-96-624-60-00-900 (UMZ Evotech E-4) А21R23-0011-96-625-60-00-900 (UMZ Evotech E-4, increased van dimensions) Extended base:
Passport details
Vehicle registration data includes vehicle identification numbers (VV) and cab or all-metal body, engine and chassis identification numbers.
The vehicle identification number (VIN) is printed on cars with an all-metal body on the outer front panel under the hood on the right side in the direction of travel of the car (see Fig. 1.1, view along arrow “A”).
Rice. 1.1. A - place of application of VIN of cars; B - place where the identification number of the cabin or body is applied (vehicles with all-metal bodies)
The vehicle identification number (VIN) on vehicles with a platform is placed on the right frame side member in front of the front rear spring bracket (Fig. 1.2).
Rice. 1.2. Place of application of the VIN of vehicles with a platform and the chassis identification number:
1 — place where the identification number is applied; 2 — front bracket of the rear spring; 3 — right frame spar.
If a second fuel tank is installed, the VIN is located between the spring brackets on the right frame side member.
Example of applying a car VIN:
* X96330200* VO 140794*, where
X96 - international manufacturer identification code,
330200 - car index,
B - model year code (B - 2011, C - 2012),
0140794 - vehicle serial number.
Model year
- a period equal to an average calendar year during which cars with the same design features are produced.
Cab or body identification number
is applied under the hood on the outer front panel on the left side in the direction of travel (see Fig. 1.1, view along arrow “B”).
An example of applying a body (cabin) number:
270500 - body index or
330200 — cabin index;
B - model year code;
0100125 - serial number of the body (cabin).
Chassis identification number
applied only to chassis vehicles intended for delivery to other enterprises for the manufacture of special products. The chassis identification number of onboard vehicles is marked on the right frame side member in front of the front rear spring bracket.
Bus chassis identification number
is applied under the hood on the outer front panel on the right side. Example of applying a chassis number:
330200 — chassis index;
B - model year code;
0102526 — chassis serial number.
Engine identification number
stamped on the cylinder block on the left side.
An example of applying the engine identification number:
4216СР — engine index;
B - year of manufacture code;
0901271 - engine serial number.
The engine configuration option is indicated by an alphanumeric code (the last two digits of the engine index).
Vehicle registration details
are also indicated on the nameplate (Fig. 1.3), located on the rear pillar of the right side of the cab.
Rice. 1.3. An example of a nameplate with nameplate data, where: a is the vehicle type approval number; b — identification number of the vehicle (vehicle); c - maximum permissible total weight of the vehicle; d - maximum permissible total weight of the vehicle with trailer; e — maximum permissible load on the front axle; f — maximum permissible load on the rear axle; g is the engine index.
Next to the nameplate on the car there is a special plate that contains information about international certificates (official approvals) that apply to the entire family (modifications) of cars in this category.
The list of international certificates applicable to your car is given in the service book.
Chassis passport data supplied to other enterprises for the manufacture of special products includes identification numbers of the chassis, cabin and engine. The vehicle identification number is not installed or marked on the chassis.
If you have a Gazelle GAZ-33025 with LPG, then the next step in the instructions is here. Full contents of the instructions for the Gazelle with HBO.
Source: gazavtomir.ru
