How to cover the ceiling on a VAZ 2114 with your own hands


Product delivery options

Note!
Below are the shipping methods available specifically for this product. Depending on the delivery method, possible payment options may vary. Detailed information can be found on the delivery and payment page.

Transport companies

Available payment methods:

  • Using cards Sberbank, VTB, Post Bank, Tinkoff
  • Yandex money
  • QIWI
  • ROBOKASSA

Delivery is possible to any locality where there is a representative office of the transport company. Delivery time is from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.

Courier delivery in Togliatti

Available payment methods:

  • Cash upon receipt
  • Using cards Sberbank, VTB, Post Bank, Tinkoff
  • Yandex money
  • QIWI
  • ROBOKASSA

Delivery time from 1 to 12 hours.

Pickup from our warehouse

Available payment methods:

  • Cash upon receipt
  • Credit
  • Using cards Sberbank, VTB, Post Bank, Tinkoff
  • Yandex money
  • QIWI
  • ROBOKASSA

Pickup times must coincide with store opening hours.

Evgeny Nikulin from the Volgograd region:

After buying the car, a lot was redone, as they say, for the soul and for yourself. And now it’s time for the salon:

  • seats reupholstered;
  • Euro door trim;
  • rugs;
  • interior sound insulation,

But the ceiling remained untouched. No matter how I washed it, no matter how I cleaned it, this dirty white ceiling spoiled the whole look. There weren't many options to transform it:

  1. I didn’t want to tighten it - it was long and tedious;
  2. painting with a spray can - well, that’s not the same at all.

The only option left is to replace it with a finished one in black.

Having visited all the markets, I found nothing and then on the drive I read a positive review from a satisfied owner of this ceiling. After weighing all the pros and cons, it was decided to buy this miracle plus visors in color. Where to order, I took the link from his article. So I left a request and made an order on the website motorring.ru.

Delivered by transport company to the address, everything safe and sound. I started installation right away. Removing the old trim was not difficult. Well, the installation didn't take much time. All the holes fit perfectly, I removed the ring from the fish eye of the lantern from the old one, the visors fit perfectly (by the way, with a mirror, my wife will be satisfied). The ceiling material is pleasant to the touch, not a rag, but black pile like a factory.

The procedure for replacing a car roof by pillars

  • When replacing a roof along the pillars, you need to determine where the joint will be. According to the technology, for better strength, the new roof with the body pillars needs to be butt welded with an offset (ladder). To do this, a spot weld is drilled into the sides of the racks, and the front and inner parts of the racks are cut off. It is necessary that the cuts are at different heights (at least 5–10 cm). If there is reinforcement inside the racks, then it must be cut off and welded also on a different plane than the front and inner parts. To do this, you may need to cut out a segment of the outer part of the rack (“window” measuring 5 cm), which is then welded back.
  • The butt welding method with placing an additional plate inside the rack for reinforcement is also used. With this method it is easier to correctly align the roof in place.
  • It is necessary to correctly mark the new roof and the old one before cutting. To do this, you need to find some marks on the body from which you could measure. It is better to leave a small margin and, trying it on locally, cut the racks to the desired size.

How to cover a car ceiling with your own hands

You can sheathe the ceiling with the material yourself, without resorting to the help of specialists from car repair shops.

To reupholster the ceiling yourself, you will need the following materials and tools:

  • covering fabric;
  • glue;
  • degreaser;
  • Screwdriver Set;
  • hard sponge;
  • fine-grained abrasive;
  • masking tape;
  • rollers for leveling the surface;
  • hairdryer

You may also need new fasteners and caps for decorative elements.

In order to successfully cover the ceiling with new fabric, follow the following sequence of actions.

  1. Remove the car ceiling. To do this, you need to remove all fasteners and hanging elements. The ceiling is dismantled in accordance with the operating instructions for each specific model. In some cases, it may be necessary to remove the windshield or front seat. First turn off all electrical equipment.
  2. Clean the ceiling from the old coating using a hard sponge.
  3. Remove any remaining old glue using a degreaser.
  4. Sand the ceiling with a fine-grained abrasive to remove any unevenness.
  5. Apply a thin bead of glue to the center of the ceiling. The length of the strip should not exceed 10 cm.
  6. Apply the central part of the material to this place and smooth it thoroughly using a roller.
  7. Apply similar strips of glue every 10–15 cm.
  8. The fabric needs to be stretched and smoothed well. At this stage, you may need an assistant to do the job better.
  9. After all the fabric is glued, go over its surface with a roller again. You can additionally dry the surface with a hairdryer at a not too high temperature.
  10. Fold the edges and glue them from the inside. Trim off any excess fabric.

use a stiff sponge to clean off the old ceiling covering

Apply glue in thin strips and level the surface of the material

If necessary, dry the ceiling with a hairdryer

if you do everything right, the result will please you

It is very important to glue the fabric from the center to the edges. If you do everything correctly, you will get a coating indistinguishable in quality from the factory one.

There are also some types of fabric with a self-adhesive backing on sale. The principle of gluing them is almost the same as described above, except that the glue itself no longer needs to be applied.

Car roof replacement

Welcome to the kuzov.info blog!

Today we will look at the procedure for replacing a car roof.

The roof panel is one of the largest areas of the body. The roof assembly with reinforcements is part of the load-bearing structure of the body. According to safety standards, the roof must be able to withstand a load of 1.5 to 2.5 times the weight of the car on which it is located.

Different roof designs require different repair procedures.

Roofs have mainly the following designs:

  • The roof is separated from the body pillars by a “gutter”, on which a molding is installed that covers the place where they are connected.
  • The roof and body pillars form one panel. They also have a connection point, but it is sealed at the factory with copper solder and is invisible under the primer and paint.

To replace the first type of roof, it is necessary to drill out the roof sheet at the factory resistance welding points. In the second case, it is necessary to cut off the roof along the pillars and, after preliminary marking, weld the new roof to the remains of the body pillars.

How to cover the ceiling of a VAZ 2109 with your own hands

Home / House construction / Ceiling / How to cover the ceiling of a VAZ 2109 with your own hands

  • 1 Pros of remodeling
  • 2 Material 2.1 Alcantara 2.1.1 Advantages and disadvantages

2.2 Leather 2.3 Velor 2.4 Carpet 2.5 Vinyl 3 Upholstery and its technology

  • 3.1 Sequence of operation 3.1.1 Covers

3.1.2 Doors 3.1.3 Armrests 3.1.4 Ceiling 4 Detailed algorithm for reupholstering the ceiling with carpet

VAZ 2109 interior modification

VAZ 2109 interior remodeling - this will be discussed in our article. As a rule, tuning or alteration of the interior of a VAZ car is done due to individual needs. The interior trim of the VAZ 2109 is often changed. You will learn about this and much more from our publication.

For any owner, comfort in the cabin is an important thing. Modern automakers are doing everything possible to improve the design, make it unusual and attractive from the consumer's point of view. Our VAZ 2109 salon, to be honest, did not show off, although it has other advantages. But it’s okay, because you can always find time and devote it to reupholstering. This operation is carried out not only because of the unattractiveness of the VAZ 2109 interior itself, but also for a number of other reasons. So, over time, the lining on the ceiling wears out, the general condition of the interior deteriorates, you want to add some variety, give it an original look. In short, there are plenty of reasons.

Note. Interior tuning is considered a fairly popular procedure among car enthusiasts and is carried out frequently, as it does not involve complex operations.

The most crucial moment, according to many, is the choice of material for the upholstery. The final result, the outcome of all the work done, depends on this. In our markets today you can find a huge number of such products, which eliminates the problem of finding the right material. You can also choose something to your liking in specialized car dealerships.

When choosing a material for remodeling the interior, it is first recommended to pay attention to the following indicators:

  • Price, or rather, price/quality combination;
  • Ease of use and cleaning, which is called practicality of the material;
  • Durability, as evidenced by the strength of the product.

Note. As for the texture and color of the material, everything is individual. As they say, there is no friend to taste.

A material that experienced tuning specialists often pay attention to. In particular, due to the fact that this material is relatively light, it is recommended to be used in upholstery

Advantages and disadvantages Non-woven form of the material, which is explained by the fact that the material is made from superfine fibers High cost Many varieties today, including covers, materials for doors, torpedoes, etc. Lightweight material Strength and durability No gloss Easy to clean and incredibly resistant to ultraviolet rays Very resistant to “fallen cigarette butts” Elastic

A material that is also considered as the best option. It's no secret that leather interiors are considered chic and are found only in expensive cars.

Very durable and durable material Heats up quickly in hot weather and “steams” Durable In cold weather, leather takes longer to heat up than rag material (on the other hand, it all depends on the quality of the leather, its type) Leather is not afraid of accidentally falling cigarette butts or water Requires more careful care

It is considered a budget material, but has taken root well among tuning masters. Gives a decent appearance.

Low cost Durability Requires virtually no maintenance Breaks quickly In any weather quickly “adapts” - warms in winter, keeps cool in summer Easy to clean if you have a vacuum cleaner, detergent and brush

Recently it has become more often used than before. Carpet (translated from Armenian as “carpet”) is one of the types of carpet materials.

The procedure for re-upholstering the ceiling

  • You need to remove the ceiling panel (textolite matrix), remove it from the car through the rear door opening and place it on the desktop.
  • Remove the old fabric covering from the matrix and clean off any remaining adhesive (you can use a solvent).
  • Sand the surface of the ceiling matrix with fine sandpaper (a slightly rough surface holds the glue more tightly).
  • Glue the new fabric onto the surface of the matrix using glue, applying it in strips every 10 cm (starting from the center and smoothing the fabric to the edges with your hands).
  • Carefully glue all reliefs and indentations along the handles and visors.
  • Trim excess fabric around the edges and cut mounting holes.
  • Place the ceiling matrix in place in the cabin, secure it with mounting clips, and install the plastic frame.

To glue velor fabric to the ceiling panel, you can use polychloroprene “Glue 88”, German Mah or Polish GTA Boterm. You can also use adhesives with polyurethane additives - “Demoskol”, “Titan”, “Moment”, Kaiflex K414.

First stage. Removing the sheathing and preparing the roof.

- carefully unscrew and remove the sun visors

— unscrew only the top screws of the plastic side posts;

— unscrew and remove the top handles on the driver and passenger side (first pry up the plastic parts covering the screws, and then unscrew the screws);

— remove the front and central lampshades (first the cover, then carefully remove the lamps, unscrew the lampshades themselves and disconnect the power);

— from the side of the rear window, carefully pry up the three pistons for fastening the trim using a screwdriver.

We remove the upper trim from the passenger compartment through the open trunk. Next, remove the factory sound insulator and treat the roof with a degreaser (or alcohol) to remove any glue residue.

Third stage. Installation of the casing in its original place.

We install the casing in the reverse order of dismantling. It should be noted that you should not overuse the amount of sound insulation on the roof, as there may be a problem with fastening the roof sheathing - the screws are not long enough.

In addition to reducing noise, installing additional layers helps improve thermoregulation in the car interior in the summer, and will also eliminate the formation of condensation in the winter.

Radio with monitor Pioneer AVH-3100DVD for 2990 rubles!

  • Touch or button control of your choice;
  • Support MP3/WMA audio formats, support MPEG4/DivX/AVI video formats;
  • USB input, 3.5 mm input, and several RCA inputs;
  • Screen with a resolution of 800×480;
  • The stylish red backlight of the radio makes it easy to control it in the dark.

Find out details

What not to do when gluing the ceiling in a car

If the ceiling lining is sagging and you are doing the work yourself, remember a few important rules:

  • Pasting the ceiling panel should only be done in a well-ventilated area.
  • Adhesives must be non-toxic, sufficiently fluid, suitable for gluing fabric, metal and plastic, and not leaving marks after drying.
  • A black ceiling should not be glued with a white compound.
  • For work, it is better to attract an assistant who will help stretch the fabric when gluing it onto the matrix.
  • It is necessary to work in personal protective equipment: a respirator, safety glasses, and overalls.

In conclusion, it should be noted that sagging of the upholstery fabric on the ceiling after dry cleaning the car interior is a common phenomenon associated with low-quality materials or manufacturing defects. However, eliminating the problem that has arisen is not difficult - it is no more difficult than ordinary wallpaper gluing.

The main thing is to choose high-quality velor to replace the old upholstery, reliable and non-toxic adhesives, and then carefully replace the fabric, following our recommendations.

Source

Ways to improve interior quality

It’s difficult to put up with a situation where the ceiling of a VAZ 2115 is sagging; it’s simply not aesthetically pleasing on the one hand, and on the other hand it does little to improve the level of traffic safety

Upholstery that moves up and down distracts the driver's attention and irritates passengers. Among other things, practice shows that the car's developers poorly chose the material and color of the upholstery, which gets very dirty in places of contact with the heads of passengers and the driver. This state of affairs is due not only to the low quality of materials, but also to the unsuccessful way of fixing this element to the car body. Thus, tuning the interior of a VAZ 2115 can pursue two goals: eliminating sagging parts of the upholstery and reducing the tendency for dirty spots to appear on the material. There are several ways to eliminate the identified deficiencies. The most inexpensive method is to reupholster the VAZ 2115 ceiling with high-quality fabric over a standard upholstery element. If the work is carried out carefully, the result is simply excellent, despite the fact that the cost of such an operation is relatively low. In fact, it will be equal to the amount spent on purchasing materials, provided that all the work is carried out independently. However, this technology does not solve the problem of eliminating extraneous noise and sagging of the ceiling trim element

Here you will need completely different means and the use of a non-standard finishing element. Currently, you can purchase such parts in retail stores both as a set and as a separate part. If you need something original, you can order what you need from specialized enterprises.

Ways to restore a sagging ceiling in a car

If the ceiling is sagging, you can try the simplest thing - restore the fixation using a household hair dryer. If this does not help, then repairs should be performed in one of two ways:

  1. Complete dismantling of the ceiling with reupholstery.
  2. Local repairs of individual areas.

You can contact car service specialists who will quickly solve your problem for money, or you can try to restore the ceiling in the car with your own hands.

Professional car workshop

If the fabric of the ceiling lining has come away from the ceiling panel, the service station technicians will restore it using professional equipment, materials and technologies. But repairs will not be cheap.

Solving the issue yourself

You can restore a sagging ceiling in your car on your own. To do this, you will need to purchase the necessary materials: fabric, adhesives, foam rubber, as well as prepare tools and study step-by-step repair technology.

Guide to reupholstering VAZ 2115 interior elements

Detailed instructions with a step-by-step and illustrative description of the process will help you perform all the operations yourself. At some stages you will need the help of an assistant, and he does not necessarily have to have any qualifications

It is important not to rush when carrying out work and act strictly in accordance with the instructions for the use of adhesives and other components

List of required materials and tools

The list of materials required for reupholstery includes:

  • A piece of technical fabric such as “carpet” or another at the discretion of the vehicle owner. The minimum size of the canvas is 2.3 m in length and 1.4 m in width.
  • Universal glue in tubes, you can use “Moment” or something similar.
  • Aerosol adhesive composition for permanently joining fabrics with a variety of solid substrates; in our case, glue of the “Dinitrol” brand was used. However, this does not limit the master’s choice.

You don’t need any special tools for the job; you can get by with a simple set, as shown in the list below:

  • scissors large and small for working on fabric,
  • screwdrivers with Phillips and straight slots for dismantling interior parts and ceiling covering.

In principle, everything you need for the work can be found in any house or garage; you will still need a little free space for gluing the ceiling with canvas. To make this operation easier and to achieve maximum quality, it is better to use a table or other hard and clean surface.

Preparatory operations for re-upholstering

Work on altering the ceiling is carried out with the battery disconnected from the power supply and the car doors completely open, and begins with dismantling the part in the following order:

  • Using a screwdriver and a shaped slot, we unscrew the screws from the mounting sockets for the trim of the front pillars, and by prying them off, remove them and put them aside;
  • Using the same tool, we dismantle the door handles and sun visors;

Removing interior trim elements

the following operation should be performed extremely carefully so as not to damage the parts; use a straight-bladed screwdriver to remove the interior lighting; carefully lower the ceiling part down; when dismantling, do not use excessive force to avoid deformation or damage to parts of the cladding.

Removing the ceiling lining

Now you can begin the actual work of reupholstering the ceiling or installing a pre-purchased element of a non-standard design. The photo clearly shows the shape of this element, which has recesses in the places where the visors and interior lighting fixtures are installed; these places will require special attention when carrying out the main work of covering with fabric.

Technology of reupholstering parts with technical fabric

To obtain a good result, it is necessary to create appropriate conditions, therefore it is better to do the pasting indoors at room temperature. Given the strong and unpleasant smell of glue, the room should be well ventilated. It is better to place the part on the table, and the order of work, which can be found by watching the video, is performed in the following order:

  • We lay the fabric on the ceiling so that it completely covers it and protrudes at the edge by at least 50 mm.
  • We begin to attach the fabric from the back of the part where the ceiling is practically flat.
  • The adhesive is applied to both the fabric and the surface of the ceiling; from the moment of contact between them, it is necessary to allow time for the glue to dry slightly.
  • You should not try to immediately grab a large area; the lubricated fragment should be no more than 150-200 mm.
  • We apply the canvas from the center and smooth it towards the edge; this can be done with a roller or with your hands.
  • When gluing the recess, we smooth the fabric especially carefully so that not even the slightest hint of folds remains.
  • We paste the sun visors in the same way. On their inner surface, it is advisable to provide in advance a flap for a mirror and a pocket for documents.

Other similar problems and solutions

The cause of sagging is not always due to poor installation. The options can be very different.

Sagging from water

PVC film does not allow moisture to pass through. If neighbors are flooded, liquid will accumulate in the canvas, which will stretch under the weight. Thanks to this, in the event of a leak, the rest of the repairs and furniture will be saved.

To distinguish this case, run your hand over the bubble. You can feel the heaviness and rolling of the water.

Important! If such a problem is discovered, you must immediately turn off the power to the room. Otherwise, a short circuit may occur.

The film stretches well, but breaks on contact with sharp objects. The sagging ceiling is inspected and everything that could damage the canvas is removed, for example, the edge of a chandelier or cornice. If a lot of water has accumulated, even pencils and pens in a stand on the table become dangerous.

Next, it’s better to call specialists who know exactly what to do. Moreover, if you manipulate the ceiling yourself, the warranty will be void. But if the deadline has already passed, and there is not enough water, you can try to cope on your own. You will need an assistant.

Under no circumstances should you pierce or cut the film! Under pressure, even a small hole will immediately open.

Instead, remove the chandelier or spotlight. One person places a bucket under the hole, and the other carefully “rolls” water to the desired location. Another way is to use a hose. It is inserted into the hole and directed to the place where water accumulates, and the other end is lowered into a bucket.

After the liquid is removed, the film remains stretched. To restore the surface, you need to dry the material with a heat gun. In mild cases, you can get by with a powerful household hair dryer. The film heats up and is re-stretched.

Read more: How to drain water from a suspended ceiling yourself

Air inflation

The cause is cracks in the base floor, walls or at the junction between them. Air gets inside, presses on the canvas and stretches it. Sometimes the effect appears constantly, in other cases it occurs when there is a draft when the windows are opened.

To make sure that this is precisely why the stretch ceiling sagged, slightly lift the film near any hole - the wind will blow from it.

To correct the situation, there are two methods that are sometimes used together. The first is to remove the canvas, seal all the cracks and install it back. The second is to install ventilation grilles. It is better to find secluded places for them: above the closet, behind the eaves or in the corner.

Read more: What to do if the suspended ceiling is inflated with air

Cold deformation in winter

PVC fabric is exposed to temperature: it increases in size due to heat, and shrinkage occurs when it cools. This property is used during installation to obtain a smooth surface.

But the cold shrinks the film too much. It may even become deformed and crack. Therefore, PVC sheeting is installed only in houses for permanent residence that do not freeze in winter.

Falling off plaster

Before installing a stretch ceiling, you need to prepare the base. The remains of the old finish are removed from the base floor and then primed. If this is not done, over time, plaster, lime, etc. will begin to crumble. Small pieces will stick out unsightly, and large pieces will stretch the canvas.

Second phase. We install sound insulation.

First we glue the vibration-isolating layer. The vibration isolator is already supplied with an applied adhesive layer (you just need to remove the protective film). The roof is divided into three tin rectangles by stiffening ribs. Measure and cut three pieces of vibration to cover the maximum area of ​​the roof. Then, having removed the film, carefully glue the layer, smoothing it from the middle to the edges so that there are no air bubbles left. You can use a wallpaper roller for these purposes.

After the vibration isolator comes the turn of the sound-absorbing layer. The material also has an adhesive layer on one side, which simplifies the work. We try to cover the entire roof area with a sound insulator, including the stiffeners. We do not allow the formation of air bubbles. Sound insulation installed. By the way, to improve adhesion, you can preheat the soundproofing materials with a hairdryer.

What materials are needed

To install sound insulation, we will need a minimum of tools and materials: - vibration isolator (manufacturer does not matter, thickness up to 2 mm); - sound insulator (manufacturer - any, thickness from 4 to 8 mm); — universal degreaser (ordinary alcohol can be used); - hair dryer; - wallpaper knife; - car screwdrivers.

ATTENTION! Now you can buy a completely new Pioneer MVH X580BT processor radio for only 2990 rubles! Don't believe me? Then follow the link and see for yourself! Read more"

Calculate the amount of noise-insulating and vibration-insulating material depending on the area of ​​the car roof, assuming that the materials will be laid in one layer.

How to cover the ceiling on a VAZ 2114 with your own hands

Without a doubt, a beautifully designed ceiling plays a big role in comfort in the car interior. A correctly selected ceiling color that matches the color scheme of the entire car interior, high-quality work done and beautiful interior lighting will make the interior of your car pleasant. We’ll tell you how to properly re-stretch the ceiling in this article. It is best to cover the ceiling together with the reupholstery of the entire car interior. Then the overall appearance of the interior will look more comfortable when you only reupholster one ceiling.

  • Which glue to choose for reupholstering a car ceiling?
  • What material should I use for covering the ceiling?
  • How to reupholster a ceiling with your own hands?

I will try to answer all these questions in order.

Hello! On the Internet I am known as Jerome Holden and I make money by testing the algorithms of the well-known Vulcan casino: I look for vulnerabilities in games, place bets and win the jackpot.

Now I'm gathering a community for a more global project, so I'm sharing the schemes for free. I tell you everything in as much detail as possible, there is nothing complicated, you can work directly from your phone, even girls can handle it)). You can test the algorithms, earn money and decide whether to join my team or not. Details here.

In three months I earned 973,000 rubles from my schemes:

In order not to be unfounded, I am posting 3 of my favorite schemes. It's time to rob the casino!

It all starts with choosing the color of the ceiling. The most popular ceiling color is black. I don’t know why so many people choose it, but it really is. In my opinion, the black ceiling is pressing. I don’t know, but I feel somehow uncomfortable in such a car. On the contrary, many people like the black ceiling the most. In general, the color scheme of the entire interior should match. You understand that a light interior and a black ceiling will not look good, or a black interior and a red ceiling, etc.

Choosing glue for work

Another important step in preparing to reupholster a car ceiling is choosing the right adhesive. This process is not as simple as it might seem at first glance. There are many nuances in choosing an adhesive: upper temperature conditions, composition, exposure to sunlight and even smell.

One of the most popular compositions for reupholstering interiors is universal glue 88. It is inexpensive and holds the material quite firmly, so it is often used at home. However, it has significant drawbacks. The main one is fumes that have a strong unpleasant odor, which can be poisonous in large doses. General deterioration in condition, nausea and dizziness are not the best companions for a driver who must always be focused on the road. Whether to take risks and use this glue is up to you to decide, but we would recommend better compositions.

What influences the replacement

There are two main factors that force motorists to replace airbags.

  1. Natural wear and tear. Each pillow has its own service life, exceeding which is very rare. Often they don’t work it out for the second reason.
  2. Mechanical impacts leading to breakdowns. These are our roads, potholes, accidents, collisions with manholes, etc.

When replacement is required

There are several factors you should know about replacing engine components.

Situation

Peculiarities

If you feel vibration in the body, you should definitely check the condition of the supports. This effect can be caused by various reasons, but pillows are one of the main

Replacing the timing belt

When replacing a belt, removing its cover can be very difficult, since the engine is almost tightly pressed to the right mudguard of the front wheel. You have to remove the pillow in order to fully carry out repairs.

The engine sags, loads the CV joints

Due to the impact of the engine weight on CV joints, their geometry changes, which leads to a significant reduction in the service life of the elements. The resource is reduced, it is necessary to carry out replacements ahead of schedule

There is a knocking noise in the backstage area

It may be barely noticeable. But its presence indicates that the engine has sagged. Consequently, the supports do not work properly and need to be replaced

If you do not replace the supports in a timely manner, this will lead to more serious consequences and expensive repair of the breakdown. Therefore, it is better to replace the pillows when primary signs of wear are detected. To do this, we additionally recommend periodic inspection of the unit.

Before replacing your car roof

  • Remove interior parts that may interfere with access when dismantling and installing the roof.
  • Cover the interior with material that protects against sparks. Protect the remaining glass on your car.
  • Before dismantling the roof, you need to check all the geometric parameters of the car body. If necessary, correct distortions. After dismantling and before installing a new roof panel, you need to again measure the distances of the control points related to the roof and only then begin the fitting and installation procedure.
  • Before cutting off the roof, make sure that the car is level and there are no body distortions. The roof affects the rigidity of the body and receives a certain load when the car is uneven, so when replacing it should not be under load. You can put the machine on a slipway, if possible, to completely remove the load. Before welding, you need to measure all distances and attach a new roof. All edges must match exactly. If necessary, you need to “tighten” the desired area using hydraulic or mechanical stretching.
  • If the roof that will be replaced was taken from disassembly, then it is necessary to prepare it by drilling out the sheet.
  • You can stick masking tape along the edges of the roof so that when drilling out welding points you won’t accidentally scratch the paint.

? STYLE FOR A PENNY. BLACK CEILING VAZ 2114.

STYLE FOR A PENNY. BLACK CEILING VAZ 2114. More details

AMAZING SALON TUNING FOR 500 RUR. DIY BLACK ceiling. 2114. Tuning FOUR Read more

Painting the CEILING IN VAZ 2114, Luxury salon for pennies Read more

LEATHER SALON WITH YOUR OWN HANDS! Save money. TORPEDO ON STYLE Read more

BLACK ceiling Auto Do It Yourself More details

New door cards with ceiling for VAZ 2114. Four!! #FOUR #VAZ2114 #MUSIC #CHYRKA #LADA More details

TUNING of the interior for 3500 rubles. VAZ 2114 / BLACK ceiling / LEATHER gear knob and handbrake / ARMREST Read more

BLACK CEILING FOR VAZ 2114 More details

BLACK HEADLIGHTS on a VAZ 2114 and a LIP on the bumper / CLEAR view for PENNY Read more

EVIL HEADLIGHTS for 700 rub. VAZ 2114. More details

MY FIRST TIME. We clean the CEILING in a VAZ 2114 for 77 RUBLES. “Four” (Episode 3). More details

TUNING the VAZ 2114 salon in style! More details

Black ceiling on VAZ 2115 ||| An effect that no one expected. More details

BLACK ceiling VAZ 2109. HAS A LOOK! SPACE SALON Read more

Black ceiling on a VAZ 2110-12. Do-it-yourself ceiling reupholstery, roof vibration insulation. More details

Not BLACK ceiling on VAZ 21099 | We paint from a spray can, with our own hands Read more

300₽ and she’s a bandit, strict look, everyday life, operas on 9tka, people’s reaction they wow, 14ka has transformed Read more

DIY black CEILING for VAZ 2114 and VAZ 2109 Read more

The procedure for replacing a car roof panel

  1. Check all joints with adjacent panels.
  2. Cover the inside of your car with protection from welding and grinding sparks.
  3. Remove the roof trim and plastic interior parts that interfere with removal of the trim.
  4. Disconnect all plugs.
  5. Remove the windshield and rear glass. You can read the article about replacing the windshield.
  6. Drill out all the weld points securing the old roof sheet.
  7. Remove the sealant.
  8. Remove the roof sheet.
  9. Clean the roof installation area.
  10. Align all the flanges that the new roof will rest on.
  11. Try on a new roof.
  12. If the roof fits properly and all edges match, try on the windshield and rear glass. They should fit easily into openings and have even gaps from the edges of the opening around the perimeter.
  13. Install and weld the new roof.
  14. Install the windshield and rear windows.
  15. Assemble the salon.
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]