Reading time: 8 minutes
The VAZ 2114, which is a restyling of the iconic car of the 90s of the last century - the “nine”, was produced in Russia for 12 years - from 2001 to 2013, and during this period won the hearts of hundreds of thousands of Russians. Even today, on the roads of the country you can find this car in good condition, and often with tuning to suit the taste preferences of its owner. Of course, all mechanical parts sooner or later become unusable, and the driver needs to replace the disks for his “iron horse”. Many wheel manufacturers offer potential buyers a wide range of these products for the fourteenth Lada model.
Wheels for VAZ 2114
Restyling of the VAZ 2109 from 2001 took place only in some parts of the body, so the entire base, including the suspension, wheel arches, hubs, etc., remained untouched. Therefore, the wheels on the VAZ 2114 that the manufacturer equipped its cars with were also the same.
VAZ 2114
In the simplest configuration with a 1.5 liter engine, the car came off the assembly line with 5.5J x 13 ET35 wheels, which corresponded to a radius of 13 inches and was suitable for high-profile tires with parameters 175/70/R13 and a bolt pattern of 4x98, and the drill diameter was 58.6 mm.
All other modifications from later dates (since 2003 with a 1.6 liter engine and since 2007 - 1.7 liter) were equipped with 15 radius wheels. Depending on how the car was equipped with various options, the dimensions were 5.0J x 14 ET35, 5.5J x 14 ET35, 6.0J x 14 ET35, tires came with parameters 175/65/R14 and 185/60/R14. This shows that the wheel offset does not change, and its width varies within 10 mm, which does not affect the stability of the car at all. However, with a tire width of 185 mm, maneuverability in difficult road conditions became slightly better.
Car appearance
The exterior of the car deserves many praises, although there is not the slightest hint of luxury here. The model attracts the eye with smooth lines and attractive slanted optics. Looking at the car from different angles, it can be noted that the design of the VAZ-211440 compares favorably with its predecessor with a new hood, bumper, headlights and radiator trim. The design of the car has become more European, reminiscent of some models from Renault, Dacia and Opel. This adaptation to Western analogues attracted a lot of attention from potential buyers, who immediately liked this car. New fenders and moldings are two other elements that have undergone noticeable changes. As for the bumper, it was raised slightly relative to the ground so that the car could travel not only along city streets, but also on country roads. The rear part of the body has remained almost unchanged.
The VAZ-211440 car has become much more stable and maneuverable while driving, which was facilitated by the low landing. Stunning aerodynamic qualities allow you to feel more confident on the road, which is good news. Engineers equipped the car with 14-inch wheels on stamped rims. The dimensions have remained virtually unchanged since the days of the “nine”, being 4.12 meters in length, 1.65 in width and 1.4 in height.
What wheels are suitable for the VAZ 2114
If we consider the parameters of the wheels on the VAZ 2114, without paying attention to the price, here you can also find a number of limiting factors, in particular:
- First of all, the owner must know where he is going to use his car, because driving on the highway at high speeds implies the danger of using high-profile tires. A product under pressure may accidentally become deformed or even come off the wheel at too high speeds. In this regard, when operating a car on smooth asphalt, it is permissible to install tires with a profile of 55 mm or lower, which corresponds to a radius of R15-R17.
- If a car enthusiast drives more outdoors, on dirt roads, then, on the contrary, he should leave the factory version on the car, and the replacement will only be with an increase in the width of the wheel. This is due to the fact that the side surface of the rubber also contributes slightly to traction on soft ground.
- For the same reasons, a car enthusiast should choose winter wheels with a smaller radius, since loose snow often has the same characteristics and composition as dirt.
Predecessor
Yes, 2114 is a direct descendant of model 2109, but it had a completely different design and some features. It was precisely because of this that she was more popular than the “nine”. However, another important factor was practicality. After all, the white color of 2114 was very good, it didn’t get dirty that much. The parts took a long time to wear out and were cheap. In general, a great car for a long journey.
It is worth noting that more respectable, wealthy people paid attention to the 2114 model. Therefore, although it was not in fact a higher class, it was believed that only the rich rode it. And 2109, 2108 - for more ordinary citizens of the Russian Federation. Yes, and they were not as high quality as 2114. And it itself was much better: more space, better design, style, and so on. It is worth noting that the parts for 2109 were even a little more expensive than those for 2114. Therefore, this model was completely uncompetitive. Yes, even though cars are more functional now, no one has managed to outperform all these parameters and become better than the white VAZ-2114. Each will have expensive parts, a lot of wear on all components, very incompetent colors, and so on.
Rules for choosing R13 wheels on a VAZ 2114
Thus, it is important for VAZ 2114 owners to know the following features of this product size:
- 95% of R13 wheels are sold only in a stamped version, and their price rarely exceeds 1.3-1.5 thousand rubles*
- In order to cover the unpresentable exterior of the wheels, the driver is often offered wheels along with a set of caps that perfectly imitate “casting”. However, when choosing, it should be taken into account that the less perforation on a plastic or rubber product, the worse the brake system will be ventilated, which can lead to overheating and deformation.
- The main dimension of R13 wheels for this car is 5.5J x 13 ET35, however, if desired, the driver can increase the width by 1 dimensional step - up to 5.5J.
- Brands that produce similar products in both ventilated and basic versions are AvtoVAZ, as well as friendly domestic enterprises K&K and SKAD. It simply doesn’t make sense to consider more expensive manufacturers in the case of 13 radius in “stamping”.
Closeness
The bottom line is that, according to reviews from the owners of this car, and just commentators on the Internet, there is very little space in the car. Even if you do not own a new VAZ-2114, you understand how difficult it is to get into it. It's all about size. After all, the height and width are similar to what you would ride on a motorcycle. You have to tilt your head very hard to avoid hitting yourself, and you have to get in with friction against the steering wheel or other parts of the cabin.
Yes, if you are claustrophobic, you won't get hurt or be constantly stressed while in it, but it's still a big disadvantage. When driving, you don’t even notice that the car is so cramped. After all, you only keep your eyes on the road. It is worth noting that rear passengers are just as uncomfortable as you are. There are no “oohs” and “aahs”, this is not an S-Class from Mercedes Benz. Well, it is what it is.
Rules for choosing R14 wheels on a VAZ 2114
To choose the right wheels of this size, the owner should know some facts:
- If the choice fell on “stamping” with hubcaps, you need to make sure that the perforations in the wheels correspond to the clips on plastic or rubber products, otherwise the hubcaps simply will not fit and they will have to be secured with cable ties.
- It is best to choose ventilated wheels, that is, those that have a sufficient amount of perforation, because the brake disc or drum, as a rule, especially during long driving, gets very hot and can deteriorate.
- Alloy wheels should be purchased with the same offset ET35, which is set by the manufacturer at the factory, since otherwise the wheels will either be too recessed or, conversely, protrude beyond the transverse dimensions of the car.
- The rubber must have a profile of no more than 65 mm, otherwise it will touch the fender liners or wheel arches on sharp turns or when driving on uneven roads.
- Among the most popular brands, you should choose K&K, SKAD, IFree, VSMPO Aurora, YST and some other domestic manufacturers. It makes no sense to consider importing a VAZ with a similar size, since the aesthetic appearance will not be achieved, and the price will be 2 times higher.
Story
This machine has its own path, its own line, which it has successfully bent and continues to do so. She doesn't want to deviate from her trajectory of success, and the producers wanted to do just that. She lives like in the samurai code. She lives, but thinks she is dead. Of course, it is no longer produced; the last release from the assembly line of the Volzhsky Automobile Plant was back on December 24, 2013. However, they still drive it to this day and love it just like they did in those days. Everyone saw her off: they wrote sad songs and words, there were farewell events for the owners of this car. After all, it is a mark in history, and the white Lada 2114, and its manufacturers understand this very well. And their decision to stop creating the machine can be understood: it has lived its life, squeezed the maximum out of itself. And, of course, we need to give way to young people who are as promising as the white Lada-2114 in its time. At one time, half of the Russian Federation rode it, and it was normal.
Rules for choosing R15 wheels for 2114
Wheels 15 by 2114 are the most popular replacement option for every owner of this brand of car, since the price/quality ratio and the appearance of larger wheels largely encourage the purchase.
First of all, it is necessary to say about the versatility of the size, since the 60 mm tire profile suitable for these wheels is usually made in the off-season version, that is, the wheels will have the necessary characteristics both for high-speed driving on asphalt and when traveling in winter .
The main size recommended by the manufacturer is 6.0J x 15 ET45, 6.5J x 15 ET40 or 5.5J x 15 ET45. The maximum tire width can be 205 mm, and the offset can be 45 mm, and it must vary depending on the thickness of the rim in order to center the position of the wheel under the wheel arch.
Companies offering these cast wheels on the market are Venti, Tech-Line, Aero, Neo and others.
TECHNICAL CHARACTERISTICS OF THE FOURTEENTH
First, let's look at the main characteristics of the VAZ 2114.
The fourteenth model is a 5-door hatchback, with the following body dimensions (mm): L – 4112, W – 1650, H – 1402. Vehicle weight – 970 kilograms, maximum loading weight – 470 kg.
The wheelbase of the VAZ 2114 is similar to the nine - 2460 mm, the track between the front wheels is 1400 mm, the rear - 1370 mm. In all modifications, the fourteenth has a front drive axle. Ground clearance between the body pan and the road is 170 mm.
The car is equipped with a 5-speed manual transmission with the following gear ratios:
- First speed – 3.636;
- Second – 1.95;
- Third – 1.357;
- Fourth – 0.941;
- Fifth – 0.784;
- Reverse – 3.53.
The fuel tank of the fourteenth holds 43 liters of gasoline. The fuel recommended by the manufacturer is AI95.
The VAZ 2114 has front disc brakes and drum brakes at the rear. The braking distance of a loaded car at a speed of 80 km/h is 38 meters.
The VAZ 2114 was produced with two engine options - 8 and 16 valves. All the differences between them are discussed in detail in the last section of the article.
Rules for choosing R16 and R17 wheels on a VAZ 2114
As the disk increases in size, its mass increases, and the “casting” here will be too heavy for a compact car. Alloy wheels will have a slight effect on the dynamics, acceleration time from a standstill, and maneuverability when cornering. That is why it is worth considering forged options, since only these discs, with greater metal strength, are quite light, because they are made of steel with a different chemical composition.
The second aspect is that 17 radius practically does not exist in “stamping”, since thin metal is easily deformed, and the owner of a Lada 2114 is unlikely to be able to save money here.
Too low a rubber profile (40-45 mm) almost completely eliminates safe and comfortable driving in mud or loose snow, so this size is ideal for operating a car in urban environments and exclusively in summer.
When choosing these wheels, the driver can consider many foreign manufacturers, since the complexity of their production by domestic suppliers significantly affects the quality.
Among the disadvantages, one can also highlight the fact that the wheel arch of the fourteenth model does not allow the installation of a disk with a width of more than 215 mm, and with a radius of 17, one often wants to use a dimension of 235 or higher, which obliges the owner to install additional mudguards.
Pros and cons of the “four”
Owners about the peppy engine. Acceleration dynamics are 17 seconds/100 km, which is not bad at all for domestic cars. Fuel consumption is 7 liters per 100 km in city mode and 5 liters on the highway.
The ground clearance is not bad - 16.5 cm. The car is adapted to “killed” roads and goes well in the snow. The suspension is strong and rarely breaks. But when hitting a hill, the front suspension extension fasteners may be damaged. The reason is the fragility of the aluminum “crab”.
Gearbox synchronizers wear out quickly. To avoid buying a car with such a breakdown, move the shift lever during the inspection. If you hear extraneous sounds, there is something wrong with the synchronizers.
Due to the softness of the metal, dents and mechanical damage easily appear on the body. The metal is not galvanized, so rust is a natural phenomenon for the “four”. Spots appear in the contours of the arches, sills, places where the bumper and moldings join the body. The quality of the paintwork is average and prone to chipping.
And the saddest thing about the car is the lack of passive (not to mention active) safety features. There are no airbags or seat belt pretensioners in the cabin. If the car collides with an obstacle, passengers may receive injuries of varying severity: from bruised shins to fractures of the chest and cervical vertebrae.
Car parts are relatively inexpensive. The bumper can be bought for 3,500 rubles, the hood for 7,500 rubles, and the engine is estimated at 10 thousand rubles. For comparison, for a new bumper of the popular Lacetti in Russia they are asking 5,000 rubles, for the hood - 8-12 thousand rubles, for the engine - 30-60 thousand rubles.
General parameters for all disks on the VAZ 2114
Drilling (bolt pattern) LZ/PCD: 4/98 (number of holes/radius of the circle on which their centers are located)
Center hole diameter (DIA): 58 mm (corresponds to the outer diameter of the car hub)
In our humble opinion, it is better to buy castings for a VAZ 2114 than stamped wheels. Modern alloy wheels can withstand exposure to reagents for several seasons, and are often even cheaper in price than steel wheels.
Section navigation
user's menu
Search
Nostalgia
Yes, you might think that this is a completely dead car. No, just look around - how many of them are left! However, when you remember that it is no longer produced, tears of nostalgia appear. After all, you are essentially driving a car that will never appear again. She did not go into eternity, she remained afloat, but this will be for the last 10-20 years and that’s all.
Now, it is no longer even in the collections of rich people. But it’s better to enjoy the present time: young people are still driving around the city, there are a lot of them in traffic and traffic jams, they are nimble between cars, and as a sign of respect, many motorists let the VAZ-2114 pass. And its advantage over all other cars is that it is unique, not like everyone else. Especially if the owner tuned the white 2114.
Advantages and disadvantages of super cars
Each car, regardless of the manufacturer and type of model, has its own advantages and disadvantages, including the super car VAZ 2114.
Advantages: good aerodynamics, good appearance, playful power plants, good ground clearance, in demand by young people, great opportunities for tuning, initially the base car has a small and stylish rear stall, front-wheel drive, high stability, the bumper is painted completely to match the body color, enlarged wear resistance of the suspension, europanel on-board computer, heated front seats, front electric windows, low cost, cast wheels, adjustable steering wheel, easy repairs, low fuel consumption.
Cons: door handles often fail, the plastic bumper breaks easily, the car quickly rots, there is little free space inside the cabin, a weak level of security, the car does not have air conditioning or power steering, poor build quality, there is little space in the trunk.
