How to replace the cabin filter of Lada Kalina - instructions with photos

The cabin air filter of a modern car, including the Lada Kalina, plays an exceptional role in ensuring the health and well-being of both the driver and his companions. This filter element becomes especially relevant in dusty city streets and countryside. Its presence allows you to avoid the penetration of harmful substances and dust suspended in the outside air. A high-quality cabin filter in its unclogged state will allow passengers inside the cabin to enjoy a pleasant and clean atmosphere, but timely replacement of the cabin filter is required.

When designing the Lada Kalina model, the developers sought to ensure maximum convenience in terms of access to the element so that the cabin filter could be replaced, thanks to which even an inexperienced owner can do this on their own. In this article we will figure out where the filter is located, as well as how to change it correctly.

1449653489_2279_4_16_07_kopirovat


In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.
In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.

In this case, the arrow on the filter label should point down, and the word “front” should point toward the front of the car.

Replacing the cabin filter Lada Kalina

The cabin filter on Lada Kalina is an important element of the air conditioning system in a car. The air flow coming from outside must be filtered and cleaned of possible impurities, smog, sand, and dust. The better the absorption, the less harm to the human body.

The design of the cleaning element KALINA (sedan, hatchback, station wagon) is similar in appearance to an accordion. This type of shape is most suitable for maximum circulation and filtration of air flow.

For the Lada Kalina model, two types of cleaners are made: regular and carbon. The difference between the first and the second is the ability to retain exhaust gases.

How often should I replace?

In accordance with the requirements of the operating instructions, the cabin filter on Lada Kalina is replaced every 8,000 km. mileage The indicator is average. In conditions of increased dust and gas contamination, reduce the replacement interval by a third.

The first signal that it is time for an update is fogging of the windows and weak air flow from the deflectors. Less often - the appearance of a fetid odor, sweetness, rot in the car interior.

Considering the simplicity of the procedure, you can change the cabin filter on a Lada Kalina yourself. Contact the service center for help, as a last resort, when the installation technology is broken or there are other damages associated with unprofessional intervention. At the stage of the factory warranty, it is advisable to refrain from do-it-yourself repairs.

Choosing a cabin filter for Lada Kalina

The most common foreign manufacturers of consumables for Lada Kalina:

  • CORTECO, article number 80000999, price from 1000 rubles. Filter with the addition of activated carbon. Dimensions: 25.0 x 15.0 x 3.25 cm;
  • DELPHI TSP0325329, from 1000 rubles;
  • ALCO FILTER MS-6405, from 700 rubles;
  • BOSCH 1987432230, from 700 rubles;
  • CORTECO 80000998, from 700 rubles;
  • FILTRON K1229, from 700 rubles;
  • MANN-FILTER CU26004, from 700 rubles;
  • SCT SA 1150, from 500 rubles;
  • WIX FILTERS WP2000, from 500 rubles.

1.6 liters / 16 valves / 90 hp / from 2004 onwards

  • AG Auto Parts, AG5011, from 300 rubles;
  • ALCO FILTER, MS-6405, from 300 rubles;
  • BOSCH, 1987432230, from 300 rubles;
  • CHAMPION, CCF0419, from 300 rubles;
  • COOPERSFIAAM FILTERS PC8358, from 300 rubles;
  • FILTRON K1229A, from 300 rubles;
  • FILTRON K1229, from 300 rubles;
  • FRAM CF11640, from 300 rubles;
  • KNECHT LA933, from 300 rubles;
  • MAHLE ORIGINAL LA933, from 300 rubles;
  • MANN-FILTER CU26004, from 300 rubles;
  • SCT Germany SA1150, from 300 rubles;
  • WIX FILTERS WP2000, from 300 rubles.

1.6 liters / 82 hp / until 2010

  • FILTRON, K1230, from 500 rubles;
  • KNECHT LA944, from 500 rubles;
  • MAHLE ORIGINAL LA955 from 500 rubles;
  • WIX FILTERS WP2012, from 500 rubles;
  • WIX FILTERS WP2040, from 500 rubles.

1.4 liters / 8 valves / 88 hp / from 2004 onwards

  • AG Auto Parts, AG5055, from 300 rubles;
  • ALCO FILTER MS6306, from 300 rubles;
  • BOSCH 1987435244, from 300 rubles;
  • CHAMPION CCF0650, from 300 rubles;
  • CHAMPION CCF0720C, from 300 rubles;
  • FILTRON K1300A, from 300 rubles;
  • KNECHT LA955, from 300 rubles;
  • MAHLE ORIGINAL LA984, from 300 rubles;
  • MANN-FILTER CU26789, from 300 rubles;
  • SCT Germany SA1276, from 300 rubles;
  • WIX FILTERS WP2014, from 300 rubles.

1.4 liters / 16 valves / 88 hp / from 2008 onwards

  • AG Auto Parts, AG6012, from 300 rubles;
  • ALCO FILTER MS6422, from 300 rubles;
  • BOSCH 1987434498, from 300 rubles;
  • CHAMPION, CCF0425, from 300 rubles;
  • FILTRON, K1321A, from 300 rubles;
  • FILTRON K1396, from 300 rubles;
  • KNECHT LA785, from 300 rubles;
  • MAHLE ORIGINAL LA652, from 400 rubles;
  • MANN-FILTER CU26545, from 400 rubles;
  • SCT Germany SA1020, from 400 rubles.

When purchasing on your own, always give preference to specialized stores, dealership centers, and authorized workshops. Where they provide a quality guarantee for the products sold.

Preparatory stage: a set of automotive tools, screwdrivers, a new filter, rags. Where is the cabin filter located: in the engine compartment, on the left side, under the frill.

Sequencing:

  • We set the car on the hand (parking) brake, open the hood;
  • in the upper left part, under the frill, unscrew the plastic decorative cover. It is secured with two bolts. We extract it;
  • carefully pry up the air element, carry out preventative maintenance on the housing, remove dust, debris and leaves, which impedes natural air circulation;
  • we lay a new purifier and assemble the structure.

We check the proper functioning, tightness of fit, and tightness. Provided that the installation is correct, the filter must be changed no earlier than after 8,000 km. At the same time, we inspect the parts and mechanisms in the engine compartment. It may require prompt replacement or installation of new consumables. If difficulties arise, always consult with specialists.

Source: https://gdesobiraut.com/eksplu/zamena-salonnogo-filtra-lada-kalina/

1449653481_2279_4_16_10_kopirovat


When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.
When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.

When installing the right windshield trim, the two tabs of the trim must extend beyond the front fender flange.

How to replace the cabin filter of Lada Kalina - instructions with photos

Purpose of the filter on Lada Kalina

The supply of fresh air into the cabin is provided by the stove fan. The flow passes through the cabin filter, which should capture smoke and unpleasant odors. After a certain mileage, the filter becomes clogged, so it must be removed and replaced . In some cases, you can temporarily install a used one.

When should you change the cabin filter?

The instructions included with the car state that the cabin filter should be replaced every 15 thousand kilometers. If the operating conditions of the car are harsh (frequent trips on dirt roads), then the period is halved - after 8 thousand km. Specialists at stations recommend replacement twice a year, before the start of the autumn and spring seasons.

A clogged cabin filter must be replaced with a new one.

Where is the device located?

Opinions differ about the convenience of filter placement. Some drivers believe that the device is located well, others strongly disagree with them. If the car owner has a regular station wagon, then this part is located on the right side of the car between the windshield and the hood, under the decorative grille.

What device to put in a hatchback

Today, stores offer car owners two types of cabin filters:

The first type of filter is distinguished by two layers of synthetics, between which there is a carbon adsorbent.

Types of cabin filters - gallery


Carbon filter for Lada Kalina


“Native” Kalina filter supplied from the factory Carbon filter from the Legion company

The process of replacing the cabin filter on Kalina

Before replacing the filter, we should collect everything we need for work.

  • a screwdriver with an asterisk profile (T20 is ideal);
  • Phillips screwdriver;
  • slotted screwdriver (flat blade);
  • rags;
  • new filter.

Tools and Supplies - Gallery

T20 star screwdriver set Phillips screwdriver Slotted screwdriver

Sequence of operations

  1. Open the hood and find the place where the filter is located on the right side of the decorative trim between the hood and the windshield.


    Decorative grille protecting the cabin filter of the Lada Kalina
    Tip: for convenience, you can turn on the wipers and lock them in the up position by turning off the ignition.

  2. The grille is attached with self-tapping screws, some of which are covered with plugs. Exactly how long it will be closed depends on the year of manufacture of the car. Remove the plugs by picking them up with a sharp object (a slotted screwdriver will also do the job).


    Removing the plugs on the screws of the cabin filter grille of the Lada Kalina

  3. Unscrew all the screws (there are 4 of them in total: a pair under the plugs, a pair under the hood).


    Unscrewing the Lada Kalina filter grille screws located under the plugs

  4. Having freed the grille, carefully move it, releasing first the right, then the left edges. The Lada Kalina filter grill moves to the side
  5. Unscrew three screws, two of them hold the protective casing over the filter, and the third one secures the washer hose. The Kalina filter housing is secured with three screws: two at the edges, one in the middle
  6. Slide the cover to the right until the left edge comes out from under the bracket, then pull it upward to the left. Carefully! The opening may have sharp edges! The Kalina filter housing cover is moved to the right and removed
  7. By bending the latches on the sides of the filter, remove the old filter. The latches of the Kalina cabin filter are bent with your finger
  8. After cleaning the seat, install a new filter. Kalina cabin filter housing, cleaned before replacement
  9. Reassemble everything in reverse order.

The ability not to change the device

Whether to change the filter or not is up to the owners to decide for themselves. If it is relatively clean, you can proceed as follows:

  1. The filter is removed according to the scheme described above.
  2. Clean the seat thoroughly using a vacuum cleaner.
  3. Then vacuum the filter and rinse it with running water (for severe contamination, soaking and detergents will be required).
  4. After which it is treated with a steam generator and blown with compressed air;
  5. After 24 hours, the filter can be put back in place.

Such a replacement will last for several months, but the owner will have to replace the part as soon as possible.

About differences in device location

Regardless of the class of the Lada Kalina, the cabin filter is located in the same place. Moreover, starting with Kalina-2, many parts (including filters) were transferred to all subsequent VAZ models, so the principle of replacing this device does not depend on the body type, engine size or the presence of a car radio.

The quality of the air that passengers breathe depends on the cleanliness of the cabin filter on Kalina. It is recommended to change it twice a year; the operation is not very complicated and takes no more than half an hour.

Source: https://autoclub.su/zamena-salonnogo-filtra-na-avtomobile-lada-kalina/

Let's sum it up

There is a category of motorists whose representatives, at the slightest suspicion of any malfunction, begin to raise the alarm and, headlong, “rush” to the car service center. Here we recommend showing composure and vigilance, because many faults that arise in the Lada Kalina 2 can be easily fixed on your own. Moreover, we helped to find out where the element itself is located, as well as how to change it correctly. Why not take the chance to save money while also gaining experience. What to do is up to you!

Video instructions for replacing the cabin filter in Lada Kalina:

Rules for choosing a new device

At the moment, there are two types of devices that purify the air inside cars with air conditioning:

  • anti-dust filter – made on the basis of filter paper;
  • carbon – the composition additionally includes activated carbon.

It is recommended to replace a regular filter with a coated element in cases where the conditions in which the car is most often found can be characterized as “highly contaminated”. Compared to paper, the carbon composition is more effective at protecting the interior from dust and dirt particles.

The uniqueness of coal models lies in the fact that they are able to contain and absorb unpleasant odors contained in the street air.

When choosing a new air purifier for the Lada Kalina without air conditioning, you should be guided by the following “rules”:

  1. Originality of consumables. The automotive market offers many analogues to spare parts from the manufacturer, but there is no guarantee of their reliability and compliance with the requirements of a particular vehicle.
  2. True to size. The purchased filter must exactly match the parameters of the seat. You can take your own measurements of the base element. The original consumable must be 260x166x30.
  3. Initial weight. More weight compared to other options may indicate the presence of more activated carbon in the composition. Accordingly, about the best degree of efficiency.

Articles

11180-8122010-80 - original article. 118-8122010-08

It is better to pay attention to proven analogues.

  • GOODWILL AG920CF is one of the cheapest filters. Reviews are good.
  • NEVSKY FILTER NF-6003 - domestic analogue. Available at most automotive stores.
  • BIG FILTER GB-9831.
  • MANN CU26004.
  • Bosch 1 987 432 230 is a more expensive option, but this is a company.

We installed the Nevsky filter. The article can be seen in the photo. I stood up like a native.

Dismantling the old

Replacing the cabin filter begins with the work of removing the old filter. Before doing this, you should find out where the component will be placed. To do this, open the hood and find a compartment on the passenger side, which is closed by a grille made of plastic.

Kalina 2 station wagon or Granta Liftback which is better

Lada Granta speed sensor where is it located?

Procedure.

  1. We dismantle the specified grille. To do this, we unscrew the screws, having previously removed the decorative plugs from the surfaces of their heads. To make removal easier, pry it off with a screwdriver.
  2. Unscrew the screws (use a wrench with an asterisk tip). Here, for ease of operation, you should “retract” the wipers of the Lada Kalina 2. To do this, turn on the ignition, then activate the windshield wipers and turn off the power at the moment when these elements take a vertical position.
  3. We dismantle the casing. To do this, unscrew the three screws, and then remove the protective component itself. To avoid damage to the structure, we proceed as follows: first, we lift that part of the casing that is located close to the wing, and then move it in the direction of the opposite wing.
  4. Acting with great care, with scant finger effort we bend the plastic retainer, after which we boldly remove the filter “to freedom”.
  5. Before installing a new component, we recommend treating the seat with a vacuum cleaner and a dry cloth.

Determining the malfunction

We pay attention to the nature of the symptoms that appear. If the filter is clogged or damaged, the Lada Kalina driver observes the manifestation of the following factors:

  • the heating circuit fan motor begins to operate at increased volume;
  • there is a deterioration in the quality of ventilation of the Lada Kalina interior, which is accompanied by foreign odors and heaviness of air;
  • Interior panels and glazing areas accumulate condensation, causing fogging and poor visibility.

Replacing the cabin filter on Kalina: how to change it on a car with or without air conditioning

Every driver should know where the cabin filter is located in Kalina and why it is needed. After all, it performs an important function of cleaning the air that enters the cabin. That is why it is necessary to clearly understand when and how to replace the old filter with a new one.

Where is the cabin filter in Kalina and when does it need to be changed?

Finding the cabin filter in a Lada Kalina car is very simple - just lift the hood. It is located next to the blower unit in the front of the car on the right, between the top of the hood and the windshield. The cabin filter is used to clean the air entering the car interior from the atmosphere from dust and small sand particles.

According to the information specified in the operating manual, the cabin filter in Kalina must be replaced every fifteen thousand kilometers, but in practice this figure can be reduced to ten thousand (under extreme operating conditions).

Photo of the cabin filter in a Lada Kalina car with the hood raised

Signs of the need for replacement may include windows that often fog up or a lack of normal draft at the car's heater. As a rule, most owners do not notice this right away, so we recommend that you stick to regular replacement every 15 thousand kilometers.

Please note that there are two types of filtration systems:

Most car owners recommend a carbon cabin filter, since it is characterized by the presence of two dense layers of synthetics, between which a carbon absorbent is located. It effectively traps dust and other small particles so that they do not enter the cabin. This is especially true in large cities and megalopolises, where the level of air pollution is simply off the charts.

It is also worth mentioning the disadvantages of this type of filtration. The carbon cabin filter for Lada Kalina may be subject to desorption.

This leads to the fact that it simply cannot cope with its functions and begins to gradually let in toxic particles of dirt and dust.

But this can be avoided by banal and regular replacement at the appointed time. That is why it is best to opt for a carbon filter.

  • new cabin filter for Lada Kalina car - model 1 987 432 230;
  • slotted or Phillips screwdriver;
  • TORX-20 star key.

Open the hood of the car and find the grille that covers the filter. It is secured with self-tapping screws, and some parts of the filter are securely covered with special plugs.

Using a Torx-20 wrench, carefully remove all the plugs and unscrew the bolts.

Protective grille covered with plugs for Lada Kalina

  1. We press on the grate and with a slight movement of the hand we shift it to the right side.
  2. We remove the protective casing of the Lada Kalina stove in the place where the supporting part of the filter is located. There are three small bolts there that can be easily removed with a regular Phillips screwdriver. The bolt located in the middle must be removed carefully, since the glass washer hose runs to the left of it, and it is very easy to damage.


    Heater protective casing, arrows indicate bolts that must be removed

  3. We press out the side fastenings, slightly bending the plastic retainer with our fingers, and completely remove the old consumable, while making sure that all the debris does not fall inside.

    Try to remove the old filter so that no contaminants penetrate from its surface into the system.

  4. The last step is to install a new air barrier. We secure it with new special clamps. It is also worth noting that models with air conditioning have hoses. If they interfere, we loosen the clamps that hold them in order to securely fasten the new filter. It may be necessary to replace the condensate itself in the air conditioning system for greater effect. The assembly of all parts occurs slowly and strictly in the reverse order.


    When inserting, be careful with the air conditioner pipes!

As a rule, all these manipulations of replacing an old filter with a new one do not take more than fifteen minutes, except for the first time, when you need to delve into all the technical processes and details. If you still have any questions or certain steps are not clear to you, we recommend that you look at the practical guide to replacing the air filter on a Lada Kalina.

Replacing the air filter on a Lada Kalina is a simple and even interesting task. If desired, anyone can handle it in a fairly short period of time.

At the same time, the price of a new imported filter is a maximum of 500 rubles, and replacement services at a turnkey service station will cost you approximately 1,500 rubles.

Thanks to our instructions, you can save not only money, but also precious time.

Source: https://motorltd.ru/zamena-salonnogo-filtra-na-kaline-svoimi/

When to change

It is recommended to replace this type of filter material every 15 thousand kilometers. Nevertheless, this figure cannot be called residual. It all depends on where (exclusively in the city or more often on the highway) and how (with or without air conditioning) you operate your vehicle. If in most cases you move around a dusty city, then you need to replace it after no more than 10 thousand kilometers.

Signs of a Replacement Needed

  • It became harder to breathe inside the car;
  • The stove and air conditioner are too loud;
  • Windows quickly fog up;
  • In the summer, the air conditioner does not cool properly, and in the winter the stove practically does not heat;
  • The appearance of an unpleasant odor (due to the accumulation of dirt and bacteria).

Replacement frequency

For models of its own production, each manufacturer sets a scheduled frequency for replacing one or another consumable component. Regarding the air filter for the practical Lada Kalina, we note the following aspects:

  • if the operation of the Lada Kalina 2 car is dominated by driving through dusty rural expanses, then you should be inclined to replace the filter, observing a frequency of at least 15 thousand km;
  • Using a car in urban conditions means observing a replacement frequency of 30 thousand km. These regulatory postulates are equally valid for both generations of the popular Lada Kalina. Even in cases where the car has already passed the regulatory threshold, and there are no signs of filter clogging in the cabin, you should still think about replacing this component.

Replacing the cabin filter of Kalina-2 with your own hands: photo

The cabin filter of the Lada Kalina is a small piece made of corrugated paper, the condition of which determines the cleanliness of the air in the cabin.

More precisely, the air should flow in clean in any case, but the amount of air supplied depends on the level of contamination of the filter. Let’s say that in winter the heat of the stove becomes worse.

Then, first of all, look at the filter, and only then at the condition of the heater. It is easy to understand that the cabin filter can always be replaced. And any owner can perform this operation.

Materials and equipment

The part, which we call the Lada Kalina cabin filter, is designated by the following catalog number: 11180-8122010. Look at the photos and check what is available from your suppliers.

To replace the cabin filter of Kalina-2, you will need only two screwdrivers: a Phillips (regular) screwdriver and a torx-t20 screwdriver.

We will remove the plastic frill by unscrewing 5 screws, and then remove the filter cover and change the filter.


A set of materials and tools for replacing the cabin filter of VAZ-2192/94

We will consider the sequence of replacement actions in the next chapter. In the meantime, we note that along with the filter, its protection is sometimes installed - a plastic or aluminum mesh with a mesh size of 3-5 mm. Whether such “tuning” is advisable must be decided by the owner. It is better to choose heat-resistant plastic, but in general, you must remember: making changes to the standard design entails loss of warranty.

When performing any manipulations when the hood is open, it is recommended to remove the negative terminal from the battery. And although we will not work with electrical equipment, it is still better not to neglect the recommendation - take and unscrew the terminal marked with a minus sign. It does not take a lot of time.

Step-by-step instruction

It is known that the cabin filter of the Lada Kalina-2 is replaced every 15,000 km. The indicated numbers are the maximum value, that is, in practice, replacement can be made more often.

Features of the carbon filter

The good thing about a carbon filter is that there is a carbon absorbent between two shells of synthetic material. It will cope with its function perfectly, in addition, this part will not allow dust and similar air pollutants to pass through.

Absinthe also absorbs toxic elements that enter the cabin from the exhaust system of cars passing nearby. The coal material gradually absorbs harmful substances; its structure can be compared to the structure of a gas mask. The indicators of the cabin filter are different, it is ready to be used for 6-10 thousand km, but there are some factors that do not allow us to give an exact figure. Such filters are more often used in large cities with constant traffic jams. If you live in a small town, then the operating time can increase to 20 thousand km.

The carbon filter, of course, has its drawbacks, for example, desorption. This phenomenon occurs when using carbon and a cabin filter as an absorbent. That is, the functionality of coal may cease; it will simply stop absorbing toxic substances. As a result, all this will begin to enter the salon directly from the street. Of course, the coal will always react and try to absorb chemicals, but a circular process will occur. For this reason, it is recommended to change the filter elements.

Types of filter elements

It should be noted that there are two most common types of products: - coal type; - paper type.

The carbon element has excellent filtering characteristics. The product perfectly freshens the air, copes with dust and unpleasant odors (dampness, exhaust gases and emissions). The optimal place for use is large, polluted cities. The disadvantages include the rather high price and short service life.

A paper filter element is much cheaper than a carbon one, and is slightly more durable under conditions of proper use. In principle, it also carries out all the necessary protective functions, but does not do it so zealously and thoroughly. The disadvantages include excessive fragility and wear when the product gets wet.

A little more about digital notation

If you intend to buy a new cabin filter for Kalina-2, know that this part may be designated as follows:

  • 11180-8122020-00, or 08 (there is a plastic frame);
  • 11180-8122020-01, or 03;
  • 11180-8122020-82 (produced by Lada Image CJSC), or 83 (coal, Lada Image CJSC).

The part itself may have an arrow designation. In this case, you need to remember: the arrow shows the direction of the air flow. She should look "down".

Set 11180-8122020-08

The main thing that I would like to note here is that the filter inside the compartment must be installed tightly. That is, there should be no gaps at the edges. The frame, made of plastic, does its job well.

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]