Where are the body and engine numbers on the VAZ 2110

It is necessary to know where the engine number is located on a VAZ 2110 vehicle. For example, when a car owner wants to buy a new engine, the engine number will help him choose exactly the model his car needs. When buying/selling a vehicle, you also need to know the engine number so as not to mislead the buyer. Many experienced car enthusiasts refuse to buy a car if there is no coding where it is usually located.

Let's consider the most important issues related to the coding of the VAZ 2110 engine.

Vehicle identification numbers

Location of identification numbers in the engine compartment:

1 — vehicle identification number; 2 - summary plate with vehicle nameplate data; 3 — engine number (at the end of the cylinder block under the thermostat housing)

According to existing legislation, each vehicle has a unique identification number (VIN code).

This number is recorded in
the vehicle passport
(PTS). The identification number and other passport data of the vehicle are indicated in the summary plate.

An identification number

stamped on the body in two places: in the engine compartment on the amplifier (support cup) of the right mudguard.

. and on the luggage compartment floor reinforcement next to the spare wheel mounting bracket.

Summary plate:

1 — number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 — vehicle type approval number; 3 — identification number (XTA — manufacturer code; 211240 — car model; 6 — year of manufacture; last seven digits — body number); 4 — engine model; 5 — load on the front axle; 6 — load on the rear axle; 7 — codes of vehicle version and configuration; 8 - total permissible weight of the vehicle with trailer; 9 - total permissible vehicle weight

Note. The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see Table 1.1).

The engine number is stamped on the end of the cylinder block above the clutch housing (under the thermostat housing).

To read the number you must remove the air filter housing.

Source

Vehicle identification number (VIN) GAZ 2705, 33021 Gazelle from 1994 to 2002, and from 2003

2.1. Vehicle identification number (VIN)

There are two options for applying VIN on cars. On vans with an all-metal body:

• 1st option - on the outer front panel under the hood on the right side in the direction of travel of the car (Fig. 1.1, view along arrow “A”);
• 2nd option - on the gutter above the opening of the right sliding door of the body (Fig. 1.2).

• 1st option - on the outer front panel under the hood on the right side in the direction of travel of the car (Fig. 1.1, view along arrow “A”);
• 2nd option - in two places: on the gutter above the opening of the right sliding door of the body (Fig. 1.2) and on the rear roof rail on the right side in the direction of travel of the car (Fig. 1.3).

An example of applying a car VIN: *ХТН270500(40140794*, where:

• XTN - international manufacturer identification code;
• 2705 ​​— vehicle index;
• 4 - model year code (4 - 2004, 5 - 2005);
• 0140794 - vehicle serial number.

- a period equal to an average calendar year during which cars with the same design features are produced.

Vehicle body identification number

is applied under the hood on the outer front panel on the left side in the direction of travel of the car (Fig. 1.1, view along arrow “B”) Example of applying a body number: *27050040100125*, where:

• 270500 — body index;
• 4 — model year code;
• 0100125 — serial number of the body.

Identification number of ZMZ engines

stamped on the cylinder block on the left side (Fig. 1.4).

Cylinder block identification number

stamped above the engine identification number (ZMZ-4061, ZMZ-4063) or on an inclined platform formed by the tide under the oil filter mounting flange (ZMZ-4025, ZMZ-4026).

Identification number of UMZ-4215 engines

stamped on the cylinder block on the left side. An example of applying the engine identification number: * 4215СР * 40901271 *, where:

• 4215СР — engine index;
• 4 - g.v. code;
• 0901271 - engine serial number.

The engine configuration option is indicated by an alphanumeric code (the last two digits of the engine index). The vehicle's passport data is also indicated on the nameplate (Fig. 1.5), located on the rear pillar of the right side of the cab.

Vehicle identification numbers

Location of identification numbers in the engine compartment:

1 — vehicle identification number; 2 - summary plate with vehicle nameplate data; 3 — engine number (at the end of the cylinder block under the thermostat housing)

According to existing legislation, each vehicle has an identification number (VIN code).

This number is recorded in
the vehicle passport (PTS).
The identification number and other passport data of the vehicle are indicated in the summary plate.

Summary plate:

1 — number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 — vehicle type approval number; 3 — identification number (XTA — manufacturer code; 211240 — car model; 6 — year of manufacture; last seven digits — body number); 4 — engine model; 5 — load on the front axle; 6 — load on the rear axle; 7 — codes of vehicle version and configuration; 8 - total permissible weight of the vehicle; 9 - total permissible weight of the vehicle with trailer.

Note. The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see Table 1.1).

Table 1.1. Symbols for the year of manufacture

An identification number

stamped on the body in two places: in the engine compartment on the amplifier (support cup) of the right mudguard.

. and on the luggage compartment floor reinforcement next to the spare wheel mounting bracket.

The engine number is stamped on the end of the cylinder block above the clutch housing (under the thermostat housing).

To read the number, you must remove the air filter housing.

Note. The model year may not be the same as the calendar year.

Source

Identification numbers of cars of the VAZ-2110 family.

Identification numbers of cars of the VAZ-2110 family.

The vehicle identification number (VIN) is stamped on the right cup of the telescopic strut support.

Also stamped on the luggage compartment floor reinforcement (number shown by arrow, spare wheel removed).

Vehicle data is given on the plate attached to the right cup of the telescopic strut support.

The engine number is stamped on the cylinder block above the flywheel (for clarity, the gearbox has been removed).

An example of car data designation.

XTA – manufacturer code; 211040 – car model; 5 – model year of the car (here – 2005); 0819624 – body number; 21124 – engine model; 1515 kg – permissible weight of the car with trailer; 1-780 kg – load on the front axle (780 kg); 2-780 kg – load on the rear axle (780 kg); 0810206 – number for spare parts; Н02 – execution option; 011 – modification.

Source

Where is the VIN number of VAZ 2110

The VIN code is stamped in two places on the car body:

• telescopic stand, on the right side;
• at the bottom of the trunk (will be visible after the spare tire is removed).

You can also see a table with general data based on the technical characteristics and production data of the vehicle.

The engine number on a VAZ-2110 car is stamped on the cylinders of the unit, where the transmission is located, directly above the flywheel. This is a standard option, regardless of the technical design of the vehicle. Registration of a car is possible only with the indication of the VIN code, since it is unique and must be stamped in a certain part of the car and recorded in the technical passport.

It should be noted that the VIN code is stamped on the car body in two places at once, and it must be saved in a readable form. In order to find out where the engine number is stamped on a VAZ 2110, you will need to remove the air filter, since the numbers are initially covered by the thermostat of the power unit.

Status of the people's car

Since 1996, when mass production of VAZ 2110 cars began, they have received a lot of criticism from car owners. The body of the car also received a lot of negative nicknames, including the pregnant antelope, received for its unusual shape of the constituent elements, plump in the middle and angular in the front and back, as well as the matryoshka doll, which occurs due to quite noticeable mismatches of some body elements.

However, neither criticism nor offensive nicknames prevented the VAZ 2110 from gaining great popularity; it became a truly people's car. Even new models could not eclipse this popularity.

Since 2007, the VAZ 2110 car has been out of production, but in Ukraine, in the city of Cherkassy, ​​they produce the Bogdan car, the body of which, although it has a different emblem, but everyone can see that this is the same ten, loved by many car enthusiasts.

Did you like the article? Was she helpful? Not really

Body on the VAZ 2107: structure, diagram, change

The VAZ 2107 has long become a legend of the Russian automobile industry. Everyone is familiar with its famous body of traditional color with ordinary geometry. Being a luxury version of the VAZ 2105, it was produced from 1982 to 2012 in several modifications and had different configurations, including a pickup body.

General principles of decoding

Knowing where the body number for the VAZ 2110 is located, you must also take into account the specified information:

• code information about the automobile plant where the car was produced;
• VAZ model;
• the year the vehicle was produced;
• car body number;
• the model of the power unit, and the technical parameters of the domestic car directly depend on it;
• weight that is allowed according to the maximum indicator;
• permissible weight of the vehicle with trailer;
• the load that is allowed on the axles used (indicated separately, since the permissible value will be different);
• numbers of spare parts that were originally installed;
• vehicle version;
• modification option.

The model year of the vehicle is indicated by a number or a Latin letter. The above information must be indicated in the certificate issued for the VAZ 2110.

Until 1982, the VIN code consisted of 11-15 characters, but currently it necessarily includes 17. Separating signs are usually embossed in the form of 5-pointed stars. Moreover, each sign must be up to 10 millimeters high and they are placed between two stars. On VAZ-2110 cars, the VIN code must be applied using the impact method to preserve the readability of information for a long time.

Taking into account the location of the body number, engine, VIN code on the VAZ 2110, experienced drivers can quickly find out complete information about the vehicle.

Body and its constituent elements

Body The VAZ-2110 car has a monocoque four-door sedan-type body, consisting of a frame and attachments. The body frame consists of a base, roof, sidewall and individual frame parts connected to each other. The frame is a non-separable structure, which is designed in such a way that its rigidity and strength ensure the ability to carry all the components and assemblies of the car. Various attachments are attached to the body frame. To ensure reliability and functionality, various methods of attaching these elements to the frame are used:

• The doors, hood, and trunk lid are secured using hinges;
• The front fenders, rear and front buffers, and radiator trim are secured with bolts;
• The windshield, rear and side windows are attached to an adhesive base.

To ensure safety, the windshield is made of special glass, which consists of three layers and is known as Triplex.

The front and rear doors have deflectors with valves installed at the ends. They are necessary to ensure ventilation of the cabin.

The VAZ 2110 has towing eyes in the front and rear of the body.

Technical information

dimensions

Engine compartment layout

1. Adsorber.
2. Generator.
3. Decorative engine cover.
4. Intake manifold (on engine 21124 the intake manifold is plastic).
5. Throttle valve assembly.
6. Brake system reservoir.
7. Cooling system expansion tank.
8. Washer reservoir.
9. Accumulator battery.
10. Air filter.

Identification information

The vehicle identification plate is located under the hood on the suspension strut shell on the front passenger side.

identification plate:

1. Identification plate:
2. Number for ordering spare parts.
3. Manufacturer.
4. Engine model.
5. Execution option.
6. Equipment option.
7. Rear axle load.
8. Front axle load.
9. Permitted maximum weight of the vehicle with trailer.
10. Permitted maximum vehicle weight.
11. An identification number.

The vehicle identification number is a combination of seventeen alphanumeric characters (for example: XTA21103020528829), which are deciphered as follows:

• The first three letters (XTA) are the manufacturer's index. The first symbol is the geographical area (X – Europe); the second is the country (T – Russia); the third is the manufacturing plant (A – JSC AVTOVAZ).
• The next six digits (211030) are the car model.
• A letter of the Latin alphabet or a number (2) is the code of the model year of the car.

• The last seven digits (0528829) are the body number.

The body identification number is stamped under the hood on the strut cup on the front passenger side.

Note

: The body identification number is duplicated on the floor of the luggage compartment next to the spare wheel mounting bracket.

The engine number is stamped on the end of the cylinder block under the thermostat housing. In order to read it, you need to remove the air filter or use a mirror.

Note

: For clarity, the engine has been removed.

Source

Where is the VIN number for the VAZ 2110

Location of identification numbers in the engine compartment: 1 – vehicle identification number; 2 – summary plate with the vehicle’s passport data; 3 – engine number (at the end of the cylinder block under the thermostat housing)

According to existing legislation, each vehicle has an identification number (VIN code).

This number is recorded in the vehicle passport (PTS).

The identification number and other passport data of the vehicle are indicated in the summary plate.

Summary plate: 1 – number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 – vehicle type approval number; 3 – identification number (XTA – manufacturer code; 211240 – car model; 6 – year of manufacture; last seven digits – body number); 4 – engine model; 5 – load on the front axle; 6 – load on the rear axle; 7 – codes of vehicle version and configuration; 8 – total permissible vehicle weight; 9 – total permissible weight of the vehicle with trailer.

The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see Table 1.1).

Table 1.1. Symbols for the year of manufacture

Where is the VAZ-2112 16 valve engine number: photo, video

Car: VAZ-2112. Asked by: Denisov Roman. The essence of the question: Where can I find the engine number for a VAZ-2112?

Good afternoon I have the following question: where is the engine number on the VAZ-2112? I want to buy a car second hand and I want to check all the data with the documents. Please tell me!

Location of the engine number on the VAZ-2112

It happens that unknowing car enthusiasts are able to spend more than one hour under the hood of a car looking for the required identification number. The thing is that during operation, some of them can become covered with a thick layer of dirt, which makes them simply unsuitable for visual perception without prior preparation.

The following two tabs change content below.

Layout of identification numbers under the hood

The photo below shows schematically where all the identification numbers are located under the hood.

The numbers indicate the location of the ID numbers.

1. The car number marking (VIN code) is located here.
2. Under the number two, all the installation passport data.
3. The engine number is located under the thermostat housing, on the cylinder block. For convenience, you will have to move the air filter housing to the side.

In order to check the engine number, you need to have a wire brush and WD-40 on hand in advance to make it easier to read dirty or corroded symbols.

VIN code

The vehicle identification number, in addition to being on the support cup under the hood, is also stamped in the niche for the spare wheel in the trunk. As a rule, they are always readable after a little cleaning with a rag.

Engine number on 16 valve

We have already written more about the engine diagram here!

They changed the thermostat and checked the engine number!

The same cannot be said about the engine number, since its location is subject to constant exposure to road salt, reagents and high moisture. To make it easier to clean and read this number, you need to remove the air filter housing with the corrugation and you will see 2 rows of numbers on the block.

Clean numbers are much easier to read.

The top row indicates the engine model, and the bottom row directly indicates its number.

Engine number on 8 valve

Engine number VAZ 2112

Finding a table with engine data designation often requires a lot of time and effort for novice car enthusiasts. This is due to the fact that the metal is covered with a thick layer of dirt or changes under the influence of corrosion. Constant exposure to external factors is considered dangerous, because they lead to corrosion of the metal used or serious contamination. Visual perception of the number becomes impossible without prior preparation. It is often necessary to pre-clean the table.

Advice! Usually, cleaning measures are carried out before checking. To do this, use a metal brush and a special cleaning agent. After the preliminary procedure, it becomes easier to read the symbols to resolve vehicle-related issues.

The engine number on a VAZ 2112 can be seen after removing the air filter of the power unit. Two rows of digital designations (model and serial number) are traditionally stamped on the unit block.

VAZ 2111 where is the body number on

Dear visitors of the “Cars” website! We will be very grateful for your comments on the video clip “VAZ 2111 where is the body number located on”; registration is not required for this. We also ask you to let us know if you have any problems playing the video.

Thanks for the answer. Now I’ll start putting the car in order. The Milky Way is a beautiful color. 

Thanks for the review, special respect for the roll bars, otherwise everything is ok on the body, and now I’ll paint the ugly bars with a sponge too. What engine do you have? And how to raise your butt like yours? 

28.11.2017 – 09:20 Alexey Pervomaisky

11/18/2017 – 14:48 Vladimir Ilyin

It’s the frameless ones that scratch, with their ends, where the plastic mask is located. And frame ones DO NOT scratch. 

08.11.2017 – 00:24 Vladimir Ilyin

10/18/2017 – 08:08 Vladimir Ilyin

The roof rails do not rust, they are aluminum. The paint is just peeling off. Aluminum falls apart from salt. 

09/19/2017 – 05:24 Vladimir Ilyin

I pour the waste into the doors and thresholds. and nothing rusts. I do this in the fall, before winter. Can you tell me how to remove the plastic plate from the back door where the wiper sticks out? 

Body replacement

The VAZ 2107 in car or pickup bodies has not been produced for a couple of years, but drivers still have variations as they need to purchase bodies for their own cars. If you are involved in an accident, or the body of your car is in disrepair, you can easily order a new one.

The scheme of actions is ordinary. At the beginning, you will need to decide on the required equipment, as well as what type of body is needed.

One package includes a new “body assembly”, which includes electrical appliances, wiring, glass, front and rear bumpers;

The other configuration is called “body in metal”. A new body, painted in a suitable color and treated with anti-corrosion products, comes there.

The factory provided various colors for the VAZ 2107 car. They have their own title. For example, pale yellow is “melon”, traditional reddish is “viburnum”, and marsh greenish is “Sochi”.

When ordering a body in the third configuration, you need to make it in any color. Maybe it will take more than just time than if you stuck with regular snow-white paint. However, a car with a catchy, noticeable color will always be a pleasure to drive.

Location of VAZ 2112 engine number

The following tables are located in the engine compartment:

At the legislative level, it is determined that the VIN of the VAZ 2112 is basic information.

Fact! The VIN code is recorded in the vehicle passport. The code combination is stamped in the engine compartment on the mudguard amplifier. They are looking for her on the right side.

VIN is deciphered as follows:

• initially there are three - the index of the automobile manufacturer: continent of production (X - Europe), country (T - Russia), automobile is encrypted in the letter A);
• the next six digits are the car model (in this case, VAZ 2112);
• then comes a Latin letter symbolizing the model year of the vehicle;
• the last digits are a symbol of the car body number.

The summary plate is also important. It encrypts basic information about the released VAZ 2112:

• number for spare parts (the number corresponds to the serial number of the vehicle produced);
• vehicle approval data;
• identification code;
• model of the installed engine;
• permissible axle load: front and rear (indicated separately in the appropriate order);
• technical version and equipment used for the vehicle;
• weight of the vehicle with an installed trailer, permitted by technical parameters;
• the weight of the vehicle that is permitted for safe movement.

The model year of a vehicle is indicated by numbers and Latin letters. In other cases, there is a direct connection of numbers and letters to the corresponding information.

Innovations in production

To begin with, I would like to draw your attention to the fact that the body of the VAZ 2110 car is a completely domestic development, and this is not entirely typical for the Soviet automobile industry. The body of the new VAZ 2110 car has adopted the best technical solutions from its prototype. Unlike the eight, the body has become more complex, although the total number of parts has decreased, and the number of welding points has increased by 10% to 478. The desire to improve aerodynamic properties forced the manufacturer to complicate the shape of many parts. This, in turn, led to an increase in the number of stamped parts. The project for the production of a new body was accompanied by a complete renovation of the entire production line; new stamping presses, welding stations, special washing machines and other units were installed. This update had a positive effect on the quality of parts manufacturing.

The VAZ 2110 body is distinguished by the number of galvanized parts. The volume of galvanized steel used in the production of the body reaches 52% of its weight.

Robotic technology has begun to be actively used in production for welding galvanized parts.

Factory treatment of internal surfaces and areas hazardous to corrosion with special protective preparations, which, in combination with high-quality paints and varnishes, guarantees anti-corrosion resistance for at least 6 years. It is worth remembering our car owners, because they themselves pay special attention to the car body: they tint, clean, and treat with anti-corrosion compounds.

Where is the VAZ-2114 8 valve engine number: photo and video

Car: VAZ-2114. Asked by: Ivan Smirnov. The essence of the question: How to check the engine number?

Hello! Please tell me where to find the engine number on a VAZ-2114 engine? I’m planning to buy myself a car and want to know if it’s necessary to check it, because I think it’s not necessary, anyway, there’s no way to interrupt it, but my friends advise the exact opposite! I would like to hear independent commentary and advice on this matter.

The need to verify the number

The arrow indicates where to look for the engine number

Whenever you buy a car, you need to check the engine number with what is on the documents. This applies to both registration and deregistration of the vehicle. Below, we will tell you where to find the engine number on a VAZ-2114 car.

The following two tabs change content below.

The need to check the engine and body numbers, without exception, on any vehicle is primarily due to the fact that you do not purchase a stolen car.

Further, difficulties may arise if the engine is no longer original. It could have been changed, for example, removed from disassembly. And during verification, unnecessary problems will arise.

All numbers and letters indicated on the unit must completely coincide with those in the documents, excluding cases of correction. It is also necessary to pay attention to their integrity, that is, they should not have any mechanical damage.

Where can I look up the engine number on a VAZ-2114?

In total, there is one place on the car where the engine number is stamped - it is on the cylinder block on the right side, next to the thermostat, right above the clutch housing.

The engine number is clearly visible once you reach it.

The location of the number is indicated by an arrow.

Please note that in order to see it, you may need to dismantle the air filter housing, along with the pipes.

Information plate

The number is duplicated on the information plate on the right side of the front pillar, along with the engine body number, which is stamped below the spare wheel and the front pillar on the right.

Identification plate under the hood

The sign is marked with a red marker.

The above plate is intended to inform the owner about all the information about the car: year of manufacture, manufacturer, etc. As in the case of the engine and body number, pay attention to the integrity of this plate, the absence of damage or chips on it. It itself should be smooth, and have intact rivets holding it in place.

If there are traces of rust on it, then it is best to clean it so that this does not subsequently affect the general condition of the information materials.

What to do if the number is interrupted

If there is a suspicion that the motor symbols are broken, then it is recommended to refuse to purchase such a machine. It is possible that she may be stolen.

If the car owner has already bought the car and only found out during registration that the number has been changed, then nothing can be done about it. You should sell the car for parts. Since the MREO employees will no longer hand over the documents. But it is prohibited to drive such a car, and it is prohibited to sell it assembled.

If only the engine number is interrupted, then it may be possible to come to an agreement and buy a new engine. But only if the car is not listed as stolen. This rarely happens.

Where is the Engine Number on the VAZ 2110

Where is the engine number for the VAZ-2112 with 16 valves?

Car : VAZ-2112. asks . The essence of the question : Where can I find the engine number for a VAZ-2112?

Hello! I had this question, but where is the engine number on the VAZ-2112? I want to buy a car with my own hands and I want to compare all the data with the documents. Tell me please!

Location of the engine number on the VAZ-2112

It happens that uninitiated motorists can spend more than an hour under the hood of a car searching for the necessary identification number. And the fact is that during the operation, some of them may be covered with a thick layer of dirt, which makes them simply unsuitable for visual perception without preparation.

Subtleties of body repair

Body repairs are most often carried out after an accident, but also if some parts are rusty. But you should still try to avoid welding and other work that involves thermal heating of the metal.

Small scratches and chips can become a source of corrosion in the future. In order to avoid this, it is best to tint small defects. Details: https://vazweb.ru/desyatka/obschee/kak-podkrasit-skolyi-na-mashine-samomu.html

If possible, try not to remove bezels. This can also lead to changes in body geometry. And after any repair work related to the body, be sure to check its linear dimensions.

where is the VAZ engine number 2110-2111-2112-2109, etc.

Problems and malfunctions: if the 2112 engine is running differently, it is adjusting differently - measure the compression, is it normal? Inspect the ignition module, high-voltage wires and spark plugs, these are the main tasks in this case. VAZ engine speed fluctuates 2112

1.5, the following should come under suspicion: throttle valve (clean), idle speed control, crankshaft position sensor, throttle position sensor (inspect, change) or not? Then the DMRV will blame. Subsequent malfunction, at idle and when driving (when changing gears), the engine , a problem in the dirty throttle valve, or in the IAC (idle speed controller), maybe TPS (throttle position sensor). Let's look further, the engine

2112 won't start, what's the reason?
1st is the starter and battery, 2nd is the ignition system, third is the power supply system, if you can’t hear the fuel pump running, check its power supply, is this a good period? Check the pressure in the fuel supply system. Another malfunction, engine , in other words, it heats up disgustingly to operating temperature, the thermostat has died, change it and drive without effort. What next, do you hear some knocking noise in the VAZ 2112 ? There is almost always a problem with the hydraulic compensators. On the contrary, they have nothing to do with it, then there is low or very high oil pressure or the connecting rod or main bearings are knocking, and of course the pistons are also knocking. In our example, it is better to go to a service center for diagnostics. It’s better to go for diagnostics and for which the design is intended when the VAZ 2112 engine pulls poorly, then you need to measure the fuel pressure in the rail, maybe it’s the injectors, maybe the filters are clogged, or maybe the clutch has just arrived. That's not all :) Can you feel the vibration of the VAZ 2112 engine? Problem with: idle speed regulator, high-voltage wires, spark plugs, lambda probe, voltage regulator, clogged injectors, incorrect ignition timing. The list is solid, so as not to guess and waste time, let’s go for diagnostics.

Messages 7

1 Topic by alex3004 2015-04-22 18:55:45

• alex3004
• Participant
• Inactive

• From: Rostov region
• Registration: 2013-10-11
• Messages: 62 Thanks : 13
• Car: VAZ 2110103

Topic: How to replace a body part with a VIN number?

please tell me, has anyone encountered such a problem? it is necessary to cut off the front right side with the numbered glass and weld a new one without a number! but not a single master undertakes to do this without some kind of piece of paper authorizing dismantling and welding work in this place. If anyone knows who exactly I should contact, please tell me. Thank you very much in advance! p.s. They told me to contact the MREO, but they all point their fingers at each other and say that this is the first time they have encountered something like this.

2 Reply from Anton 2015-04-23 06:04:51

• Anton
• Local
• Inactive

• Registration: 2014-02-20
• Messages: 2,207 Thanks : 255

Re: How to replace a body part with a VIN number?

3 Reply from iliaBkmz 2015-04-24 08:00:15

• iliaBkmz
• Forum legend
• Inactive

• Registration: 2012-11-12
• Messages: 2,040 Thanks : 584
• Car: outlander and 2104

Re: How to replace a body part with a VIN number?

To be honest, all this overcooking of the numbered glass is a big headache. The one who will digest (only official service) must have permission to perform this type of work, with a copy of which then you need to go to the traffic police. But they will most likely still send you for examination. In general, there are a lot of headaches with such machines - I’m telling you from personal experience! Usually (in practice, such cars are used by those who have friends in the traffic police).

4 Reply from alex3004 2015-04-26 00:02:43

• alex3004
• Participant
• Inactive

• From: Rostov region
• Registration: 2013-10-11
• Messages: 62 Thanks : 13
• Car: VAZ 2110103

Re: How to replace a body part with a VIN number?

Thank you for your responses to this topic! I also found three generations of acquaintances in this field, but what is even more important - guys, it’s better to look for more than a dozen handicraftsmen, someone will take it! That's how I found the bodybuilder. He said, “Take a lot of money, but I’ll save the glass.” "The man answered for his words! so forum members, don’t despair, there are people who are afraid of this.

5 Reply from sergo9531 2015-04-26 13:04:29

• sergo9531
• Local
• Inactive

• From: Domodedovo
• Registration: 2014-01-12
• Messages: 578 Thanks : 208
• Auto: 21114

Re: How to replace a body part with a VIN number?

alex3004 , it turns out that the master played tricks on his own glass and made it in such a way that an ignorant person would not know anything?

how to determine the type of engine where the engine number is stamped

The simplest and fairly standard method to increase the power of a VAZ 2112 engine is to change the camshafts to STI-1 (for a standard receiver), STI-3.1, STI-2 or Stolnikov 8.9 (more expensive than others), to make life easier for the engine, we install a light ShPG from the 126 engine , throttle body 54-56 mm, from an outboard receiver and ejection 4-2-1. At the output we have about 120 hp. Refinement of the cylinder head and evil wide-phase shafts can increase power to 130-140 or more hp. To this it is worth adding a crankshaft with a stroke of 75.6 in order to increase the volume of the VAZ 2112 engine to 1.6 liters, lightweight T-shaped valves, modification of the cylinder head and intake manifold, at the output we get about 140-150 hp. For a small town, these characteristics are enough for almost any car owner. Installing a compressor on a VAZ 2112

compressor for vaz 2112 autoturbo

Another way to modify the 2112 engine and obtain identical power is to install a compressor. In a well-known video clip, it is clearly explained to our client what is required for the successful implementation of the project using the example of an eight-valve engine, this compressor is possibly installed on a 16-valve engine, the output of the engine will be more than 130 hp. Other compressors are also used, but blowing more than just 0.5 bar into a standard engine, without lowering the compression ratio, is risky.

To increase the stability of the engine and the response of the accelerator pedal, install 4 throttles. The essence is that each cylinder receives its own throttle valve and therefore the resonant air vibrations between the cylinders disappear. We have a more measured engine operation from bottom to top; in addition, the intake is shorter and air enters the cylinders very quickly. The most popular way is to install a 4-throttle intake from Toyota Levin on a VAZ. You need to purchase: the unit itself, make an adapter manifold and pipes, in addition to this you need a zero filter, injectors, MAP (absolute pressure sensor), fuel pressure regulator and firmware. There are also ready-made 4-throttle intake kits available for sale that are fully usable. It is recommended to install a light piston engine (from Priora, for example), because turning a languid piston is an additional waste of energy, wide-phase shafts, for example STI-6 or STI-7 Touring Light, a modified cylinder head with light valves and solid pushers, Opel C20XE springs, spider ejection 4-1, as it is also called 4-2-1 on the 51st, or better yet 63rd pipe.

Differences 16th grade. VAZ engines detailed review

With the correct configuration, the 2112 engine produces about 180-200 hp. To completely launch the car into space, with a volume of 1.5 liters, we install STI Sport-8 shafts. It makes no sense to write a motor configuration for such shafts; very few people decide to assemble something like this. There are such disadvantages as a reduction in the service life of the motor; all this is logical, because the engines on the pipes spin at 8000-9000 or more rpm. So constant breakdowns and frequent engine repairs 2112

The desire to inflate your own engine haunts all owners of a one and a half liter gear; how to implement tried and true methods of supercharging on your engine is described Here, at the very bottom of the article, these principles are applicable to the 2112 engine.

Source