How much oil is poured into the box and transfer case of UAZ 469

UAZ is an excellent domestic car with its pros and cons of our assembly. But today we won’t talk about the merits of this SUV; that’s what Test Drives are for. We are interested in another question: how to use Liqui Moly to service a UAZ car completely from the engine to the coolant.

This handsome guy.

The time has come for a complete maintenance of the UAZ car, but as it turns out, too many fluids are required for replacement, namely in the engine, in the transfer case, in the gearbox, in the axles - there are two of them.

Your head is spinning, and you, of course, have lost your service book. We will give some recommendations on the choice of oils and liquids using the example of a 2010 UAZ. with a ZMZ gasoline engine. These recommendations are suitable for the owner of any UAZ car, including the Patriot.

Transmission oils for UAZ gearboxes, transfer cases and axles, classification of oils

Transmission oils are designed to lubricate parts of manual transmissions, transfer cases and drive axles.
They create a strong lubricating film at the contact points of the parts of these units, which can withstand heavy loads. Gear oils are defined and differentiated by classifications that are widely accepted today: SAE J306 for viscosity, such as 80W, 90, 75W-85 or 80W-90, and API, which contains a comprehensive assessment of gear oils for performance properties, such as GL-4 or GL-5 . In addition, along with the API specification, indicators according to the American military specification, denoted by the MIL index, may sometimes be used. For example MIL-L-2105A or MIL-L-2105B.

Features of the classification of transmission oils according to SAE and API

SAE viscosity grades with the letter W refer to seasonal oils for the cold season, for example 75W or 80W.

Accordingly, without W - to oils for warm summer time, for example 90 or 140.

However, since the resource of transmission oils is quite long, using seasonal oils in everyday use, changing them in units every six months, is very inconvenient and not economically profitable.

The API classification currently contains five categories - GL-1, GL-2, GL-3, GL-4 and GL-5, which show the applicability and quality level of gear oils. For example, in category GL-5 - oil contains extreme pressure, anti-wear and other additives, used for hypoid and other types of gears in gearboxes and drive axles of cars.

Transmission oils for UAZ Hunter and UAZ Patriot gearboxes

Several types of synchronized gearboxes can be installed on UAZ Hunter cars and all models based on it: a four-speed Russian-made, a five-speed ADS made in China or a five-speed DYMOS made in Korea. On the UAZ Patriot and all models based on it, only a Korean-made five-speed DYMOS gearbox is installed.

The plant recommends filling the four-speed gearbox with SAE 75W-90 gear oil according to API GL-3. The Chinese-made five-speed ADS gearbox and the Korean-made five-speed DYMOS gearbox are SAE 75W-85, API GL-4.

Transmission oils for mechanical transfer case UAZ Hunter and UAZ Patriot

When equipping a vehicle with a four-speed or five-speed ADS gearbox, the plant recommends filling the mechanical transfer case produced by UAZ OJSC with the same transmission oil as the box.

This is quite justified, since it is due to the fact that during operation, partial flow of oil from the gearbox to the transfer case is possible.

The oil level in the gearbox may drop by 8 mm. relative to the lower edge of the filler hole and will accordingly rise in the transfer case.

When the car is equipped with a Korean five-speed DYMOS gearbox, it is recommended to fill the mechanical transfer case with SAE 75W-90 gear oil according to API - GL-3.

Although there is no particular point in this, since oil from the DYMOS box also tends to flow into the transfer case, so it is more rational to fill both units with the same oil to prevent possible mixing of different oils.

Transmission oils for the front and rear axles of the UAZ Hunter and UAZ Patriot

In the crankcase of both axles, the manufacturer recommends using transmission oil SAE 75W-90 according to API - GL-5.

Transfer case service

When operating a vehicle, it is necessary to regularly service the unit. For this:

  • A visual inspection is carried out for lubricant leaks at the locations of gaskets and rubber seals;
  • The fastening of the transfer case to the gearbox and the tightening of the propeller shaft bolts are checked;
  • The lubricant of the product is changed.

The oil in the transfer case and gearbox is changed at the same time. Each car owner determines the frequency of replacement independently. The manufacturer recommends changing the oil every 35 - 45 thousand mileage.

REFERENCE: When regularly driving a car off-road, it is necessary to change the transmission oil more often. This is due to high loads and the possibility of water entering the crankcase of the mechanism when fording.

What oil is needed for an SUV

When initially refueling the ZMZ Pro Euro 5 engine, used on the Patriot since 2022, original oil of 2 grades is used:

  • synthetic Motor Oil Premium SAE 5W-40, SN/CF;
  • semi-synthetic Motor Oil SAE 10W-40, SL/CF.


Oils to replace.
Synthetic based fluid is recommended for severe operating conditions. The type of lubricant filled into the engine is indicated in the accompanying documentation. When servicing a car at an official dealer, the engines are filled with original material recommended by the manufacturer.

When purchasing a used car that has been serviced by the previous owner itself, it is difficult to determine the type and viscosity of the lubricant in the engine. The existing liquid is drained, and the cavity of the power unit is washed with special oil. Then fresh substance is poured in accordance with the plant’s recommendations.

An additional criterion for choosing oil is the climate zone in which the SUV will be operated. The selection of the base is carried out taking into account the maximum and minimum air temperatures in summer and winter. Synthetic materials are suitable for operation at low temperatures because they retain fluidity and facilitate the procedure for cranking the shaft with the starter. The list of lubricants acceptable for refueling a gasoline unit is given in the table.

Lubricant typeLower temperature threshold, °CUpper temperature threshold, °C
0W-30-3020
0W-40-3025
5W-30-2520
5W-40-2535
10W-30-2030
10W-40-2035
15W-30-1530
15W-40-1545
20W-40-1045
20W-50-1045

When using a synthetic-based fluid, knocking noise may occur from the hydraulic valve lash compensators installed in the gas distribution mechanism. The defect is observed on cars with mileage of more than 80 thousand km. New compensators allow the use of both synthetic and semi-synthetic oil. But the use of mineral-based lubricants is not recommended, since the design of the motor is not designed for the use of such substances.

The ZMZ 514 diesel engine (or the less common Iveco) requires the use of oils that meet the API CF-4 specification and higher. The lubricant container must contain an inscription confirming that the substance is suitable for use in diesel engines equipped with a turbocharger.


First oil change on a UAZ Patriot. The plant allows the use of substances with viscosity values ​​similar to those given in the table for a gasoline unit (with the exception of 0W-30 and 0W-40).

Antifreeze for UAZ.

The cooling system of the UAZ is rather large, with a volume of 14 liters during a full shift. Coolant G 11 is prescribed; blue high-quality antifreeze concentrate KFS 2000 is suitable here. It is diluted one to one with distilled water. Protects against corrosion. By the way, very often antifreeze leaks in UAZ vehicles, this is due to microscopic cracks in the hoses. This is usually visible when flexed. Often technicians cannot detect the problem and the cause, so use a cooling system sealant - a great thing, tested on yourself. Antifreeze leakage has become significantly less.

When replacing, be sure to flush the system to ensure that any corrosive deposits are removed; it is not always visible, but it is there.

Maintain your UAZ in accordance with our recommendations, and it will serve you for a long time. You will not spend time in services because of all sorts of problems, but will always be on the road and enjoy driving this great car. All elements that need lubrication will be reliably protected from wear. Good luck on the roads.

Let's start changing the oil

To change the transmission oil, you first need to acquire the following materials: two keys for 23 and 24, a technical container (the old oil will drain into it), a filling syringe, a new oil filter, new oil, rags, gloves.

The procedure for changing the oil in a UAZ Patriot manual transmission:

  1. We drive 10 kilometers to warm up the engine to operating temperature.
  2. We place the car on an overpass, or use a lift or inspection pit. In any case, it is necessary to provide full access to the bottom of the car
  3. We climb under the car and place a technical container. The waste will flow into it
  4. On the gearbox we find the oil drain plug, unscrew it with a 23 key, then observe the process of the used oil flowing out along with dirt and metal shavings
  5. Wait for the old fluid to drain. After making sure that the oil has been completely drained, tighten the plug, first cleaning it and the hole from dirt and soot. The copper gasket on the drain plug may have deteriorated. In this case, you will have to install a new plug
  6. Fill the box with new lubricant using a filling syringe. It is necessary to pour in a certain amount of liquid equal to 2.5 liters. You may need to add a little more oil later. So, let's put the plug in place. At this point, the process of changing the oil in the UAZ Patriot manual transmission has been successfully completed, and you can begin further operation of the car.

Procedure

The procedure for replacing lubricant in Patriot transmission units is not particularly complicated, however, it requires patience and attentiveness from the performer. To complete the work in full, you will need to drain the used fluid from each of the system components one by one, replacing it with new lubricant. For this purpose, it is first necessary to prepare new oil in a volume sufficient for replacement, a set of car keys, containers for used fluid, as well as work clothes.

The task of replacing fluid in transmission units is carried out from the bottom of the car. In service centers, special lifts are used to ensure unhindered access to drain openings; at home, it will be enough to drive the vehicle onto a pit or overpass.

Before performing the operation, it is important to drive an SUV for about ten kilometers so that the lubricant in the system warms up to operating temperature. Under the influence of temperatures, it will become liquid and will merge faster and better from the aggregates.

Further measures are carried out in accordance with the work schedule for each transmission unit.

Changing the oil in axles

The procedures for changing the oil in UAZ Patriot axles do not differ in execution technology, so let’s look at the procedure for implementing the tasks using the rear axle as an example. In practice, you can successfully perform a replacement by following simple instructions from the car manufacturer:

  1. Locate the drain and fill caps, which are located on the rear axle housing. First, you need to clean the surfaces adjacent to the openings with a metal brush from dirt to avoid it getting into the system.
  2. Next, unscrew the filler plug to relieve pressure, after which you can unscrew the cover of the drainage hole, having previously placed a waste container under it.
  3. While the oil is draining, the plugs must be thoroughly cleaned of metal shavings that may accumulate on the inside of the caps during operation of the machine. After the oil has drained, the oil drain plug is installed in place and clamped with the recommended force.
  4. Using a technical syringe, lubricant is poured into the oil filler opening until it begins to flow out of the hole. This procedure will require about 1.3 liters of oil, depending on the quality of the waste drain.
  5. Don't forget to tighten the filler cap.

The oil change in the front axle of a UAZ Patriot is carried out in a similar way, with the only difference being that the oil filler and drain plugs must be looked for on the front axle housing. The front axle housing will contain no more than 1.4 liters of lubricant. At this point, the procedure for replacing the lubricant in UAZ Patriot axles can be considered successfully completed. Then you can move on to changing the oil in the transfer case and gearbox.

Changing the lubricant in the transfer case

The methodology for changing the oil in the transfer case of a UAZ Patriot is practically no different from the procedure for changing transmission fluid in axles. To perform the procedure, you will need to find the drain and filler holes, clean the surfaces one by one from dirt accumulations and unscrew the filler plug. Then the waste is removed into the prepared container through the drain opening. Once the liquid has drained, you need to tighten the drain plug and fill the oil through the filling opening using a technical syringe to the limit, which will be a little more than two and a half liters in volume.

Along with changing the oil in the axles and transfer case, it is recommended to change the lubricant in the gearbox, the technology of which is the same as in previous situations. When pouring new oil into the gearbox, the level should be monitored using a special dipstick with which the car is equipped. After filling and running in the car, you will need to recheck the level in the gearbox; you may need to top up the oil to normal.

After replacing the lubricant in all transmission components, you need to start the car and drive it for several kilometers, after which you drive it onto the overpass again and check all the joints for fluid leaks, and if necessary, tighten the plugs more tightly.

Site about SUVs UAZ, GAZ, SUV, CUV, crossovers, all-terrain vehicles

The car manufacturer's recommendations for transmission oils for UAZ are discussed in the previous material at the link. And these recommendations undoubtedly must be followed, however, based on the operating characteristics of each individual vehicle, they can and even need to be amended within reasonable limits.

You just need to take into account that the use of oils of a lower category according to the SAE and API classification can lead to premature failure of units and, as a result, expensive repairs. At the same time, using a higher category of oils will be inappropriate, primarily for financial reasons, since they usually cost significantly more.

In order to operate with specific numbers and be able to clearly compare the quality characteristics of different oils, let’s take ZIC 75W-85, 75W-90, 80W-90, 85W-140 transmission oils as an example. Again, it is ZIC 75W-85 that is recommended by the factory for filling into the five-speed DYMOS gearbox.

Selecting transmission oil for the UAZ gearbox and mechanical transfer case.

Transmission oil must provide high-quality lubrication of gears and protect them from scuffing and wear. Therefore, both viscosity and a set of additives are important in its characteristics. Although, of course, in general, transmission oil in the gearbox and transfer case is much easier to work with than engine oil in the engine.

Perhaps the most balanced solution would be to use fully synthetic gear oil ZIC GF TOP 75W-90 of API GL-4/5 quality class in any UAZ gearbox and mechanical transfer case.

If for some reason it is not possible to use 75W-85 or 75W-90 oils at the moment, for example, you urgently need to change the oil in the gearbox and transfer case after a long swim of the car while wading, then it is quite possible to fill in semi-synthetic ZIC G-EP 80W- 90 according to API GL-4. The same oil can be used constantly and all-seasonally for areas with a temperate climate and not very frosty winters.

High viscosity gear oil, such as 75W-140, 80W-140 or 85W-140, is preferable only for areas with very hot climates, and then only if it has an API classification of GL-4, but not GL-5.

Oil of category GL-5 according to the API classification is intended for heavily loaded high-speed hypoid gears; its enhanced extreme pressure and anti-wear functions are ensured by the presence of an increased concentration of additives based on sulfur and phosphorus, which are aggressive towards non-ferrous metals from which gearbox synchronizer rings are made.

Selecting transmission oil for UAZ axles.

With oil for the front and rear axles, everything is somewhat simpler. For their gearboxes with hypoid gears, in all cases, only gear oil of API category GL-5 is suitable, since oil of a lower category will not be able to protect the teeth of the hypoid pair from scuffing and premature wear.

As for the 75W-90 viscosity transmission oil recommended by the factory for all-season use in axles, deviations are possible here. For example, when actively using a car off-road, when after mud or fording, almost after every trip you may need to change the oil in the axles, it is much more financially profitable to fill them with cheaper ZIC G-5 80W-90 according to API GL-5 , and not ZIC GF TOP 75W-90 according to API GL-4/5, although it has more universal characteristics.

As well as for gearboxes, all-season use of high-viscosity transmission oils such as 80W-140 or 85W-140 in axles will be advisable only for areas with a predominantly hot climate, in terms of pour point * such oils are not very suitable even for mild winters.

As a generalized conclusion from everything written above.

Transmission oils for gearboxes, mechanical transfer cases and UAZ axles, on the one hand, must maintain high viscosity at operating temperatures in order to form a stable oil film in friction pairs, and on the other hand, not become too viscous at negative ambient temperatures for so that when the transmission units start operating, cold oil does not interfere with the rotation of the gears.

The choice of a specific gear oil manufacturer depends primarily on personal preferences and financial capabilities, so there is no point in advising anything on this matter.

* — Notes and explanations to the text.
Kinematic viscosity of transmission oil.

Characterizes the degree of oil fluidity at operating temperatures. For practical purposes, the most important is the kinematic viscosity at a temperature of plus 100 degrees. This conditional temperature is closest in value to that which occurs under optimal operating conditions in the crankcases of transmission units and in the areas of the main friction pairs.

A kinematic viscosity value that is too low or, conversely, too high, outside the permissible values, negatively affects the operation of the transmission as a whole. For example, transmission oil with low viscosity better penetrates into the gaps between rubbing surfaces and cools them, but if the viscosity is below the permissible value, the oil is squeezed out of the friction zone and this leads to accelerated wear of parts.

Transmission oil with a viscosity higher than acceptable can create increased rotational resistance, cause an increase in operating temperatures and increase crankcase pressure, which can ultimately lead to oil being squeezed out through the seals.

Viscosity index.

A conditional indicator characterizing the degree of change in the viscosity of transmission oil depending on temperature. The higher the viscosity index in numerical terms, the wider the temperature range for which the oil can be used.

All other things being equal, this means that when overheated, oil with a higher viscosity index thins out more slowly and does not lose its lubricating properties longer, and when cooled strongly, it thickens more slowly, maintaining lubricating properties at low temperatures.

What oil is better to fill in UAZ Patriot

The documentation for the vehicle always indicates consumables and their modifications that should be used for replacement. Experienced mechanics do not recommend relying on the advice of a manager at a car shop on purchasing oil for a UAZ engine.

In general, for long-term operation of UAZ Patriot engine parts, semi-synthetic oil with the following parameters 5W30 is poured into it. This lubricant is suitable for both harsh winters and hot summer seasons. It does not turn into a viscous viscous liquid or become too thin after a run of 1000 kilometers.

Of course, many will say that the best lubricant would be 0W40, but it is expensive and not everyone can afford it. By the way, fully synthetic oil is not poured into an engine that has traveled more than 100 thousand kilometers. Despite the fact that synthetics have better parameters and properties that protect the UAZ Patriot engine from premature wear.

For example, when using a synthetic lubricant with a mileage of more than 100 thousand kilometers, the car owner may notice that there is a knocking sound from the hydraulic compensators. However, the use of mineral-based oils is not recommended at all. Since the engine is not designed to use mineral lubricants. Therefore, semi-synthetics are always suitable for engines such as ZMZ 409.

The manufacturer of this type of oil should be chosen from both foreign and domestic companies. The main thing is not to fall for a counterfeit lubricant. Since the oil performs the main function of protecting the engine from overheating and rapid wear of the mechanical parts of the engine.

If we consider lubricant brands in more detail, the leading ones are:

First of all, pay attention to oils from these companies. https://www.youtube.com/embed/PkyNc2cDNko

Engine capacity for oil filling

The crankcase capacity of the ZMZ 409 gasoline engine is 7 liters. When replacing fluid, not the entire volume of lubricant drains from the pan, so 6.2-6.5 liters of the substance is enough to fill. Some of the oil is poured into the filter cavity, which must be changed during annual maintenance. Saving the old filter element is prohibited, since it does not ensure that the lubricant is cleaned of wear products.

ZMZ 514 diesel engines use a reconfigured sump designed to hold 6.5 liters of liquid (about 6 liters of lubricant will be required for refilling).

When is replacement necessary?

The frequency of oil changes in each transmission unit is regulated by the manufacturer in the user manual. For cars that have just left the assembly line, the first change of transmission fluids should be performed no later than after five thousand kilometers traveled. Such a short interval is explained by the fact that after assembly, new structural parts are rubbed against each other during the running-in procedure, during which there is a possibility of the formation of small metal particles, the presence of which can negatively affect the operating life of the components and the machine.

Further changes of the emulsion in the gearbox, transfer case and axles are regulated by the manufacturer at intervals after every thirty thousand vehicle miles. It should be understood that the interval between procedures may vary depending on how high-quality the product is poured into the transmission, as well as on the operating conditions of the vehicle.

VESKO-TRANS.RU

AutoNews / Reviews / Tests

How much oil is in the box of UAZ 469

Technical characteristics of the UAZ 469 car

Russian SUV is still popular

The UAZ 469 SUV, which first appeared in our country in the 70s of the 20th century, was the best Russian jeep for a long time. Thanks to its high reliability, ease of on-site operation and low cost, this unpretentious workaholic is still the standard for many people.

Really, in what other car can you fill a cloudy brown liquid called A-72 gasoline with used motor oil instead of brake water, and then control the entire country without killing the engine and brake system. Transmission fluid for Renault Logan The technical characteristics of the UAZ 469 are unique; they allow this jeep to be operated according to criteria that would kill at least some other car.

Goats have their drawbacks: a canvas canopy instead of a regular roof and a weak oven that causes people to click their teeth during winter travel. Answer to the question: how much oil is in the gearbox on a 16-valve VAZ-2112. How much oil should I add when changing? Changing the oil in a UAZ pump is a matter for motorists. But they are more than offset by the fact that you won't get stuck on the road in a snowstorm and freeze to death.

Changing the oil in axles. — logbook UAZ Patriot Baby Patrick 2008 on DRIVE2

And so, I got to the bridges, or rather to changing the oil in them. I also needed to find out the reason for the large idle rotation of the flange, about 90 degrees, of the front axle in which the self-block is installed. The previous owners had no idea what company it was. I drove the car into a warm box, unscrewed the drain and filler plugs on the front axle and saw what was inside.

This kind of oil, or rather an emulsion, was in the front axle. Clear signs of water getting inside the bridge.

While the remaining oil was draining, I opened the diff cover, but to my regret I didn’t find anything terrible there, the gap between the main pair of gears is minimal and almost not felt, the bearings are also free of play, but all the free play is on the axle shafts and their drive in the self-locking unit. In other words, the reason for such idle speed lies in the design of the self-block, I realized this when I looked at the cross-sectional photo of the self-blocks and their operating principle. I didn’t take a photo because there’s nothing to see there, I replaced the gasket and put the cover back in place. And while I was putting the cap on the front, the oil was draining from the rear axle, the situation with the oil there was similar, it was also gray.

When the old oil stopped dripping from the bridges, I started pouring new oil.

Of course, I overpaid a little with the oil, in another store the same thing costs 100 rubles less, but the seller is a wooden consultant, unlike the store where I bought the oil. In total, I spent 1.25 liters on the rear axle, and approximately 1.4 on the front axle. I filled until the moment when oil began to flow from the upper filler hole; in fact, it is also a level indicator.

In total, 3 liters of oil were purchased for 1000 rubles per liter, a cover gasket for 110 rubles and sealant for 100 rubles.

PS before the replacement, a slight hum was heard from the rear axle, after the replacement I still don’t understand it due to slush on the road, it’s just not audible. Next in line is changing the oil in the gearbox and transfer case.

Price: 3,210 ₽ Mileage: 161,500 km

Choosing oil for manual transmission Dymos - Factory Answer

Bobik has been parked for a month now due to gearbox repairs, I will make a separate report on this. In the meantime, I’m sitting here racking my brains about how to eat the whole world without taking off my tie. I've been scouring the Internet for about 4 days now, looking for oil. Even in ZIC I got confused. They have regular oil and I didn’t understand the essence of the “first fill” one bit. In addition, I wanted something in a hot climate, because driving in winter at above-zero temperatures cannot be considered winter driving. Then I got bored and wanted to talk to someone competent, I understand that the idea is shit, but I decided to talk to the factory? To my surprise, the idea really sucks...

Help with oil for manual transmission Petr Vladimirovich To whom

17006215 Tatyana Mikhaylova To: “***********@mail.ru”

June 29, 15:46 Dear Peter, hello!

In response to your request dated 06/29/17.

If there are faults in the vehicle you are using, we suggest you make an appointment for repairs at the nearest authorized UAZ service center that is convenient for you, and notify us of the agreed date for the visit in any way convenient for you: through the UAZ Hotline or using the feedback form on the official UAZ website www.uaz .ru/. Any questions regarding the status of repairs are resolved after inspecting the vehicle at authorized service stations. Upon receipt of your notification of the agreed date for the visit, our technicians will remotely join in inspecting and assessing the repair of your vehicle.

You can find a complete list of authorized UAZ service stations on the official UAZ website in the “Service Stations” section www.uaz.ru/purchase/dealers/ or contact the UAZ Hotline operator by phone.

Sincerely, Mikhailova Tatyana Vasilievna

Customer Service Specialist

Hotline "UAZ"

Let's summarize: I'm standing on the asphalt wearing skis... If anyone has any thoughts about the choice of oil, you are welcome to comment.

Source

Features of transmission, chassis and control systems

The unique characteristics of the UAZ 469 are largely due to the successful design of the transmission. This vehicle system consists of a dry single-plate clutch, a gearbox, a transfer case, a rear drive axle, a front axle, and wheel drives for an army modification of an SUV.

Technical characteristics of the gearbox:

  • type - 4-speed, manual;
  • synchronizers - in 3rd and 4th gears.
  • 1st gear - 4.12;
  • 2nd gear - 2.64;
  • 3rd gear - 1.58;
  • 4th gear - 1.00;
  • reverse gear - 5.22;
  • gearbox weight without lubrication - 33.5 kg;
  • The volume of oil in the gearbox is 1 liter.

Transfer case specifications: 2-speed, manual.

  • direct transmission - 1.00;
  • low gear - 1.94;
  • power take-off - up to 40%;
  • weight with hand brake, without lubrication - 37.4 kg;
  • the volume of oil poured is 0.7 l.

Cardan transmission - 2-shaft, open.

  • front - 2-hinge, combined;
  • front shaft weight - 6.9 kg;
  • rear - 2-hinged, tubular;
  • rear shaft weight - 8.25 kg.
  • type - detachable, with gearboxes on all wheels;
  • gear ratio
    — 5,38;
  • final drive ratio - 2.77;
  • gear ratio of wheel gearboxes - 1.94;
  • front axle weight - 140 kg;
  • rear axle weight - 121.5 kg;
  • the volume of oil
    poured into each bridge is 1 liter;
  • the volume of oil
    poured into each wheel gearbox is 0.3 liters.
  • type - detachable;
  • ratio
    - 5.13;
  • front axle weight - 120 kg;
  • rear axle weight - 100 kg;
  • the volume of oil
    poured into each bridge is 0.85 l.

You can distinguish military bridges from collective farm ones in the photo by the conical cap on the splined flange and the double final drive.

  • suspension - rigid, leaf spring;
  • springs - 7-9 leaf, elliptical;
  • shock absorbers - telescopic, double-acting;
  • wheels - steel, stamped;
  • tires - tube;
  • The recommended tire size is 215/90 R15.
  • mechanism - worm type;
  • gear ratio - 20-21;
  • the volume of oil to be filled is 0.25 l.
  • type - hydraulic, drum;
  • parking brake - transmission;
  • liquid volume - 0.52 l.

In general, the control systems of the UAZ 469 are reliable and durable.

The gearbox on every car is an important component of any vehicle, so its serviceability is an important factor. The SUV also has a gearbox, thanks to which it is possible to move at different speeds. In addition to the main parts, the gearbox is filled with oil, which requires periodic replacement

In this material we will pay attention to the process of changing the oil in the gearbox on a UAZ Patriot. How to change the oil, when it is needed and what determines this period

Engine used

The equipment of this type is equipped with an extremely reliable, productive engine of the ZMZ-4091 type. It has the following main characteristics:

The engine is controlled by a complex microprocessor system.

It is partly thanks to this that the operating mode is maintained, making it possible to spend a minimum amount of fuel even under heavy load. In addition to controlling injection, this system works with engine ignition.

The crank mechanism of this engine consists of the following main structural elements:

Each piston has a pair of compression rings, as well as one oil scraper ring.

The piston itself is made of aluminum casting.

There is a ring insert, thanks to which thermoregulation is carried out. The special skirt is shaped to minimize power loss due to friction.

Engine lubrication system - combined

. It makes it possible to supply oil to friction surfaces under high pressure by spraying.

The gas distribution mechanism is particularly durable: this is due to the reliable materials used for its manufacture.

Thus, cast iron camshafts are made of cast metal. An alloy steel chain is used to drive the camshafts. All valves are made of heat-resistant metal and can rotate during operation.

The likelihood of them burning out is extremely low, which makes it possible to save time and money on repairs.

A liquid cooling system is used to remove heat. It consists of the following main elements:

Antifreeze of any brand, as well as ordinary water, are suitable as a coolant.

Changing the oil in the front axle of the UAZ Patriot

According to the manufacturer's recommendation, it is necessary to replace the heated lubricant. To do this you need to drive 4–6 kilometers. Warm grease has a thinner consistency and flows out of the drain hole faster. At the end of the movement, the lubricant is replaced as follows:

Install the UAZ Patriot on a pit, lift or overpass. The site must be level, without a side slope;

  • Immobilize the vehicle. To do this, shoes are installed under the wheels;
  • Prepare a container for collecting waste material. The container volume must be at least 2 liters. To facilitate the process, it is necessary to select a container with a large neck;
  • Unscrew the filler plug. This is necessary to supply air to the bridge cavity. If there is insufficient air in the cavity, a vacuum is formed. The plug is located below the middle of the crankcase;

  • Unscrew the drain plug. It is located at the bottom of the crankcase. The plug is unscrewed counterclockwise. To open, a 12 mm hexagon is required;
  • Clean the plugs from oil accumulations, dirt and metal shavings;
  • Screw in the drain plug until it stops;
  • Fill with new lubricant. The filler neck is located at the top. You need to fill in the lubricant using a specialized syringe;

Screw the filler cap until it stops.

Capacity of UAZ fuel tanks

The question that many people are interested in about the volume of tanks will not go unanswered. The volume of the fuel tank on each side on the UAZ Patriot is 38 liters, however, as mentioned above, slightly more fuel can be filled into the tanks, this is available due to the fairly capacious and long so-called neck, drawn from the filler plug. It is due to this that the volume increases. Oddly enough, but taking into account such design features, then approximately in each of the available tanks you can fill about 43 liters of diesel fuel or gasoline.

So, if we take into account that the volume of the fuel tank on each side is 38 liters, then the entire system is filled with 86 liters. We cannot agree that this is an excellent addition, since the UAZ always needs a large displacement of fuel due to its rather high consumption. Naturally, fuel consumption is not critical, otherwise no one would buy such cars.

In general, the fuel system has only one, but significant drawback. We can immediately make a reservation that this cannot be called a disadvantage, but nevertheless. This is exactly the same fuel pumping mentioned above. Fuel transfer is a process that always and continuously refills the right tank. And if we consider the situation, if for some reason the right tank is damaged, then due to the pumping system the fuel loss will be even greater. Therefore, many UAZ Patriot car owners complain about the lack of a button on the dashboard, with which the driver can at any time disable or enable the transfer of fuel from one tank to another.

UAZ Patriot refueling tanks

The design of absolutely every modern car necessarily requires the presence of a power plant, tank, gearbox, and other units and various parts that have their own volumes. It is in these same volumes that diesel fuel is placed, as well as brake fluid, of course, gasoline or antifreeze, but all the fluids listed for each individual model are individual. We invite you to learn in detail about the filling tanks on the UAZ Patriot, which is popular in our country, plus we’ll look at what they essentially are and how much this car model requires to fill certain mechanisms.

What are the components?

Refill tanks are units that contain working fluids. They periodically require replacement or refueling, just like with a gas tank. By the way, the UAZ Patriot SUV is equipped with two refueling tanks, which allows you to increase the amount of fuel to be filled to almost 80 liters. Few cars of this class can afford such a gas tank design.

Refill volumes include the following devices, mechanisms and parts:

UAZ Patriot, as well as other vehicles similar in design and having similar mechanisms, necessarily has the refueling volumes listed above, presented in the form of plastic tanks or located directly in the units themselves. It is in these devices that the filling fluid for a particular mechanism is located. These liquids include the following:

Patriot refueling volumes

UAZ Patriot refueling parameters correspond to the following values:

  1. Fuel tanks. The left gas tank holds up to 36 liters of liquid fuel. According to the data in the instructions, the right tank has the same volume. Actual figures may slightly exceed those stated. This means that 1-3 liters more fuel can be filled into the tanks.
  2. Engine lubrication system. The volume of this element is 7 liters. The lubrication system of the UAZ Patriot 31631 holds only 4 liters of oil.
  3. Engine cooling and interior heating system. The tank can be filled with 12 liters of coolant. The radiator volume with longitudinal pipes reaches 14 liters.
  4. Manual transmission. The capacity of this unit is 2.5 liters.
  5. Transfer system housing. The tank volume of this part of the car is 800 ml.
  6. Rear and front axles. The capacities of these SUV elements differ from each other. The front axle holds up to 1.4 liters of oil. The volume of the rear element is 1.5 liters. The actual capacity of the rear axle housing is slightly higher than stated. Filling with more oil will help maintain the functionality of this unit. All working parts of the system must be immersed in lubricant.
  7. Hydraulic power steering column. For most modifications of Patriot cars, this figure is 1.1 liters. The power steering of the UAZ-31631 holds 1.3 liters.
  8. Steering gear. The capacity is 250 ml. The volume of the brake mechanism is 0.6 l.
  9. Window washer tank. Up to 5 liters of liquid are poured here.

The shock absorbers (0.3 l) and clutch drive (0.18 l) have the smallest capacity. The owner must be familiar with all the parameters of filling containers. The necessary information can be found in the user manual.

Characteristics of the UAZ 469 engine

TypeGasoline, 4-stroke
LocationFront, longitudinal
Cylinder arrangementRow
Number of cylinders4
Operating procedure1-2-4-3
Cylinder diameter92 mm
Piston stroke92 mm
Compression ratio6,7
Power75 hp
Working volume2.5 l.
Torque166.7/2200 n*m
Supply systemCarburetor
Number of valves per cylinder2

It’s worth looking in more detail at gasoline consumption: With a reference consumption of 10.6 liters on the highway, the average gasoline consumption of the UAZ 469 is about 10.75/l. 100 km along the highway. And the maximum off-road gasoline consumption is approximately 17.25 liters. At 100 km.

DIY replacement instructions

The list of tools used for topping up is supplemented with a container for collecting waste liquid. Before starting work, the machine is brought into the inspection hole. Before changing the oil, warm up the car, using it for its intended purpose for at least 15 minutes. This promotes liquefaction and easy removal of waste. The replacement is done like this:

  1. Place a container under the bottom to drain used oil from the transfer case. Using a wrench, unscrew the plug located in the lower part of the crankcase. Unscrewing the fill valve speeds up the waste removal process.
  2. Wait for the liquid to drain and screw in the drain plug. Before installation, the part is cleaned of dirt.
  3. Lubricant is injected using a syringe. Filling oil with a watering can will not work. A technical syringe copes with this task better.
  4. Once the desired level is reached, the filling is stopped. The plug is returned to its place.

The work is completed by turning on the engine, which promotes uniform distribution of lubricant.

Features of changing gearbox oil

One of the types of UAZ Patriot gearbox repair is replacing transmission fluid

It is important to remember that when this procedure occurs, it is not recommended to mix oils of different classes. This will lead to a reduction in the life of the box

The algorithm for changing the oil in a Patriot gearbox looks like this:

  1. The engine warms up to operating temperature.
  2. The UAZ must be driven into the inspection hole.
  3. An empty container is placed under the box where the waste liquid will drain.
  4. Use a key to unscrew the filler plug.
  5. Use a wrench to unscrew the drain plug.
  6. As a rule, the plug has contamination that needs to be removed; in some cases it needs to be replaced.
  7. New transmission oil should be added to the UAZ gearbox through the oil filler hole. In this case, it is worth using a refill syringe. It should be poured into the box in small portions.
  8. The UAZ gearbox has a dipstick. With its help you can control the oil level in the gearbox. If there is a deficiency, liquid is added.

This procedure does not cause any difficulties. That is why many decide to implement it on their own. This helps save money.

Operating parameters and price

UAZ "Farmer" 39094 has outstanding technical characteristics:

Important! A special feature of this car is the brake system it uses - with a vacuum booster. Moreover, brake drums are installed both front and rear.

This allows you to be sure that the car will be able to stop as quickly as possible, even in unfavorable road conditions.

The gearbox in the UAZ-39094 is only mechanical.

, four-speed (plus one reverse speed). Tires recommended by the manufacturer are 225/75R16.

This rubber model allows you to load the maximum possible amount of cargo into the car body without fear of damaging it.

A large number of other vehicles, but more specialized ones, are also produced on a similar base to the UAZ-39094. The following modifications are possible:

The cost of the UAZ-39094 “Farmer” depends on the condition of the body, as well as the year of manufacture and mileage:

NameYear of issueMileage, kmCost, rub.
390942015549 000
390942006120 000250 000
390942007100 000320 000
39094201350 000380 000
39094201245 000350 000

The main features of this car include the following:

How much oil to pour into the axles and transfer case of the UAZ Patriot

First generation 3163, since 2005

UAZ Patriot is an updated version of the Simbir. After modernization, the car became more comfortable and easier to handle. In general, the car became more “civilian”, but still had disadvantages in comparison with foreign analogues. The SUV borrowed the body, Spicer-type axles and ZMZ engines from Simbir. Today, the top-end version of the Patriot is equipped with an upgraded ZMZ Pro with a capacity of 150 hp. s., aggregated with a six-speed automatic transmission from the BMW 3 Series. In addition, to increase reliability, the car is made from a large number of foreign components: a Takata-Petri AG steering wheel (Germany), a Sanden air conditioner (England), a Dymos gearbox and Dawnsco seats (Korea), a Delphi power steering (Italy), etc. .

  • Transfer case oil: volume – 0.7 liters, tolerance and viscosity: API-GL-3-4, TSp-15K. TAP-15V, TAD-17I; SAE 75W-90
  • Rear axle gearbox oil – 1.4 liters; front - 1.5 liters; tolerance and viscosity: API-GL-3-4, TSp-15K. TAP-15V, TAD-17I; SAE 75W-90

Overall dimensions of UAZ 469

UAZ 469UAZ 469B
Body typeSteel frame body, open, station wagon
Number of doors5
Number of seats7
Length4025 mm.
Width1805 mm.1785 mm.
Height2050 mm.2015 mm.
Base2380 mm.
Ground clearance (clearance)300 mm.220 mm.

Let's sum it up

UAZ Patriot transmission units are designed to operate in aggressive operating conditions, and therefore are characterized by increased endurance. Despite this, their operational period directly depends on the owner’s compliance with the regulations for their maintenance. Irregular oil changes or completely ignoring them can cause vehicle failure, reducing its handling, maneuverability and safety on the road.

It is not difficult to carry out routine maintenance of axles, transfer cases and gearboxes at home, but it is advisable to replace the transmission oil in all components, which, on the one hand, will allow you not to get confused about the timing of re-replacement, and on the other hand, will extend the life of the car. And, most importantly, do not skimp on the quality of the lubricant; the operational period of components, assemblies and the vehicle as a whole depends on this.

Weight and dimensions

Despite its excellent spaciousness, as well as a large number of passenger seats, the UAZ-39094 has relatively compact dimensions:

At the same time, the wheelbase is 2,550 mm, ground clearance is 220 mm.

Thanks to this, as well as the four-wheel drive, this vehicle is perfect for moving through the countryside, fields and country roads covered with ruts from tractors and KamAZ trucks.

If necessary, the UAZ-39094 can even ford through small rivers, but the depth should not exceed 50 cm.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]