Installing a Europanel on a VAZ 2110

Replacing the instrument panel on a VAZ 2110 is not an easy task, but you can do it yourself, as long as you have the necessary tools. Today, many people install a special euro panel on their cars for the VAZ 2110. This work has some subtleties, even difficulties, but first things first.

To carry out repair work, you should have a set of tools at hand:

Phillips screwdriver, different sizes.
10 mm deep head wrench.
Driver or ratchet.
Knife.
A flashlight may be needed.

What should be considered when replacing a torpedo on a VAZ 2110

Replacing the torpedo on a VAZ 2110 will not only add some charm to the car, but can greatly improve the ride comfort not only for the passenger, but also for the driver. After all, you can replace the dashboard with a torpedo. When replacing it, the following points should be taken into account:

What exactly does the car owner want to achieve with a replacement? This could be an increase in space in the cabin in front of the front seat.
Just to give, so to speak, an expensive look to the car.
Organize a place to install additional devices - radios, screens, and so on.

In any case, you can get the most beneficial effect from such an undertaking.

It is also worth considering the category of people, passengers, who will be in the car. This will sometimes improve the safety of the vehicle.

Once the type of torpedo is determined, it is worth thinking about what additional functions it should perform. This could be the installation of additional equipment, space for mobile phones, space for a car audio system - speakers, or a radio.

The next stage is choosing a coating. It is best to get it as universal as possible and try to install torpedoes with the following coatings:

Plastic. The torpedo is made entirely of plastic without unnecessary inserts.
Plastic with wooden or leather inserts.

These are the two most popular types of torpedoes for the VAZ 2110, which are the most practical to use and will best suit almost any type of interior.

What is included in the design?

To make it easier to remove the entire dashboard or its individual elements, you need to know what the structure consists of. In a VAZ 2114 car, the dashboard includes 11 main elements, which are shown below:

Dashboard base. It contains controls for interior systems.

Overlays. This part is needed to securely fasten the base.
Bracket.
The sealing element is a plug.
Ashtray.
Crossbar, there are two of them. The number “6” shows the right one.
Right dashboard screen.
A shield that blocks access to the wiring.
Central bracket.
Left screen of the instrument panel.
Left cross member.

In VAZ cars, you can improve the appearance of the dashboard. To do this, you need to unload the dashboard from the dials. More stylish and modern information devices are usually installed to replace them. The same applies to the backlight; if you wish, you can update it yourself and install modern original LEDs.

By dismantling these elements one by one, you can completely disassemble the dashboard. Below you will find detailed instructions with which the motorist can completely remove the dashboard elements from the car.

We install Europanel and make sound insulation on VAZ 2112, VAZ 2111, VAZ 2110

Installing PTF on a VAZ 2110 with your own hands
Now we will try to figure out how to install the European version of the panel on a domestic VAZ-2110 car. Before starting the installation process, you need to decide for yourself the need for noise insulation of the body of a domestic car. The thing is that these procedures are better and easier to perform simultaneously. We take the European panel and carefully examine it. What the overlay itself looks like and what the inserts for a variety of buttons and air passages look like. In addition, consider what the panel plugs, bracket, and also the button for heating the glass of the rear of the car look like.

We have at our disposal only the factory version of the domestic VAZ-2110 car, which is equipped with the same factory panel. First of all, do not forget about caring for your car. Before we begin the process of replacing the panel, we begin work related to noise insulation of your vehicle.

To do this, we will need about six sheets of BIMAST-DOMS, as well as about three to four sheets of splen. Of course, we are talking about material that is designed with a margin for malfunctions. In addition, it is worth purchasing thin foam rubber that can self-adhesive; five sheets in size will be quite enough. First, you need to remove the front seats of your car. As for the upper part of the genital tunnel, it must be removed using a screwdriver. After this, we remove the lower part of the tunnel.

After this, we begin to remove the steering casing and steering wheel, and to do this you need to unscrew three self-tapping screws and only four screws. After this, it is necessary to remove the switches under the steering system. Having completed all of the above, we carry out work that involves dismantling the unit, relay and glove compartment, after which we remove the headlight control and the instrument panel. And finally, having reached the fasteners of the factory panel, we unscrew them too. Now all that remains is to remove it from the car body, and in the process of disconnecting it is necessary to unscrew everything that connects the panel and the car’s instruments. Remember that the factory noise insulation system must also be removed, because now you will have a new one. The standard domestic panel trim must be removed and a universal instrument panel must be installed. Now you need to secure the instrument harnesses and seal the joints of the air holes. It is also worth remembering that additional functions will require additional buttons, which will find their application in the European version of the car panel, and of course, additional wires that need to be connected right now, since this will not be possible later.

After all of the above has been done, you can start wrapping in bitoplast and all its connectors, which are available on the euro panel. We also screw the Euro linings using self-tapping screws. After this, it is worth noting that the work associated with installing the new panel is completely completed. Now you can apply materials that will ensure complete noise insulation of your vehicle. After the special material has been applied to all the necessary places, work related to gluing SPLEN must be carried out. Remember that experts note the fact that SPLEN is a fairly convenient material, and the process of working with it will not take a lot of time and will not require much of your effort.

And so, having done the difficult work, the final part of our process has arrived. We install the panel in its place in your car. Remember that you will not need more than two days to complete the entire work, but of the entire period, the largest working part must be spent on making a new connection to the alarm system.

Preparatory work

Some are satisfied with dismantling without removing the remaining components of the interior, but this takes extra time and complicates the process as a whole. In order not to add more work to yourself, it is recommended to clear the interior for free movement. Strictly observing the sequence, you need to remove:

armchairs;
glove box;
steering wheel;
disassemble the floor tunnel. To do this, you need to unscrew the screws and move the part back a little.

We dismantle the lower part in the same way. The next step is to remove the glove compartment, after which you should remove the relay and mounting block. As you disassemble, you need to mark all the wires. Particular attention should be paid to the speedometer.

What types of overlays are there?

Installation of the VAZ 2110 dashboard on Lada 4×4 (VAZ 2121, 2131)

If you just need a Euro pad, then there are two options:

Euro-1 rubber, another name for which is Caprice. It has the same instrument cluster as the VAZ 2110, the only thing is that there is no shelf on the passenger side;

Panel trim VAZ 2110 Euro-1

Panel trim VAZ 2110 Euro-2

There is also a Euro-3 overlay on sale. But it is for later and more advanced VAZ cars - Priora, Kalina. The fact is that this version provides more devices, for example, there is a unit for climate control, which is not observed in the top ten. Although, in principle, if desired, installing this option is also possible.

Panel trim VAZ 2110 Euro-3

Any Euro pad mentioned above is a quality product, unless, of course, it is a cheap fake. It is softer and even, according to manufacturers, less traumatic, like the old one. In addition, after its installation, the supply of warm air to the side windows should improve.

Components

When purchasing, you will receive what is included in the kit, namely:

Europlate;
Inserts for switches (buttons) of devices;
Trim on the instrument panel;
Since your instrument combination may differ from those whose installation is structurally provided, there should also be six plugs; they can be inserted instead of buttons;
The buttons themselves and two pads for them: • Double – for low beam and dimensions; • To turn on the fog lights; • Heated rear window.
Air ducts;
Block and wiring harness designed to connect a double button for side lights and low beam;
Brackets securing the instrument panel.

In addition, if you are not entirely satisfied with this combination, and you need more buttons for other devices, then they, as well as the pads for them, can be purchased separately.

Installation of Europanel on VAZ 2110, 2111, 2112

On the Internet, many are tormented by the question of where to buy and how to install a Euro panel on a VAZ 2110. This is not surprising, the old panel is already tired and I want to somehow update the interior. In this article I will show you what is needed in order to replace the old VAZ 2110 panel with the euro and an equally important question - where to find it:

installation of europanel on vaz 2110

For those who don't understand:

Removing the europanel of a VAZ 2110 is the same as dismantling the old panel, there is no difference (see instructions below).
To replace only the panel trim, it is no longer necessary to remove the panel!

So, let’s look at the panel overlays, which differ in:

Euro-1, another name is “Caprice” and has an index of 21104. The distinctive features of this lining are that it has no shelf.
Euro-2, index 2110L, the cover already has a shelf.
Euro-3, an overlay without a shelf, but under the instrument panel of a new type (Kalina, Priora), has a climate control unit with 3 knobs and a large emergency stop button.

The euro overlay for the panel consists of:

The pad itself
Inserts for buttons (small button insert 2110L-2120031, large 2110L-2120032)
Air ducts (2114-81080623)
Instrument panel trim (2110L-5325124)
Double button for turning on the headlights and low beam
Button for turning on the rear fog lights (with locking)
Button for turning on the heated rear window (with locking)
Pads for buttons - 2 pcs.
Plugs instead of buttons - 6 pcs.
Wiring harness for connecting the dual headlight and low beam switches
Block
Instrument panel brackets
You may need to purchase separately various buttons for the VAZ-2114 and pads for them.

Now we move on to installation, and here we can distinguish two methods, each of which has its own advantages and disadvantages:

Installing the Euro trim without removing the panel

We try on the panel overlay and adjust it if necessary. At this stage, it is recommended to use anti-creak (panel soundproofing). This way, you will insure yourself against squeaks in the future.

To install the dashboard in the Euro trim, you can follow one of the following methods:

Use the brackets from the Euro trim kit.
Use brackets from the old trim (drill).

We connect the Europanel buttons according to the instructions:

The advantage of this method is time. If you have already resorted to dismantling the panel, then you will spend about 3 hours replacing the lining. If this is your first time encountering this type of work, then about 6 hours.

Installing Euro trim with panel removal

If you decide to completely remove the dashboard, then follow these instructions.

Similarly, we cut the euro-overlay around the perimeter, according to the instructions attached to it. We assemble the cover: install the air duct panels and accessories that came with it.

We fix the Euro-overlay to the panel with dozens of self-tapping screws.

Replace the old panel with Euro-3

Buy a Euro-3 torpedo assembled with under-torpedo wiring, find wiring diagrams for the old-style and new-style panels and do the docking yourself. Forum thread.
Buy Euro-3 overlay.

Then you should replace the old-style automatic control system (2 knobs) with a new one (3 knobs) according to this instruction, or this one. Leave the old device, or replace the old-style dashboard with a new one (Kalina/Priora, 1118-3801010-12), again manually connect connectors (they are different) according to pinout diagrams.

Conclusion

VAZ 2110 with Europanel

By the way, if you still want to change the panel completely, then try installing a panel from the Priora in the top ten.

If I decided to replace the VAZ 2110 dashboard, then..

Diagnostics and replacement of Lacetti front arm silent blocks

The diagnostic procedure is not complicated if you follow the algorithm.
The front two wheels are subject to inspection, since the design at the rear is different. The inspection is carried out on the side on which the knock is heard. To ensure ease of access, it is recommended to use a hydraulic lift; an inspection hole and a jack will not help much. After hanging the car using a pry bar, check the condition of the lever. A slight wobble of the mount determines its condition. If there are knocks, creaks, or grinding noises, the part is faulty and the front silent blocks of the Lacetti need to be replaced.

At the same time, preventive maintenance is carried out on the ball joint, CV joint boot, clamp, and drive shaft. If these parts show signs of wear, it is advisable to replace them with new ones to avoid critical breakdowns in the future.

Obviously, these are just recommendations, but the owner should listen to the advice of experts.

On a Lacetti, replacing a suspension arm consists of the following steps: hanging the car with a lift, dismantling the wheel, ball joint, and the arm itself. Two silent blocks are removed from the body using a special puller or hydraulic press, depending on what is available. The surface is cleaned of foreign deposits, rust, corrosion, and each “ear” is treated with lubricant. New silent blocks are pressed into the cavity. The assembly procedure occurs in reverse order.

Depending on the diagnostic results, a decision is made to replace the ball joint, boots, clamps, and CV joints. You should also consider replacing the shock absorber if there are signs of leakage.

How to remove the dashboard on a VAZ 2110 with your own hands - step-by-step instructions + photo report

In order to remove a torpedo on a VAZ 2110, you must perform the following procedure:

Unscrew 2 screws on the right and 2 on the left on the central tunnel.
Next, remove the covers on both sides.
Remove the plug near the handbrake.
Unscrew the screws on the left and right of the central tunnel.
Unscrew the screws at the back of the central tunnel.
Removing the plastic of the central tunnel.
Disconnecting the cigarette lighter wires. Mark so as not to get confused when connecting to the assembly.
Remove the gearshift knob cover.
Using a wrench, unscrew the interior heating air duct.
Removing the air duct.
Unscrew the fastenings of the central panel from the front.
Unscrew the fastenings of the central panel at the back.
We finally remove the panel.
We unscrew the screws of the glove compartment.
We remove the glove compartment.
Disconnect the glove box light wires.
We unscrew the screws inside the space in place of the glove compartment.
Unscrew the remaining screws on the sides of the torpedo.
Unscrew the torpedo bolts as follows as in the photo.
Removing the air duct.
Unscrew the nut on the dashboard under the air duct.
We lower the torpedo from the pins.
We disconnect the wires from the front panel and mark them so as not to get confused during assembly.

Tools

In order to completely remove the housing, you will need:

a set of keys and screwdrivers;
marker;
adhesive based labels.

The main work will involve a 10 mm wrench and a Phillips screwdriver. You will also need a water-based marker, since it washes off easily, it is necessary so as not to mix up the removed parts. This also applies to adhesive labels. There are too many parts and wires, so you shouldn't rely on memory. Stickers and bullet points will help you remember the starting place of all the components.

Instructions for installing the Europanel on a VAZ 2110

Many people simply don’t like the old instrument panel, while others want a Europanel on a VAZ 2110 because the old one has already lost its appearance, so to speak, it’s worn out. In any case, having decided on a replacement, you need to solve a couple more questions: where to get a suitable panel and how will the installation take place: on your own, or will this task be entrusted to specialists?

Panel trim for old VAZ 2110

Let’s be clear right away: there is nothing complicated about installing a Europanel yourself, so it’s quite possible to decide to do it. In addition, you yourself will control all the stages; you may want to carry out others at the same time as this work - to eliminate noise and squeaks while driving, windproofing, etc.

Description

The instrument panel on the VAZ 2110 serves to display the necessary information about the condition of the car and contains a tachometer, speedometer, fuel level and coolant temperature gauges, as well as 12 warning lamps. Due to the fact that it is made of plastic of not very high quality, after a short amount of time the plastic begins to crack or the corner of the instrument panel peels off. To remove these defects, it is necessary to remove the entire dashboard, but how to remove the panel on a VAZ 2110?

Where can I get Europanel?

The fact is that europlates, as well as assembled europanels, have become in short supply, since their production was discontinued more than five years ago. Therefore, they mostly sell used ones in good condition; it is quite difficult to find a new one. If suddenly the offered product does not suit you, you can install the Priorovskaya by completely disassembling the old one.

Didn't find the information you are looking for? on our forum.

We recommend reading:

VAZ 2110, when you press the gas, the car choke on the injector

The stove does not heat up at idle speed of the VAZ 2110

What is the best gear oil for vases

Gasoline consumption of Lada Vesta, what the manufacturer promises

VAZ 2110 gear shifts poorly: causes, troubleshooting, gearbox diseases

How to change the generator on a VAZ 2107

Gasoline consumption of Lada Largus per 100 km, city, highway, combined cycle

Low beam on VAZ 2114 went out

Installing a new cover

Installation of a new lining occurs after preliminary preparation:

It is necessary to measure and trim off excess material;
But it’s better not to cut off what seemed to be superfluous under the instrument panel, otherwise there will be a gap near the steering column, and you can make cuts to bend it a little if necessary;
Near the side air ducts, trimming is also done during installation, measuring on site;
We carry out fitting and adjust trimming;
We apply anti-creak to avoid squeaking in future operation;
We choose the method of installing the dashboard with a Euro trim: use new brackets included in the kit or drill them out from the old trim;
All that remains is to install the instrument cluster you need and secure the Euro trim with self-tapping screws, which are then hidden under the plastic trim.

Removal and installation of VAZ 2110 panel

Below are step-by-step instructions for removing the “tens” dashboard.

Disconnecting the battery
Remove the steering wheel and steering column switches
Be sure to remove the top lining of the floor tunnel
Remove the glove compartment and unscrew the mounting screws
Remove the headlight hydraulic adjustment handle by pulling it towards you
Unscrew the hydraulic corrector nut and remove it
Remove the upper side air duct deflectors by prying them up with a screwdriver
Under the deflectors we find the panel fastening nuts, unscrew them
We unscrew the screws from the bottom of the dashboard, next to the hood release lever, at the mounting block, in the niche of the glove box, etc.
Now you can remove the door seals, remove the lining covering the front pillars
Disconnect the electrical wiring terminals
You can remove the panel by holding the steering column adjustment lever in the desired position

The fully unscrewed VAZ 2110 panel is supported by two guide pins (see photo above) with white arrows pointing to them. We assemble the panel in the reverse order.

Controls, instrument panel and interior equipment

Controls

Left side deflector.
Outdoor lighting switch.
Instrument cluster.
Egnition lock.
Rear fog lamp switch button.
Rear window heating switch button.
Instrument lighting control knob.
Immobilizer sensor with indicator.
Right side deflector.
Glove box.
Center console.
Cigarette lighter.
Front ashtray.
Gear shift lever.
Accelerator pedal.
Brake pedal.
Clutch pedal.
Steering wheel.
Steering column locking lever.
Hood release lever.

Center console:

Left center deflector.
Air distributor flap control lever.
Recirculation switch.
Blank (reserve space for installing an additional equipment switch).
On-board control system display unit.
Car radio.
Watch.
Blank (reserve space for installing an additional equipment switch).
Hazard warning light switch button.
Heating control unit.
Right center deflector.

Instrument cluster:

Coolant temperature gauge.
Tachometer.
Speedometer.
Fuel level indicator.
Trip counter reset button.
Odometer and trip odometer display.
Clock display.

Control unit between the front seats:

Parking brake lever button.
Parking brake lever.
Front left door power window switch.
Driver's seat belt buckle.
Rear left door power window switch.
Blank (reserve place for installing switches for additional equipment).
Rear right door power window switch.
Front passenger seat belt buckle.
Front right door power window switch.
External rear view mirror control unit.

Note

Some versions of cars of later releases (in particular, models produced) are equipped with a modified instrument panel - the so-called “European panel”.

Left side deflector.
Outdoor lighting buttons.
Instrument cluster.
Egnition lock.
Right steering column switch (windshield wipers and washers).
Hazard warning light button.
Instrument lighting control knob.
Immobilizer sensor with indicator.
Rear window heating switch.
Plugs (reserve places for installing switches for additional equipment).
Central deflectors.
Heater control panel.
Covers for niches for installing car radios.
Right side deflector.
Left steering column switch (direction indicators and headlights).
Hood release lever.
Steering wheel.
Clutch pedal.
Brake pedal.
Accelerator pedal.
Socket for connecting a portable lamp.
Gear shift lever.
Ashtray cover.
Cigarette lighter.
Glove box.
Parking brake lever.

Side light switch.
Indicator for turning on side lights.
Indicator for turning on headlights.
Headlight switch.
Indicator for turning on the rear fog lights.
Rear fog lamp switch.
Plugs (reserve places for installing switches for additional equipment).
Headlight level control.

Tuning the instrument panel of VAZ 2110

How to do tuning of the VAZ instrument panel yourself and replace the light of the lamps with a more pleasant one.

While in a car, the driver most often looks at the instrument panel to look at the indicators of the sensors that are responsible for its operation. This is why instrument lighting should not affect the eyes. However, on many VAZ models, the manufacturer installs yellow or pale green backlighting, which can lead to severe eye fatigue during long trips. Therefore, it is better to tune the instrument panel and replace its light with a more comfortable one.

First you need to select a new color for the dashboard. This is determined only by your imagination. Today on sale you can see light elements of any color, when choosing which you need to take into account several important points. When using the car every day or making long trips, it is better to use a white soft backlight that does not strain the eyes. If the car is rarely used, you can use light green bulbs or another color that is not too straining on the eyes.

Disassemble the dashboard and dismantle the instrument panel. Unscrew the screws securing the dashboard to the car body. Their location and quantity can be found in the manual for your car. On some models, in order to remove the dashboard, you need to disconnect the trim, then lower the steering column all the way down.

Next, to tune the instrument panel, unscrew the bolts located under the trim. Using the blade of a flat-head screwdriver, you need to pry up the instrument cluster to pull it out. Be careful not to leave any chips on the surface of the glass.

Disconnect all connectors from the wires connected to the connectors located at the rear of the dashboard. Pre-mark the pads so that they do not get mixed up during reassembly.

On the back side, unscrew all the bolts. Then you need to carefully disconnect the plastic gasket and glass. You don’t have to dismantle the instrument needles, but all work must be done carefully, without touching or knocking them down, otherwise you will need to align and adjust the sensors.

On the back of the microcircuit you need to find where all the light bulbs or LEDs are located. To ensure accuracy, they must be outlined with a black marker or felt-tip pen, just not thick. Then you need to carefully unsolder them from the microcircuit.

Take new light elements. They need to be checked using an adapter or battery. It is better to use LEDs, they consume much less energy and have a much longer service life. It is also necessary to carefully inspect the metal antennae on each diode, which must be intact.

Install 2 diode antennae in the chip hole left over from the previous LED or lamp socket. Carefully seal the antennae from the back of the chip. Using this diagram, install all the diodes.

Reassemble the microcircuit board in reverse order. You need to start the car and turn on the headlights or low beams to check the functionality of the new LEDs.

How do you like this option?

There are also ready-made tuning panels for VAZ of all models. But they are significantly more expensive than the DIY option, although the build quality will be much higher. After all, not all of us are born with a soldering iron in our hands)))

The cost of finished panels starts somewhere around 7,000 and above.

But naturally, no one will stop at just tuning the panel. Therefore, personally, the next step would be to replace the seats or at least the covers on them. Now there are a lot of different options for good covers, you can even buy car covers wholesale and then sell them in your city. I know that it’s hard to find travel cases in the regions, only Chinese consumer goods, so there will be demand.

Good luck!

LADATUNING.NET

Vibrant variety of colors

Today, the fashion for changing the dashboard lighting is gaining fantastic momentum. Almost everywhere cars have neon lighting or internal LED illumination. However, all these innovations are not a cheap pleasure, which not everyone can afford. The situation is different when replacing the factory backlight with a multi-colored one.

You can, no doubt, use ready-made tuning options, but this will also cost a lot. It is best to do it yourself. In this situation, the main thing is to have the necessary materials and patience. First you have to disassemble the “tidy”. The protective glass must be removed. Next we remove the arrows. To do this, you need to use a screwdriver and hard cardboard.

It should be placed under the arrow, and then pry it off with a screwdriver. Then you need to carefully and slowly lift it to the top. Next, remove the backing. A utility knife will be useful for this. It must be inserted between the panel and the substrate and a layer of sealant must be cut in a circle. Then remove the backing. Let's disassemble the panel and get started.

1. Remove the filter layer using a utility knife. A filter is a colored layer of paint. It is applied from the back of the substrate and gives color illumination to the speedometer numbers and other sensors. To completely get rid of the filter, you can use acetone or another liquid that contains alcohol.

2. Next, change the backlight color. First, you can change the odometer backlight. To do this, you will need to dismantle the odometer screen, and then remove the blue film and remove the backlight bulb. It should be replaced with a multi-color universal LED. He can change colors. We connect the LED to the socket of a standard light bulb. Reinstall the odometer screen.

3. Now you can start completely replacing the backlight. We attach the LEDs to the “tidy” frame. Such LEDs can be purchased complete with a color switch. We install them in place and attach them to the standard dashboard backlight contacts.

4. Let's move on. Now we need to make sure that the arrows have the ability to change the backlight. To do this, remove the layer of red paint from the arrows. For this operation, you can use a stationery knife and acetone. Once the arrow is clean, it can be painted using white nail polish. The main thing is that the arrow is white, since this color conveys the color scheme of the LEDs.

5. Before the final stage, you need to attach the LED color switch to the panel. Such a switch can be installed, for example, in the lower right corner of the dashboard. After this, you can install everything in place. First, the substrate is installed. For greater reliability, you can use a sealant. After this, we put the arrows in place. We insert the protective glass. After that we admire the result.

We cooperate with:

PEC

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: pecom.ru

Business Line

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: dellin.ru

Baikal Service

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: baikalsr.ru

Energy

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: nrg-tk.ru

WHALE

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: tk-kit.ru

Zheldor expedition

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: jde.ru

Vozovoz

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: vozovoz.ru

SDEK

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: cdek.ru

Delivery is carried out throughout Russia and the CIS.

Deadline for order delivery to T.K. from 1 to 4 business days from the date of receipt of funds. (orders are not processed on Saturday and Sunday).

Lead time for orders that include painting services: 5-10 business days.

The lead time for placing orders and “made to order” items is from 14 days; you can check with the manager for more detailed information.

ATTENTION! All fragile goods (headlights, plastic products, glass, etc.), by default, are sent in additional paid packaging from TK. If you take responsibility for the integrity, we can ship without it. To do this, you need to make a note in the comments when placing your order.

For additional information, please contact the managers.

Installing the Euro trim without removing the dashboard

In this option, you need to have a drill and screws on hand.

Rely on the lining mounting diagram and start in order:

Remove the dashboard.
Open the glove compartment and unscrew the three screws from the inside (positions 1,2,3 in the diagram). Trying to unscrew the screw (pos. 9) from the inside near the windshield is difficult, but doable.
Remove the 4 keys (next to the control module) and unscrew the screws from the inside (pos. 4.5)
Unscrew or loosen the fastening by adjusting the backlight (pos.
Open the fuse module and unscrew 2 screws from the inside (pos. 6 and 7)
Now the panel overlay is held in place only by screws, positions 10 and 11. They cannot be unscrewed, so we break them out or lift the overlay by the right edge and cut them off with a file. (Note: the Euro trim will cover the entire top of the panel up to the windshield, so you don’t have to worry about the appearance when you cut or break the screws)
Remove the old dashboard trim.

How to remove the Europanel on a VAZ 2112 + video

The average owner of a VAZ 2112 rarely faces the need to remove the instrument panel of his car. The main reason why you have to dismantle the Europanel is body repair, electrical repair or repair of devices installed directly behind the instrument panel. Since it can be very difficult or even impossible to get to such devices without removing the instrument panel, in such cases you have to remove the entire europanel. Removing the instrument panel is also required when eliminating squeaks and other noises that occur while driving a car, or when installing additional sound insulation for the interior. In addition, even with careful handling of the car, over time the instrument panel may lose its appearance and require replacement with a new one.

In this article we will try to cover the main stages of removing the europanel from a VAZ 2112 car. The “Euro” instrument panel can be found on cars of the VAZ 2110, VAZ 2111 and VAZ 2112 line. Therefore, everything that will be said below about dismantling the VAZ 2112 europanel is also true for the rest models. In addition, it should be noted that the fastenings of the Europanel are identical to the fastenings of a conventional instrument panel, so this step-by-step instructions can also be used when dismantling a conventional panel.

So, when removing the Europanel from a VAZ 2112 car, the sequence of actions should be as follows:

For safety reasons, it is necessary to turn off the power to the vehicle's on-board network. To do this, you need to disconnect the negative terminal from the battery.

The steering wheel needs to be removed. To do this, use a flat screwdriver to pry up and remove the decorative trim with the inscription “LADA” from the steering wheel. Next, using a Phillips screwdriver (PH2), unscrew the two screws that are located in the recesses under the removed cover. After this, remove the horn switch cover.

Now you need to fix the steering wheel. This can be done in two ways: turn the steering wheel all the way to the left or remove the key from the ignition switch and turn the steering wheel in any direction until it clicks when it locks. After this, you should unscrew the central nut holding the steering wheel. To do this, you will need a socket wrench with a 24mm head (for convenience, it is advisable to use a socket wrench with a ratchet).

For safety reasons, there is no need to immediately remove the central nut - it should be left on the last 3-4 turns of the thread. After this, set the steering wheel to the middle position (the front wheels should be parallel to the longitudinal axis of the car). In order not to waste time finding the correct position of the steering wheel when installing it, before removing the steering wheel, you can apply coaxial marks on the steering wheel itself and the upper plastic cover of the steering column.

Next, you need to use medium-force blows on the rear of the steering wheel from the left - right and from above - from below to knock it off the splines of the steering shaft. After this, you can completely unscrew the central nut and remove the steering wheel.

The process of removing the steering wheel from VAZ 2110-2112 cars is shown in detail in the following video:

Now you need to remove the side panels on the left and right sides of the center console. Each shield is secured at the rear with two screws, which must be removed using a Phillips screwdriver (PH2).

Next, use a Phillips screwdriver (PH2) to unscrew the screws securing the glove compartment, located underneath the glove compartment at the front wall of the car interior. Having removed the glove compartment from its place, it is necessary to disconnect the wires going to the glove compartment illumination lamp. After this, the glove compartment can be completely removed.

The next step is to use a Phillips screwdriver to unscrew the screws securing the instrument panel. One of the screws is located in the glove compartment niche, the rest are along the edges at the bottom of the instrument panel.

Now you need to use an 8-mm open-end wrench and a Phillips screwdriver to unscrew the screws securing the instrument panel in the area of the center console.

After this, remove the protective grilles of the air ducts located along the edges of the instrument panel. To do this, just pry them off with a flat-head screwdriver.

Next, use a socket wrench to unscrew the nuts located under the removed air duct grilles.

Remove the instrument panel from the studs by lifting it up and pulling it towards you. After this, you need to disconnect all the connectors on the wiring harnesses going to the instrument panel, having previously marked them for subsequent assembly. Now the instrument panel can be completely removed.

The process of removing the instrument panel from a VAZ 2112 is shown in the following video:

We hope our instructions will be useful for you!

Dismantling

There is nothing complicated about dismantling the instrument panel on a VAZ 2110; you only need a certain amount of free time, a minimum of tools and your own desire.

The dismantling process consists of the following steps:

Before directly removing the panel, disconnect the negative terminal from the battery, this will avoid future electrical problems;
Using plastic spatulas, remove the top lining of the floor tunnel;
Glovebox. Open the glove compartment and use a Phillips screwdriver to unscrew the fastening screws located at the bottom. After this, you can remove the glove compartment itself, only you will first need to disconnect the wires going to its lighting;
Remove the mounting block with the cover;
Controls. Next, remove the hydraulic corrector mode switching handle; to do this, you only need to pull it out of the panel towards you with a little force. Unscrew the switch nut using the appropriate size socket. Then remove the switch itself from the inside of the VAZ 2110 panel so that it remains hanging on the mounts;
Air system. After this, it will be necessary to remove the upper side nozzles; this can be done by pushing down the plastic latch with a plastic spatula and turning the nozzle. After this, the nozzle can be removed. It is also worth doing from the other side;
Fastenings. The removed side nozzles will provide access to the nuts that will need to be unscrewed. Also unscrew the screws at the bottom of the VAZ 2110 panel on the left, near the hood opening lever, in the niche where the mounting block is attached, on the left and right of the console, behind the glove compartment and at the bottom right;
Seals. Next, you need to remove the rubber seal from the front pillars of the car, and then use a plastic spatula or screwdriver to pick up the trim so that the plastic fasteners come out of their seats. Now the decorative trim can be removed;
Wiring. After the previous steps have been completed, proceed to disconnect the wiring. There is a bundle of wires next to the ignition switch; you need to disconnect the block with the wires from the lock. To do this, you need to cut off the clamp that tightens the bundle of wires and disconnect the block. Next, you need to disconnect the connectors with the wires next to the gas pedal, the immobilizer connector, the two connectors to which the brake signal contacts go, and the connectors on the harness under the instrument panel on the driver’s side.

After all the steps have been completed, you can easily remove the dashboard on the VAZ 2110 yourself and start repairing it. The panel must be installed in the reverse order. To avoid misunderstandings, it is best to mark where you disconnected which wires.

Removing the instrument panel on VAZ 2110, 2111 and 2112 cars is not an easy task. But at the same time, it is possible to carry out this repair yourself, if you have the necessary tools at hand, as well as clear instructions. Regarding the action plan, there are not many detailed guides on the Internet for removing and installing the instrument panel, and all this is due to the fact that the procedure has a number of difficulties and subtleties that not everyone can remember when writing such an article.

However, I will try to make material that will at least 90% help give the overall picture and the main points that should be taken into account when removing the panel on a VAZ 2110-2112. To perform the repair you will need the following tool:

Phillips screwdriver, both short and long
10 mm head, preferably deep
Ratchet handle or crank
Wire cutters or sharp knife
Flashlight if necessary

Installation and repair instructions

View after dismantling the panel

Replacing the panel, especially if you are installing it on an old VAZ 2112, is a certain difficulty. Older machines do not have some of the functions for which the panel has buttons. The wiring may need to be worked on.

Tools and materials

Standard tools will be required.

But a certain amount of additional materials is needed:

you will need plugs for extra buttons that are not needed on an old car;
air duct;
various inserts, buttons (5 pieces) and pads;
a new wiring harness suitable for the wiring diagram;
brackets for mounting the instrument panel;