When registering or deregistering a vehicle with the road inspection authorities, the engine number is checked. This is required in order to accurately confirm the legal origin of the car. In addition, the need for verification may also be required during operational checks on the road, for example, if a similar car is reported stolen.
Engine number VAZ 2114
Before purchasing a new car, you should definitely check that its engine number matches the number indicated in the documents. Indeed, if the engine is not original, serious problems may arise during registration.
For this reason, every car enthusiast should know where the VAZ 2114 engine number is located and how to check it.
The need to verify the number
It is necessary to check the information regarding where the engine number is located on the VAZ 2114, like any other car. This must be done using the official documentation that comes with the vehicle. There are always two main reasons for checking:
- These are cases of purchasing a stolen car. This situation can be avoided - you just need to check the engine number of the VAZ 2114 car, as well as the body, for compliance with the values in the documents. If the values do not match or the numbers themselves are slightly erased, then most likely the vehicle was stolen. This recommendation applies not only to buyers, but also to sellers. The likelihood that a person will refuse to buy a car with a damaged VIN code is high. Therefore, you need to carefully monitor and maintain the condition when the situation requires it.
- The second case is registration and deregistration. Road inspection authorities take this more seriously than future buyers, due to the fact that the VIN code is a guarantor of the legal origin of the car. In addition, there is another case when traffic inspectors need to look at the engine number of a VAZ 2114 - an operational check. It is usually carried out when a similar vehicle is reported stolen. And it is in such a situation that an acceptable state of the engine VIN code will come in handy more than ever.
Now that the question of why the VIN code of a vehicle's engine is an important element has been sorted out, let's consider all the possible places where the code is usually located.
Maintenance
If you believe the plant, the manufacturer, the VAZ 2114 engine must be serviced every 12-15 thousand kilometers. It depends on what marking the motor is installed on the vehicle. Maintenance scheme for all engines installed on the “fourteenth” model:
- At the first maintenance, the oil, oil filter and air filter element are replaced, as well as the functionality of all systems is checked.
- The second maintenance is done after 12,000 km. In this case, it is necessary to change the oil and oil filter element.
- Third maintenance – 25,000 km, replacing not only the oil, but also the air filter, and ongoing repair of faults.
- After 45,000 km, it is necessary to replace the timing belt and roller so that the VAZ 2114 engine does not have to be overhauled.
Subsequent maintenance is carried out in accordance with 2 and 3 maintenance.
[custom_ads_shortcode3]
Where to look for the engine number on a VAZ-2114
In accordance with official criteria, the engine number of the VAZ 2114 is located on the cylinder block. More precisely, this is the place near the thermostat on the right side; The clutch housing is located slightly lower than the location of the VIN code itself.
To facilitate the search process and direct comparison, you need to remove the air filter. It is advisable to do this together with the pipes, because they will block access. It is also necessary to pay attention to the fact that the process of applying the VIN code itself is a method of impact branding. This means that the number is unlikely to be erased on its own due to wear and tear of the car.
Engine tuning
Tuning version of the VAZ 2114 engine.
Tuning the VAZ 2114 engine is carried out typically for the entire series of power units installed on 2113-2115. As you know, there are two options for modifying the engine: mechanical and chip tuning. The modification scheme is quite simple, the mechanics are done first, and then the electronics. But many car enthusiasts only carry out chip tuning to reduce consumption, since the price of fuel is too high.
Chip tuning of the VAZ 2114 is carried out using special equipment and is aimed at increasing power or reducing fuel consumption. This type of work should be entrusted to professionals, since only they have the necessary skills and knowledge.
As for mechanical modifications, the scheme is standard. In case of complete modification of the motor, it must be completely disassembled. It is necessary to gain full access to the interior of the power unit. Next, the process of boring-honing and installation of new spare parts with light weight is carried out.
Installed turbine on a VAZ 2114 engine After assembly, it is recommended to install a tuning version of the cooling and exhaust system, since combustion will occur with the release of more heat than before. Standard oil will not be suitable for the VAZ 2114 engine after tuning, so it is recommended that the modification process be done by professionals.
[custom_ads_shortcode2]
Information plate
Separately, it is worth noting the information table that is located on the right on the front pillar. The table contains a duplicate engine and body number. In addition, information is included about the year in which the car was produced, the plant that produced it, etc. In fact, all that information that is a priori basic.
However, the fact that it only duplicates meanings does not detract from its importance. This means that her condition should also be good. If there are small areas of rust, you need to get rid of them; if there are small chips, which make access to information difficult, then, if possible, the plate needs to be replaced. Ideal condition - smooth surface without rust and the presence of rivets that fix it to the car body.
How to decipher the VIN code
Now that information regarding where to look for the engine number on a VAZ 2114 has been found, it is important to determine the meaning of the VIN code. It is most rational to consider the information plate, which immediately indicates all the necessary requirements. It looks like this:
So, now in order:
- Serial number, which is intended for spare parts. It corresponds to the serial ID of the vehicle that came off the assembly line.
- A numeric value indicating the vehicle's approval type.
- Identification ID, in which XTA is the code of the plant that produced the car; 211440 — vehicle model; 6 - year in which the vehicle was produced; 0000000 (last 7 digits) - body serial ID.
- Numerical value of the installed motor model.
- Acceptable possible loading on the front axle.
- Acceptable and possible loading on the rear axle.
- Identification IDs of configuration and execution options.
- Permissible vehicle weight.
- Permissible weight of the vehicle if it has a trailer.
Knowledge of this information is necessary for basic literacy and the ability to navigate the main documentation of the vehicle.
Every driver should know where the VIN code is located in his car. This is confirmed not only by the main reasons, but also by situations that are impossible to predict. It's worth spending a few minutes once to avoid problems in the future.
Main characteristics of the motor
All engines that were installed on the vehicle had approximately the same characteristics and design features. So, the motor is easy to service and repair with your own hands. Let's look at the main technical characteristics of the VAZ 2114 engine:
VAZ 2111.
Name | Index |
Volume | 1.5 liter (1499 cm3) |
Number of cylinders | |
Number of valves | |
Fuel | Petrol |
Injection system | Injector |
Power | 77 hp |
Fuel consumption | 8.2 l/100 km |
Cylinder diameter | 82 mm |
VAZ 21114.
Name | Index |
Volume | 1.6 liter (1596 cc) |
Number of cylinders | |
Number of valves | |
Fuel | Petrol |
Injection system | Injector |
Power | 81.6 hp |
Fuel consumption | 7.6 l/100 km |
Cylinder diameter | 82 mm |
VAZ 11183.
Name | Index |
Brand | |
Marking | 1.6 8V |
Type | Injector |
Fuel | Petrol |
Valve mechanism | 8 valve |
Number of cylinders | |
Fuel consumption | 9.6 liters |
Piston diameter | 82 mm |
Resource | 200 – 250 thousand km |
VAZ 21124.
Name | Index |
Volume | 1.6 liter (1599 cc) |
Number of cylinders | |
Number of valves | |
Fuel | Petrol |
Injection system | Injector |
Power | 89.1 hp |
Fuel consumption | 7.0 l/100 km |
Cylinder diameter | 82 mm |
VAZ 21126.
Name | Index |
Volume | 1.6 liter (1597 cc) |
Number of cylinders | |
Number of valves | |
Fuel | Petrol |
Injection system | Injector |
Power | 97.9 hp |
Fuel consumption | 7.2 l/100 km |
Cylinder diameter | 82 mm |
Engine VAZ 2114.
All engines were equipped with 5-speed manual transmissions. Engine volume ranges from 1.5 to 1.6 liters. This car was not equipped with a large power unit. The average engine power of the VAZ 2114 is 85 horsepower.
[custom_ads_shortcode1]
Vehicle identification numbers VAZ-2114
Location of identification numbers in the engine compartment: 1 - vehicle identification number;
2 - summary plate with vehicle nameplate data; 3 - engine number (at the end of the cylinder block under the thermostat housing) According to existing legislation, each vehicle has an identification number (VIN code). This number is recorded in the vehicle passport (PTS). The identification number and other passport data of the vehicle are indicated in the summary plate.
The identification number is stamped on the body in two places: in the engine compartment on the amplifier (support cup) of the right mudguard...
Summary plate: 1 - number for spare parts (corresponds to the serial number of the car that came off the assembly line); 2 — vehicle type approval number; 3 — identification number (XTA — manufacturer code; 211440 — car model; 6 — year of manufacture; last seven digits — body number); 4 — engine model; 5 — load on the front axle; 6 — load on the rear axle; 7 — codes of vehicle version and configuration; 8 - maximum permissible vehicle weight; 9 - maximum permissible weight of a vehicle with a trailer.
Note. The model year of manufacture can be indicated by a number or a letter of the Latin alphabet (see table). ...and on the luggage compartment floor reinforcement next to the spare wheel mounting bracket.
The engine number is stamped on the end of the cylinder block above the clutch housing (under the thermostat housing).
To read the number, you must remove the air filter housing.
Symbols for the year of manufacture
Model year | Symbol |
1997 | V |
1998 | W |
1999 | X |
2000 | Υ |
2001 | 1 |
2002 | 2 |
2003 | 3 |
2004 | 4 |
2005 | 5 |
2006 | 6 |
2007 | 7 |
2008 | 8 |
2009 | 9 |
We figure out where the engine number is on VAZ and other cars
An inexperienced person will spend up to an hour searching for the engine number under the hood of a car. First, let's decide for what purpose you are trying to find this very number? If you need information about the engine number as such, you will find it in the most important car document, PTS. In addition, it is present on the vehicle registration certificate.
The need to find the license plate on the engine itself will most likely appear only in the process of checking the part numbers, when you appear at the State Traffic Safety Inspectorate to register your car. Or, during the sales process, a potential client will want to make sure that the engine on the car is original.
Where can I look for the engine number on many vehicle models? For this purpose, you need to take with you the following tools:
- Small lantern
- Chemicals to remove rust marks (WD-40 works great)
- Brush with metal bristles.
It should be said that the engine number on the majority of vehicles can be found on the engine itself. Usually this is the motor module itself, less often its parts, and even less often on removable elements. Most often, the license plate is stamped on a small metal plate; it is usually soldered into the engine block. Or the number may be stamped on the motor itself. Different vehicle models have different numbers, but in the vast majority they are stamped on the surface of the engine itself.
Typically, the license plate must be looked for in the following places:
- On the surface of the cylinder module, or on its side - in a visible place,
- Near the engine intake manifold,
- At the bottom there is a hole for the dipstick, which we use to check the oil level,
- Where the motor connects to the gearbox,
- on the mounting outlet module.
Be that as it may, the engine number can be found in other parts of it.
Conclusion
The VAZ 2114 was equipped with different engine options, both eight and sixteen valves. They all had different technical characteristics and design features. But all modifications are quite repairable and easy to maintain. As for tuning, each motorist decides for himself how to modify the engine and for what purpose.
All VAZ 2115 models, starting from the year of manufacture, have a simple design, which easily allows you to check the engine number on a VAZ without referring to the official documentation of the vehicle. However, it is worth taking a closer look at the need for the number, its decoding and the contents of the information plate.
[custom_ads_shortcode3]