Immobilizer APS-6.1 and electrical package control system for cars of the Lada Kalina family in the “luxury” configuration – device, operating procedure

There is such a cunning electronics unit in the Berry-Kalinaya car, it’s called “Norma”. "How are you?" "Norm!"

According to the plan of smart people, it should make the already difficult life of car owners easier. Which is what he does successfully. Scientifically, this block module is called quite cleverly - “SDU electrical package “NORMA”, which in translation will be “remote control system”. It looks very brutal - a black slender body, contours that cut off all attempts to ask questions. It has 25 legs, just short of a centipede).

And his legs are not just any kind, but all filled with deep sacred meaning, which, despite all its sacredness, was nevertheless successfully documented and summarized in a single table:

And in light of what I wrote the day before, I actually really need this sign. Because it has a leg “13”, which will do the job of opening the trunk for me when an impulse is applied there with a potential close to “0”, ground, mass. And this impulse will push this diagram, which I hastily drew on a napkin while I was sitting in the dining room and eating cabbage soup, washing it down with compote during lunch:

In general, this is another small step towards a trunk opener...

Auto manufacturers today use many technological solutions to ensure more comfortable driving. One of such devices is CBKE. What is the central unit of body electronics Kalina 2 needed for, what functions does it perform and what malfunctions are typical for it - read in this article.

reference Information

Documents • Laws • Notices • Document approvals • Contracts • Requests for proposals • Technical specifications • Development plans • Document management • Analytics • Events • Competitions • Results • City administrations • Orders • Contracts • Work execution • Protocols for consideration of applications • Auctions • Projects • Protocols • Budgetary organizations Municipalities • Districts • Education • Programs Reports
: • by references • Documentary base • Securities
Regulations
: • Financial documents
Resolutions
: • Categories by topic • Finance • cities of the Russian Federation • regions • by exact dates Regulations
Terms
: • Scientific terminology • Financial • Economic
Time
: • Dates • 2015 • 2016 Documents in the financial sector • in the investment sector • Financial documents - programs

Replacement features

Briefly about the procedure for replacing the control module on Kalina 2:

1. First, the instruments are dismantled from the center console; there is nothing difficult about it.
2. Then the lower part of the center console trim is unscrewed, the trim is removed, and you gain access to the fuse and relay box.
3. The mounting block with safety devices can be unscrewed, but it cannot be removed because it is connected by wires. You can rotate it a little so that it takes a horizontal position.
4. You can stick your hand into the gap formed as a result of turning. Having done this, you will be able to feel the shelf on which the TsBKE is installed. A little to the left there is a bolt with which this module is fixed - you need to unscrew it.
5. After this, through the top, through the instrument panel, you will need to disconnect the two connected connectors. After completing these steps, you can carefully dismantle the CBKE and remove it by slightly moving the fuse box. Please note that you should not pull the device too hard, since there are two more connectors on the other side that will need to be disconnected. When the wires are disconnected, the CBKE can be completely dismantled and repaired or replaced.

Education and science

Science
: Tests • Scientific and technological progress • Pedagogy • Work programs • Faculties • Methodological recommendations • School • Vocational education • Student motivation
Subjects
: Biology • Geography • Geology • History • Literature • Literary genres • Literary characters • Mathematics • Medicine • Music • Law • Housing Law • Land Law • Criminal Law • Codes • Psychology (Logic) • Russian Language • Sociology • Physics • Philology • Philosophy • Chemistry • Jurisprudence

Personalize existing features

The manufacturer has provided for the timing of regular technical inspections, which are mandatory. For non-compliance, the company reserves the opportunity to deprive the car owner of the right to free service.

The most vulnerable is the comfort block, which includes many logical circuits. Its purpose boils down to the following functions:

• activation of interior lighting;
• adjusting the operation of car alarms;
• turning on the heated rear window;
• automatic mirror adjustment;
• control of electric windows;
• remote control of locks.

The manufacturer has provided the ability to personalize each element. To do this, the electrical package control unit must be recoded at an authorized automotive center. Using official software, the wizard will add or remove certain features. If everything is done correctly, 20 minutes after requesting the appropriate service, you can safely use the “iron horse”.

Business and finance

Business
: • Banks • Wealth and prosperity • Corruption • (Crime) • Marketing • Management • Investments • Securities: • Management • Open Joint Stock Companies • Projects • Documents • Securities - control • Securities - valuations • Bonds • Debts • Currency • Real estate • (Rent) • Professions • Work • Trade • Services • Finance • Insurance • Budget • Financial services • Loans • Companies • State enterprises • Economics • Macroeconomics • Microeconomics • Taxes • Audit Industry
:
• Metallurgy • Oil • Agriculture • Energy
Construction
• Architecture • Interior • Floors and ceilings • Construction process • Building materials • Thermal insulation • Exterior • Organization and production management

Photo blogs

Art

• Children's creativity • Paintings • Art • Congratulations • Film review • Musical world • Russian rock

World

• People of the world • The world around us • My homeland is the USSR • Nature Channel • Stones and minerals • Cooking, food • Construction and architecture • Under construction • Transport • Weapons • Military transport

beauty

• Fashion Pandia.ru • Girls and Girls

School

• Tests for the Unified State Exam • Solver books • Unified State Examination • 10th and 11th grades • Various textbooks • 4th grade • Russian language grades 5-9 • 5th grade • 6th grade • 7th grade • 8th grade

Wisdom

• Cliparts • Quotes

Author Directory (private accounts)

Auto Auto service • Auto parts • Products for auto • Auto repair centers • Auto accessories • auto parts for foreign cars • Body repair • Auto repair and maintenance • Car chassis repair • Auto chemicals • oils • technical centers • Gasoline engine repair • auto electrical repair • Automatic transmission repair • Tire fitting Business Automation of business processes • Online stores • Construction • Telephone communications • Wholesale companies Leisure Leisure • Entertainment • Creativity • Catering • Restaurants • Bars • Cafes • Coffee shops • Night clubs • Literature Technologies Automation of production processes • Internet • Internet providers • Communications • Information technologies • IT companies • WEB studios • Website promotion • Software sales • Switching equipment • IP telephony

Infrastructure City • Authority • District administrations • Courts • Utilities • Teen clubs • Public organizations • City information sites The science Pedagogy • Education • Schools • Training • Teachers Goods Trading companies • Trade and service companies • Mobile phones • Accessories for mobile phones • Navigation equipment

Description of CBKE

Unlike the first Kalin models, the second versions and Luxury equipment use an electrical package control unit instead of traditional relays to control the electronics. This device combines many functions, we suggest you familiarize yourself with them in more detail.

Connection diagram of elements and outputs of the CBEK

Functions

The electrical package control unit is designed to perform the following functions:

1. Alarm. If the car's anti-theft system detects a break-in attempt, thanks to the CBKE, it will transmit information about this to the car owner's control panel.
2. Windshield wiper system control. Moreover, we are talking about both manual and automatic control (if the car is equipped with an electrical package control unit marked 21900-3840080-20).
3. The device performs the function of controlling the windshield and rear window heating systems. This unit also controls the heating elements of the side rear-view mirrors.
4. The electrical control unit also monitors the performance of the optics, both in manual and automatic control modes. In particular, we are talking about low-beam headlamps, side lights, and DRLs.
5. Separately, we should highlight the function of ensuring the functionality of the high-range lighting.
6. Turning lights, as well as light signaling.
7. Vehicle interior lighting.
8. The device monitors the performance and energy saving of devices belonging to the category of internal lighting of the car.
9. Monitoring the state of the central lock, as well as performing the functions of locking and unlocking the locks themselves from the key, from buttons installed in the car interior, as well as in the doors.
10. Another option is to open the luggage compartment lid using a button installed in the cabin.
11. An equally important function is the control of electric drives, in particular, we are talking about power windows, as well as side rear-view mirrors.
12. Heating system for driver and passenger seats.
13. Luggage compartment lighting unit (video author - Vladimir Kostyuchenkov).

Non-specific types of services

Even if the rules for safe operation of the vehicle are observed, the heater control unit may require servicing or replacement. This happens as a result of sudden switching of the heating knob of the Lada Kalina car. The operating instructions indicate that you must wait until the system warms up to a minimum, otherwise expensive repairs will be required.

From a financial point of view, the stove control unit will not be cheap, so its careful operation will save the family budget.

The heater control unit cannot be replaced independently due to the need to use special equipment. Much less often problems arise at the level of the engine control system.

The need to visit a service station will be caused by driving on a gravel road, an accident, or the result of unprofessional maintenance. The engine management system is responsible for fuel injection, so any deviations in its operation immediately put the car on hold. How long it will take to replace the engine control unit will be decided by the technician after an inspection.

It is cheaper, but repairs take much longer when the body electronics unit comes under attack. The problem can only be diagnosed in a service center. The duration is due to the fact that if the engine control unit can be replaced as a single whole, then part of the wiring must be changed along with the electronics.

Voltage surges or a simple short circuit can damage a certain sector. The light control unit will be the first to tell you about this.

Incorrectly working turn signals or emergency lights are the first sign indicating a failure in the electronic component of the car. There is no point in delaying a visit to the service center. Otherwise, the ESP unit responsible for dynamic stabilization will come under attack. Even with minor problems, the driver will notice a decrease in the lateral dynamics of the vehicle.

Basket

Double-glazed window control unit “Norma” 1118 – 6512010 for VAZ 11183 “Kalina”

Aktuator On cars of the Kalina family, 2 types of non-interchangeable (by wiring) glass unit control controller 1118 - 6512010 and 11180 - 3763040 can be installed. 1118 – 6512010 has one 25-pin connection connector, 1118 – 3763040 (1118 – 3763040 – 10) – two connectors.

Remote control system for double-glazed windows “norm” on a VAZ 11183, Kalina. Controls power windows and central door locking. When the connector is removed, the engine does not start; the device performs some of the anti-theft functions.

Connection

№	Wire color	Purpose, addressing
1

External Shock or Volume Sensor Input (Not Used)* 2 Pink/Black To Door Lock Switch in Switch Box

3 Brown/Green K‑Line. To Kl. 71 ECM, Cl. 18 APS‑6

4 Brown Connects to ground when the driver's door is closed

5 Gray To heated rear window element

6 Black Mass

7 Pink/White To door lock switch in switch block

8 Yellow/Blue To the instrument cluster, to the APS‑6 indicator

9 Black/White Connects to ground when the hood is opened. C VK engine compartment lamp

10 Two White/Red Connects to ground when opening the rear doors

11 Brown/Red Connects to ground when opening the right front door

12 Output 12 V power supply for external sensor (Not used)*

13

Not used

14 Yellow Pulse + 12 V, closing all doors and trunk

15 Red/Blue K class. 14 APS‑6

16 Blue with Black To left direction indicator

17 Red/Blue Pulse + 12 V, opening passenger doors

18 Red/Black Pulse + 12 V, driver door open

19 Pink/Red Impulse + 12 V, opening the trunk lock

20 Yellow/Blue To terminal “15”, via fuse F 9, in the mounting block

21 Grey/Black “-” Horn relay

22 White/Blue Connects to ground when the driver's door is opened

23 Red To permanent plus through fuse F 5, in the mounting block

24 Blue To right turn signal

25 White/Black Connected to ground when opening the trunk

* A regular shock sensor from any alarm system (Alligator, Saturn, Clifford, APS) is suitable.

+ 12 V connect to pin 12; body – on the 6th; We connect the signal wire (a ground appears on it at the moment of activity) to the 1st contact.

During normal arming, Kalina now reacts to an impact on the body (it sounds a horn and blinks turn signals). Similarly, instead of a shock sensor, you can connect a volume sensor (for example, single-level MMS‑1).

You can also connect a pager: + 12 V of the pager transmitter on pin 12, minus on pin 21.

Double-glazed window control unit 1118 – 3763040 (- 10 ) for VAZ 11183 “Kalina”

Controller board
Controller board

The key code is not readable

1 . 1 Malfunction in the VZ communication coil circuit

1 . 2 Malfunction in the circuit from the block to the communication coil to the APS ECU

1 . 3 Transponder missing in OK

1 . 4 The transponder in OK is faulty (detected during pre-production preparation)

1 . 5 The transponder in the Republic of Kazakhstan is faulty (detected during pre-production preparation)

1 . 6 Malfunction of the input transponder circuit in the APS ECU

1 . 8 The communication coil came off from the VZ pad on the inside

1 . 1 - replacement 1118 – 6105006 (set) - rearrange the transponder - rearrange the remote control 1. 2 - replacing the instrument panel harness 1. 3 -replacement of KSUD -replacement of 1118 – 6105006 (set) -replacement of remote control -train the system 1. 4 - rearrange the transponder (if there is a clean one) otherwise: - replace 1118 – 6105006 (set) - retrain the system 1. 5 - replace the remote control - train the system 1. 6 - replace the faulty unit - train the system 1. 7 - replace the remote control with a “clean” one - train the system 1. 8 - replace 1118 – 6105006 (set) - rearrange the transponder - rearrange the remote control 2. 1 W‑Line communication line break

2. 2 Malfunction of W‑Line circuits in the APS or ICS units

2. 3 Lack of supply voltage on the APS or KSUD unit

2. 4 The “Normal” electrical package is faulty (the control driver has burned out)

2. 5 KSUD does not contact

2. 1 - restore the circuit between unit No. 18 of the APS ECU and unit No. 71 of the KSUD 2. 2 - replace the faulty unit - train the system 2. 3 - eliminate the cause 2. 4 - replace the electrical package - retrain the system 2. 5 - eliminate the leak - replace the control valve - retrain the system

The read key code is not in the APS 3 memory. 1 - retrain the system 3. 2 - replace the KSUD - replace 1118 – 6105006 (set) - replace the remote control - train the system

The code of the read key is not in memory Revealed during pre-production preparation 4 beeps IC flashes The ECCS was previously trained with another system - train the system

Where is the Priora comfort block located?

To gain access to the product, you will need to unscrew the protective plastic walls of the car's center console. They are located on the left side of the front passenger seat and on the right of the gas pedal, on the driver's side. The device itself is located above the control unit. In order to remove the device you will need a 10 mm wrench and a Phillips screwdriver.

Pinout of the Priora comfort block

The main, important elements of the device are:

1. The so-called control drivers. Each driver is responsible for a set of specific functions.
2. Transponder receiver.
3. Relay control.
4. Transceiver. Communicates with the module installed in the door.
5. 2 connectors. The first is responsible for supplying power, the second for transmitting the necessary technical information.

Click to enlarge
To ensure proper operation of all elements connected to the comfort unit connectors, it is necessary to study the correct pinout (numbered diagram for connecting wires to contacts). The design of the comfort block for the Priora, when studied in detail, is not particularly difficult.