Wheels for Lada Vesta Cross: choice, size, bolt pattern

Wheels on LADA Vesta Cross are not so subject to replacement by car owners. Vesta is presented as a family car, from which good handling and cross-country ability are expected. Since this model is still young in the Lada line, changing discs on it is quite a rare occurrence.

AvtoVAZ equips Vesta with wheels ranging from R15 to R17, depending on the configuration. These discs are quite high quality and will undoubtedly last a long time. Their appearance also cannot be called unsatisfactory, since the alloy wheels on it are installed in the factory version and have a good design that perfectly complements the massive appearance of the car itself.

Lada Vesta SV Cross is produced with two different engine sizes. The power unit with a volume of 1.6 liters is less powerful; the second - with a volume of 1.8 liters, which increases the acceleration dynamics and the overall speed of the car.

Cars with different engines have slightly different wheels, which ensures overall suspension strength. After all, the workload of all car systems, from the engine to the brake system, depends on the discs.

Parameters of standard bolts

A distinctive feature of this car is the use of bolts rather than studs with wheel fixing nuts. Sometimes it happens that standard fasteners need to be replaced for some reason. In this case, before purchasing, you need to familiarize yourself with the characteristics of the bolts. Otherwise, serious trouble may arise.

For example, bolts with an inappropriate taper can cause spontaneous unscrewing. As a result, the disk can become disconnected while driving. Which threatens a serious accident. As a result, it is advisable to avoid such situations. Choose the right bolts and tighten them well. Standard parameters of standard elements:

• cone inclination angle, degrees – 60;
• edge width, mm – 17;
• thread length, mm – 28 mm;
• thread pitch, mm – 1.1 mm;
• total length, mm – 56 mm.

The cost of 1 bolt can range from 150 to 250 rubles - this applies to original ones. There is also a wide selection of different analogues on sale. Before purchasing such products, it is advisable to familiarize yourself with all their characteristics. It is also advisable to study reviews. Only then purchase.

Some drivers opt for sets with secret locks. These are found on sale quite often. When using new bolts, it is advisable to lubricate the threads with a special graphite lubricant. This will avoid souring and prevent various problems and difficulties.

It is also important to carefully monitor the secret key

Wheel rollers for LadaVestaCross – review of prices and manufacturers

It is better to purchase rollers in special online stores, study the manufacturers and reviews about them in advance. You should not give preference to the cheapest options - the low price will affect the quality of the filter, service life and appearance.

The optimal options are presented in the table:

*prices are current as of September 27, 2018

Frame design.

Based on the carcass design, tires are divided into two types:

1. Diagonal - the cords in the tire are located diagonally from bead to bead. The need to cross threads in two adjacent layers leads to the fact that the number of layers is always even (2,4, 6 or 8);
2. Radial - cord threads are located meridionally (radially) along the tire from bead to bead. In this case, there can be an odd number of layers.

Bias and radial tires have both their advantages and disadvantages. For example, diagonal ones are simpler in design and cost less, while radial ones have higher performance characteristics, efficient heat dissipation due to fewer layers (can be recognized by the markings on the sidewall), and better grip on the road surface.

Currently, bias-ply tires for passenger cars are practically not produced and are found only on trucks, but they can still be purchased.

What wheels can be installed on Vesta

What wheels does the automaker propose to install on the Lada Vesta? AvtoVAZ does not recommend changing the tire size or offset, suggesting that only wheels with increased or reduced width be used.

Wheels with a diameter of 15 inches can be installed in widths from 5 to 6.5 inches (remember, the base has 6 inches). And wheels with a diameter of 16 inches can be from 5.5 to 6.5 inches wide (the base is 6.5 inches). The same applies to 17-inch wheels on the Vesta Cross or wheels on the sports Vesta - if you wish, you can install narrower wheels, 5.5 and 6 inches wide, without violating the requirements and warranty policy of the automaker.

As for tires, AvtoVAZ allows the use of tires with other speed and load capacity indices. Standard 185/65R15 88H tires can be replaced with tires with load capacity index T. And 16-inch tires 195/55R16 91H can be with speed index 87 and/or load index T. Wheels on the Lada Vesta Cross size 205/50R17 89V can be replaced tires with a lower load index H.

What non-standard wheels will fit on the Lada Vesta

Although most car owners tend to enlarge their wheels to improve the appearance of the car, sometimes the opposite happens. For example, it is common practice to drive on larger diameter alloy wheels in the summer, and then take smaller wheels and a larger tire in the winter to make the car more controllable and softer on snowy roads. The best option for such a replacement is to install 185/65R15 wheels from the basic configuration. It is not recommended to install wheels smaller than 15th diameter, and we have not seen examples of such a replacement.

Vesta on 19-inch wheels

As for the maximum diameter, the critical height of the wheel assembly for Vesta is 660 millimeters. Therefore, not only the original 17-inch wheels are installed on the car, but also wheels with tires with a diameter of 18 inches. In this case, the tires should be no larger than 225/45 R18, and for some car owners they already cling a little to the wheel arch liners. True, on drive2 there is a case with installing 19-inch wheels, but this will require improvements in the suspension design. And in the case of installing 18-inch wheels, some tire sizes also allow you to lower the car, which many do. In any case, when choosing wheels and tires, you will need a calculator. Just sit down and calculate whether your purchase will fit into the wheel arches or not. Or look at our table below.

Is it possible to reduce the offset and install wider wheels? Do not forget that the manufacturer already recommends installing 17-diameter tires on 6.5-inch wide wheels with an offset of 43. That is, there are not many options here. The maximum permissible width of wheels on a Vesta is 8 inches with an offset of 38. In this arrangement, the wheels practically do not stick out and do not touch the arches. Anything more requires modification of the machine design. By the way, don’t forget that a smaller offset reduces the life of your wheel bearings. So you will have to either change it more often, or buy more expensive parts.

We also remind you that any replacement of wheels with non-standard sizes has advantages and disadvantages. By installing larger tires and wheels you will definitely improve the appearance of your car, its dynamics and stability. But you will have to pay for this with less comfort on bad roads and a possible increase in fuel consumption

In the case of low profile tires, which will most likely have to be placed on large rims, you will also have to get used to constantly monitoring the tire pressure, because the tires are more sensitive to this important parameter, as well as to shaking on uneven roads

Alternative wheel options for Lada Vesta are in the table.

What tires does AvtoVAZ recommend installing according to operating rules?

Each car manufacturer will force owners to use only those sizes that are specified in the operating rules. Based on these dimensions, the car can be considered safe on the road.

Using these characteristics, the machine underwent certification and safety tests. The manufacturer is not responsible for changing wheels.

Bright wheels on the Lada Vesta Cross

The combination of contrasting colors in cars is gaining popularity every day, so rollers are now available in various colors.

Here are some recommendations from designers for Lada Vesta Cross owners:

• If you have a white car, it would be optimal to play on the contrast by installing black rollers, cast ones at that, they will perfectly distinguish the car from the crowd;
• For a black car, you can choose a part in the same way - based on contrast - and give preference to white;
• Classic silver cast rollers will match almost any body color - this is a universal option;
• On a red car, a rim edged in bright red will look great.

How to choose cast products

The car is equipped with such wheels from the factory, or you can purchase them yourself. The widespread use of casting is associated with the relative low cost of production and the ability to create products of any shape and design.

Factory alloy wheels for Lada Vesta Cross SW

Alloy wheels purchased independently must meet all recommended parameters and characteristics. The maximum permissible radius, which is R17, should not be exceeded.

In terms of prevalence, die-cast products represent 70 percent of the total market. They have less weight than stamped steel and improved characteristics. By purchasing cast wheels, you can improve the factory settings of the car, get better dynamics, handling and smoothness.

How to choose the right winter tires for Lada Vesta SW Cross

On a note!

Not every tire will have ideal grip properties on slippery surfaces in the winter. If the car enthusiast follows the recommendations below, then he will not have any problems when operating the vehicle:

• If the driver drives his Lada exclusively in the city, then the all-season M + S version with hard treads that will not wear out quickly during sharp braking or when turning on asphalt surfaces will suit him.
• When the vehicle is operated on country roads, or in the region where the driver lives, the air temperature often drops below -10 degrees Celsius, then it is simply impossible to do without full-fledged winter tires. And it’s even better if it is equipped with multi-directional metal spikes, which will ensure the stability of the car during acceleration, braking and cornering.
• If the car is planned to be used on rough terrain with completely snowy roads, then a studded tire will be unnecessary, because the studs play virtually no role in traction, and the main function is taken over by the soft tread. Thus, a car enthusiast should purchase a friction tire, the surface of which is cut into numerous lamellas with sharp edges.

Friction tires on Lada Vesta SW Cross These elements, when pressed on them under the weight of the car, move apart, forming dozens of cracks, into each of which snow mass falls, lingering there for a certain time.
When the wheel rotates, the traction surface increases significantly, which provides additional frictional force that pushes the car forward without slipping.

If excess moisture forms under the wheels (for example, at zero temperature outside the window, when the snow turns into mush), then it is effectively removed through special grooves for collecting water between the blocks of lamellas.

When choosing wheels, a car enthusiast can turn not only to companies that are authorized brands of the concern, but also to other brands whose products are adapted for normal use in the middle zone. This means that the chemical composition of the rubber must be selected in such a way that the protectors do not harden even at extremely low temperatures.

You may be interested in Kumho - tire manufacturer

It is advisable to select tires that contain admixtures of silicate materials and create an abrasive surface during wear. The most popular brands for Russian car enthusiasts are Nokian, Bridgestone, Pirelli, Michelin, Amtel, Viatti and some other companies that are widespread in the Russian Federation.

Important!

Before choosing a particular tire brand, a car enthusiast needs to verify their authenticity by checking the technical specifications on the tire manufacturer’s website with the data at the retail outlet.

Studded tires for Lada Vesta SW Cross

Installing larger diameter discs

Large rims not only change the appearance of the car, but also affect its dynamics, maneuverability, and stability on the highway, and not always for the better.

When deciding on their installation, you should know the basic principle - the larger the diameter of the disk, the lower the height of the tire profile, because the size of the outer diameter of the wheel is tied to the size of the wheel arch - when turning, the tire should not touch or rest against anything at all steering wheel rotation range.

Testing the Lada Vesta over the course of a year showed acceptable wheel size options:

17-inch wheels were installed on the Concept version of the Lada Vesta. Technically, this sedan can also be equipped with R18 wheels, but the outer diameter of this wheel (669 mm), as well as the tire width (235 mm), differ significantly from the factory values ​​and cannot be considered in the real conditions of Russian roads due to the too low profile as practical - defects in the road surface will quickly damage both tires and wheels, the price of which, due to their size, is several times higher than the cost of standard ones.

The effect of large-diameter wheels and low-profile tires on a car

• increasing the style of the car and the effectiveness of the exterior;
• improvement of driving qualities - dynamics, road stability, steering sensitivity;
• better “absorption” of potholes compared to a smaller radius;
• with a tire profile from 55 – increased durability of the suspension;
• reducing the braking distance;
• increasing the efficiency of ABS and ESP.

• uncomfortable driving due to sensitivity to road surface defects;
• restriction of use on roads with defective surfaces;
• the need for increased pressure control;
• greater need for kinetic energy at the start - higher fuel consumption;
• higher cost.

Low profile tire pressure

This parameter, ignored by novice car enthusiasts, is very important when operating cars with any tires, and especially with low-profile ones. The required tire pressure is always indicated by the vehicle manufacturer in the operating instructions and in an accessible place on the body, for the Lada Vesta - on the B pillar on the driver's side.

Low profile tires require increased attention to pressure, as insufficient pressure will make the wheels and suspension even more vulnerable to potholes and rocks on the road.

As many years of experience have shown, the pressure in low-profile tires must be maintained 15% higher than that specified by the manufacturer for wheels of the recommended size.

Alloy wheels and their parameters - everything you need to know

When purchasing 15, 16 or 17 inch wheels for your car, don’t expect them to last forever - they won’t. In time, the question of replacement will arise. Russian roads force even expensive wheels to break quickly. Some drivers are not satisfied with the parameters of the wheels or tires, so they change them.

If the time for replacement has come, many parameters must be taken into account. These are wheel size, rim type, rim offset (ET), wheel bolt pattern, diameter and other parameters. Products with the following technical data are suitable:

• casting with wheel size 175/70/R16 or 205/60/R16;
• alloy wheels 175/55/R17 and 195/50/R;
• for the Lada Vesta SV Cross station wagon, 18-inch wheels are needed;
• tires are used exclusively on 16 and 17 inches.

AvtoVAZ uses a number of wheels produced by K&K. If you take them, drilling, bolt patterns and other parameters will converge. A good option would be to install r16 and 17 Phoenix wheels.

The plant recommends choosing narrow winter tires for the Lada Vesta. This is necessary to increase stability when driving on slippery roads in sub-zero conditions.

Before purchasing wheels, pay attention to the bolt pattern. On the Lada Vesta it has changed somewhat; not all wheels will be compatible with it. The rims are secured with 4 bolts, the diameter of the mounting holes is 100 mm. The wheels of Korean cars have similar characteristics.

We do not recommend installing wheels with a significantly larger diameter. This will make driving less comfortable. It will be less resistant to driving on uneven roads.

General background information

Ranges of possible values ​​for tires and wheels Lada Vesta SV Cross 2022.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Lada Vesta SV Cross 2022?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Checklist of advantages of ART Motion tires

1. The car gains high controllability. Excellent driving characteristics are observed even on wet asphalt. This is achieved thanks to special arc-shaped grooves on the inside of the tire. This is a kind of drainage system for quickly removing water from under the wheel. 2. The outer part of the rubber contains special enlarged relief blocks. They are necessary to increase the stability of the car during drifts. 3. The tread pattern is designed to minimize noise while driving. 4. There are three longitudinal grooves on the tread; they are necessary for the directional stability of the car. 5. Tire pressure levels are maintained for a long time. 6. Due to low rolling resistance, fuel consumption is minimal, and the car accelerates faster. 7. Increased traction with the road is observed. Due to this, the braking distance is minimal and there is no slipping. 8. Despite the high quality, tires cost minimal money.

If you take the most expensive version of the Vesta car, it will have German Continental tires measuring 195/55/R16. This is one of the best solutions on the market today. At the same time, the optimal wheel size for the Lada Vesta is 16 inches.

As a result, the manufacturer equips the Lada Vesta with high-quality cast or stamped wheels. After replacement, it is important to install an equally high-quality option. Let's discuss the remaining opinions in the comments.

Basic characteristics of wheels on the Lada Vesta

Lada Vesta is a domestically produced sedan, which has been produced by the VAZ plant since 2022. A special feature is the Lada Vesta wheel size with parameters R16-R17, in contrast to earlier models, which are characterized by the use of standard sizes R13-R14.

Initially, this model was released on the market with wheels size 185/65/r15. Gradually, the manufacturer decided to switch to wheels on the Lada Vesta of an increased size, reaching 16 - 17 inches. The decision to install wheels of a different size made it possible to significantly increase Vesta’s handling and stability on the road.

Tires and their parameters

Before choosing tires, the driver must understand that the size of car tires very seriously affects various characteristics of the car. Perhaps the grip will improve, the car will stay on the road perfectly at speeds of up to 210 km per hour, others increase the load capacity and speed index. Of course, the manufacturer indicates factory values ​​that are considered optimal for a particular model. On the Internet you can find a list of proven winter tires and similar summer tires for each brand. But how to choose tires? The following parameters need to be taken into account:

• factory recommended tire size is 185/65 R15 and 195/55 R16;
• if the wheels are 15 inches, the tire size is 175/70 R15 and 205/60 R15;
• for 17-inch wheels choose tires 175/55 R17 and 195/50 R17.

The manufacturer puts optimal tires on its Lada Vesta cars. These are Belarusian Belshina tires. They are designed specifically for AvtoVAZ and have high reliability and good quality. If you are puzzled by the choice of winter or summer tires, you can install the products of the Belarusian plant. Tires for Lada Vesta belong to the ART Motion brand, which is of Spanish origin. This means that the quality of the wheels has been tested according to the standards of the country of origin - Spain.

This is confirmed in practice. Wheels have the following advantages:

Controllability criteria

Handling criteria are an important evaluation factor that all manufacturers must comply with when producing cars. The main criteria are included in GOST and are used when testing new models. But ordinary motorists do not need complex calculations. You can understand that your car is handling poorly even during your daily commute to work.

• Sustainability. Russian roads are far from ideal, and there are often large and small potholes along the way. If you accidentally hit one of these holes with your wheel, your car shouldn't veer too far off course. Otherwise, there is a high probability of flying into the adjacent lane, since at high speed the degree of deviation will be greater.
• Turning should be clear and predictable. The entry angle should not differ greatly due to external factors or coating material. On vehicles with good suspension, precise trajectories during bends and turns are possible even at high speeds.
• Road grip. The car must respond quickly and clearly to steering movements in any conditions. Sudden acceleration or braking should also not cause difficulties. The machine should ideally maintain such characteristics on both dry and wet surfaces, as well as during winter.

A car's handling depends on many factors. It’s quite difficult to calculate; after all, you can’t do it with just one equation. Therefore, most drivers prefer to be guided by their own experience. The main criterion for handling is sufficient turning in difficult conditions (high speed, snow or rain).

Additional sizes

Many car enthusiasts install wheels and tires of a different size on their car, for various reasons: it could be repairs after an accident or just a modification. Let's try to understand in more detail the adequate mounting options for non-standard tires and wheels on the Lada Vesta. We will also consider the advantages and disadvantages of this operation, as well as the consequences of possible installations that promise serious losses in the operating parameters of individual components and assemblies (including early breakdowns).

If the car owner simply decided to change the tires on his car (without changing the dimensions), there is nothing wrong with that. But in this case, it is necessary to ensure that all tires contain the same tread, as well as an equal degree of wear (in this case, the tread is allowed to differ only for the front and rear axles).

What wheels were installed on different bodies and configurations?

It's time to look at the two main configurations of the Lada Vesta Cross and understand what the main differences in wheels and tires are.

Lada Vesta Cross 2022 with an engine capacity of 1.6 liters:

• the diameter of the central hole is 60.1 mm;
• type of fastener - bolts;
• the tightening torque is in the range of 89 – 121 Nm;
• Mounting dimensions M12 x 1.5.

Lada Vesta Cross 2022 with an engine capacity of 1.8 liters:

• the diameter of the central hole is 60.1 mm;
• type of fastener - bolts;
• the tightening torque is in the range of 89 – 121 Nm;
• Mounting dimensions M12 x 1.5.

Inexpensive and very popular are models with small wheels in size R15. Despite their attractive appearance, such wheels are not inferior in quality and differ only in their dynamic characteristics. These models can be purchased from official Lada representatives for a fairly reasonable price.

Also, when driving on such wheels with such discs, the driver will notice that the smoothness and comfort of the ride significantly exceeds the large dimensions. The disadvantage of disks of this size is their appearance. Since in the stamped steel version they do not look attractive.

Alloy wheels on the Lada Vesta Cross cost one and a half, and sometimes twice as much as stamped steel ones. But this is due to the fact that such discs are lighter due to the presence of aluminum alloys in them. When driving on such discs, you can notice increased maneuverability and controllability of the car, since the overall weight can drop quite significantly. When installing alloy wheels with a large radius, you should understand that the level of comfort will decrease, but in return the dynamic characteristics will increase.

In the winter season, the best option would be to install R15 wheels, as this will increase the cross-country ability and traction of the wheels with the road surface. For the summer, it is recommended to purchase R16 wheels, since this size is the golden mean between comfort and car handling.

If the Lada Vesta Cross was purchased for a family, then it is worth completely switching to R15 wheels, because this will greatly increase the overall comfort of travel. Another factor to consider is the engine power. After all, the weight of the discs directly affects the acceleration and braking of the car.

18-inch wheels

This wheel size is used in the Lada Vesta “Concept” modification. The total diameter of the wheel is significantly larger than on other modifications and is 668.7 millimeters. The tire size in this case is 235/45/R18. Moreover, replacing them with 17-inch ones will not work.

Using automatic selection of tires and wheels for the Lada Vesta, you can avoid many problems associated with their compatibility and compliance with the recommendations of automakers. This is due to the significant role they play in ensuring a number of performance characteristics of any modern vehicle.

In addition, one cannot fail to note the importance of tires and rims as active safety elements. That is why the choice between them should be made as responsibly as possible, which presupposes having a whole range of knowledge about these products

A car wheel is a necessary part, which, in symbiosis with a tire, is a device that converts external energy into useful work for moving the vehicle. Each car owner should have basic information about this element and know which of them are rationally suitable for the purchased Lada Vesta. Below you will see photographs of the domestic novelty on different wheels. Wheels on Lada Vesta are divided into two types:

• The first type includes cast wheels, which are manufactured by casting into a mold of a certain diameter. The materials for creation are often: aluminum, magnesium, and also, in rare cases, titanium alloys. After the casting process, a heat treatment session is necessary. The final appearance of the discs is obtained after mechanical cleaning and the painting process. The cost of such parts is the most optimal.
• Stamped discs represent the second type. They are made from steel sheets of ST-3 format. The two halves with holes are welded and become whole. Straightened using a sledgehammer or on a specialized machine. Such a part has a lot of weight, but easily gives in to resistance and pressure. The main disadvantages will be susceptibility to corrosion and poor balancing, which can lead to unpleasant consequences when driving at high speed.

Factory alloy wheels

At the factory, alloy wheels are installed on luxury trim levels. If you have seen a Lada Vesta in the photo with 15 alloy wheels, it means that the driver of the car installed them himself, or it is a luxury one. Typically, the manufacturer installs products from the Russian company K&K. It is a leading manufacturer of die-cast wheels. He has been making rims for over 20 years since '91. Kik has reliable equipment. The company provides a substantial warranty on the wheels. The Lada Vesta in the photo on 16-inch alloy wheels looks beautiful and stylish. It is not equipped with alloy wheels, you can pay extra for them.

Lada Vesta is equipped with high-quality factory wheels. They have practical performance characteristics and most buyers do not change them for many years. But some people see the Lada Vesta in the photo on 17-inch alloy wheels and want to install these for themselves. Be aware that then you will have to install low-profile tires, the ride will become less comfortable. But the solution has advantages, discussed earlier.