How to replace the cabin filter on a Chevrolet Cruze 1 J300

The cabin filter cleans the air taken in from outside the cabin from foreign particles, odors and other harmful impurities.
The presence of a filter element in the Chevrolet Cruze significantly increases the comfort of the driver and passengers inside the car.

In order for the cabin filter to efficiently perform its functions, it is necessary to replace it before it exhausts its resource.

It is important to use a product with a body that fully fits the seat.

Also, during operation, periodic cleaning of large debris, such as fallen leaves, may be required.

Replacement frequency

During operation, the cabin filter becomes clogged with debris. As a result, throughput is reduced and cleaning quality deteriorates.

For these reasons, the manufacturer recommends changing the filter element every 50 thousand km or once every two years, whichever comes first. In this case, scheduled maintenance should be accompanied by filter cleaning.

It should be taken into account that there are a number of factors due to which it is recommended to shorten the cleaning and replacement interval of the filter element:

• the car is operated primarily in urban areas with dense traffic flow, which requires frequent traffic jams;
• the surrounding air is contaminated with fine sand particles or similar foreign bodies;
• unpleasant odors from the outside world began to enter the cabin;
• operation of the car involves frequent driving off the road onto a dirt road;
• the driver's usual route passes through an industrial area with harmful emissions;
• There are many pollutants of plant origin in the air, for example, poplar fluff or ragweed pollen.

It is not worth saving on replacing the cabin filter, since the health and comfort of the driver and passengers directly depends on it.

When to change, what interior to install

To perform scheduled maintenance operations, there are regulations, as well as manufacturer recommendations. According to them, replacing the cabin filter of the Chevrolet Cruze I J300 heating and air conditioning system should be done every 15,000 kilometers or once a year.

Considering that the operating conditions of the car in most cases will be far from ideal, experts advise performing this operation approximately twice as often, in spring and autumn.

Characteristic symptoms:

1. Windows often fog up;
2. the appearance of unpleasant odors in the cabin when the airflow is turned on;
3. deterioration of the stove and air conditioner;

They may make you doubt that the filter element is coping with its tasks and an unscheduled replacement will be required. In principle, these symptoms should be relied upon when choosing the correct replacement interval.

Suitable sizes

When choosing a filter element, owners do not always use products recommended by the car manufacturer. Everyone has their own reasons for this, some say that the original is unreasonably expensive. Some people in the region sell only analogues, so there is a need to know the sizes by which you can subsequently make a selection:

• Height: 35 mm
• Width: 204 mm
• Length: 240 mm

As a rule, sometimes analogues for the Chevrolet Cruze I J300 may be a few millimeters larger or smaller than the original, there is nothing wrong with that. And if the difference is measured in centimeters, then of course it’s worth looking for another option.

Selecting an original cabin filter

The manufacturer recommends using exclusively original consumables, which, in general, is not surprising. They themselves are of good quality and are widely available in car dealerships, but their price may seem overpriced to many car owners.

Regardless of the configuration, on all first-generation Chevrolet Cruzes (including the restyled version), the manufacturer recommends installing a cabin air filter, carbon with article number 1808246 (Opel 18 08 246) or General Motors 13503675 or GM 13271191.

It is worth noting that sometimes consumables and other spare parts may be supplied to dealerships under different part numbers. Which can sometimes confuse those who want to purchase an original product.

When choosing between a dust and carbon product, car owners are advised to use a carbon filter element. This filter is more expensive, but it cleans the air much better.

It is easy to distinguish - the paper filter accordion is impregnated with a carbon composition, and therefore has a dark gray color. The filter cleans the air flow from dust, fine dirt, germs, bacteria and enhances the protection of your lungs.

Which analogues to choose

In addition to simple cabin filters, there are also carbon filters that filter the air more effectively, but they are more expensive. The advantage of coal SF is that it does not allow foreign odors coming from the road (street) to penetrate into the car interior.

But this filter element also has a drawback - air does not pass through it well. GodWill and Corteco carbon filters are of fairly high quality and are a good replacement for the original.

However, in some retail outlets the price of the original first-generation Chevrolet Cruze cabin filter may be greatly inflated. In this case, it makes sense to purchase a non-original consumable item. In particular, cabin filters are considered quite popular:

Conventional dust cabin filters

• MANN-FILTER CU 2442 – technologically advanced consumables from a well-known manufacturer
• BIG Filter GB-9941 – popular brand, good fine cleaning
• TSN 9.7.764 is a good manufacturer with a reasonable price

Carbon cabin filters

• MANN-FILTER CUK 2442 – high-quality and thick carbon coating
• BIG Filter GB-9941/C – activated carbon
• TSN 9.7.765 – normal quality, affordable price

It makes sense to take a closer look at the products of other companies - they also specialize in the production of high-quality consumables for passenger cars:

• Amd
• Bosch
• Denso
• Filtron
• Fortech
• JS Asakashi
• Knecht Mahle
• Kortex
• Masuma
• Miles
• Raf filter
• SCT
• Sakura
• Stellox
• Valeo
• Zekkert
• Nevsky filter

It is quite possible that sellers may recommend replacing the Cruze I J300 cabin filter with non-original cheap substitutes with a much smaller thickness. They are not worth buying, since their filtering characteristics are unlikely to be at the proper level.

Article number and cost of the original Chevrolet Cruze cabin filter and its analogues

The Chevrolet Cruze uses two types of cabin filters:

• regular, article number 13271190, and the price is about 500 rubles;
• coal, the article number of which is 13271191, and the cost is a little more than 800 rubles;

The manufacturer recommends using only the original product. Experienced car owners claim that there are a number of analogues from third-party manufacturers that are not inferior in quality to the branded filter element. The table below shows the best non-original cabin filters.

Company manufacturer	Article number	Cost, ruble
MANN FILTER	CUK2440	300-400
BOSCH	1987432413	400-700
MAHLE	LAK182	350-450
TSN	97765	380-590
Nipparts	N1340913	390-400
Denckermann	M110660	200 — 220
JC Premium	B40017PR	220-250
GoodWill AG	199 CF	260-280
Maxgear	26-0604	300-400
BSG	BSG65145013	400-450
SCT	SA 1200	420-590
Stellox	71-10205-SX	300-480
JS Asakashi	AC9205	480-520
Purflux	AH286	380-420
Denckermann	M110660K	410-450
Kamoka	F412101	440-500

Chevrolet Cruze how to disassemble the ignition key. Chevrolet Cruze, Aveo, Orlando replacement, replacement of key body

How to disassemble a Chevrolet switch key? The key is not removable! With the exception of the battery compartment cover, which can be removed to replace the battery.

The rest of the body is made in a non-dismountable form and is well glued around the perimeter. Often, car enthusiasts try to disassemble and break their own broken key themselves and in the process damage part of the board or microcircuit. In this case, the key stops working and the engine will not start.

We strongly do not recommend ordering and buying a key body somewhere in China and trying to repair the key yourself. You can end up ordering a new key if you damage your only key during disassembly.

Yes, they sell different cases, and often it is impossible to rearrange the original board into such a case without hammering and filing.

So we advise you to simply entrust all the work to a specialized workshop, which will be responsible for repairing the broken key, and in which proven cases for repairing keys are available.

We repair ignition key circuit boards only in Nizhny Novgorod and do not provide advice over the phone about their repair.

Replacing a Chevrolet Cruze key body

disassembling the Chevrolet Cruze key Thank you for your understanding. Failed to load interactive subtitles. The rating becomes available after renting the video. This feature is not available at the moment. Please try again later. Buy a Chevrolet Cruze key, buy a Chevrolet Cruze key in Ramenskoye, Moscow.

Manufacturing, disassembling a Chevrolet Cruze key for a car, making keys for a car with a chip, making keys for a car using a lock in Ramenskoye, Zhukovsky, Moscow. I lost my car keys, what should I do? Contact us, we will open your Chevrolet without damaging it, we will produce and register a new chip key in the immobilizer unit, we will remove the lost one from the immobilizer memory in the GEPHESTUS car service center.

Register the Chevrolet Cruze key.

How to disassemble the key on a Cruze

If you need to register a chip key for a Chevrolet Cruze or any other model of Chevrolet Lacetti, Chevrolet Aveo, Chevrolet Captiva, Chevrolet Cobalt, Chevrolet Orlando, Chevrolet Tahoe, etc. and you live in Noginsk, Elektrostal, Bronnitsy, Voskresensk, Domodedovo, Egoryevsk, Podolsk , Balashikha, then you can come to us at the GEFESTUS car service center in the city of Ramenskoye, not far from Zhukovsky, Lyubertsy, Moscow.

Do you need a BMW key, Kia key, Ford key, Peugeot key? Come and we will make you an ignition key and program it, we will disassemble the Chevrolet Cruze key into the immobilizer unit. An important point: In the second option, the final estimate will be larger.

Catalog items: Cheap analogues from China are available for sale. The cost does not exceed - rub. Without a chip the cost is RUB.

To dismantle you will need to use a chisel or an electric drill for drilling. During operations with the keyhole, it is not necessary to remove the steering column, but for convenience, it can be removed. The procedure is short and simple.

Replacing the cabin filter

Replacing the cabin filter is not a complicated process that you can do yourself. In order to install a new filter element yourself, you must follow the instructions below.

• Sit in the passenger seat.

• Open the glove compartment.
• Find the glove compartment opening limiter.

• Perform dismantling.

• Pull out the limiter lock.

• Move from left to right to remove the glove compartment.

• Remove the side clamp.

• Release the glove compartment as much as possible.

• Inspect the filter housing cover.

• Release the fasteners on both sides.

• Remove the cover.

• Remove the old filter.

• If scheduled maintenance is being carried out and there are no plans to replace the filter element, then after blowing with compressed air, it is possible to install the filter in place.

• Clean the seat from dust.

• Install the filter element with the arrow pointing down.

• Reassemble in reverse order.

conclusions

Now we are guaranteed fresh air in the cabin and efficient operation of the stove. Good luck to everyone and clean air in and outside the cabin!

The cabin filter cleans the air taken in from outside the cabin from foreign particles, odors and other harmful impurities.

The presence of a filter element in the Chevrolet Cruze significantly increases the comfort of the driver and passengers inside the car.

In order for the cabin filter to efficiently perform its functions, it is necessary to replace it before it exhausts its resource.

It is important to use a product with a body that fully fits the seat.

Also, during operation, periodic cleaning of large debris, such as fallen leaves, may be required.

Choosing a cabin filter for Ford Focus 3

filter is installed on the car by the factory (and, accordingly, supplied as an original spare part).

Ford 1709013. This is the case when the original spare part is not that expensive (the average one costs about 700 rubles), and there are no complaints about its quality: it is elastic (accordingly, there is an option to twist it without fear, inserting it into the interior heater box), has a reliable seal around the perimeter.

However, they are not often found on the market, so you will have to consider alternatives. One of the most common and popular is TSN 9.7.876, worthy of recommendations:

Replacing the air filter ford focus 2 video.

• Filtron K1350,
• MANN CU25007,
• Fram CFA11642,
• Corteco 80001773.

As a curiosity, there is an option to bring Knecht LAK875 - this, there are no complaints about the quality of this filter, at the same time it costs three times more than the original.

How to easily remove the cabin filter

from Ford Focus 3

, how to determine the installation direction and how to install it.

Downloading a book

After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:

The book you purchased will be in your personal account, from where you can always download it.

Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website. If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book

If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.