Window closer Vesta, SW, Cross, XRay (1.6 and 1.8) from 2015 - Pandora

September 01, 2017 Lada.Online 65 012 33

One of the popular accessories among car enthusiasts is a window closer. This unit allows you to automatically raise the windows when the door locks are closed. Let's look at the features of self-installation and connection of the door closer on Lada Vesta.

This instruction uses the Zeepin universal door closer, which costs about 500 rubles (available in the AliExpress catalog).

You can buy a MAX-2 glass closer for Lada Vesta with delivery throughout Russia in our online store.

Attention!

Closers have different wiring diagrams, so compare the wiring diagram carefully. You perform all actions at your own peril and risk.

Other little-known functions of the Lada Vesta car

In addition to the functions described above, you can change other parameters in Vesta. This will increase the comfort of operating the machine and working with its systems.

MMS shortcuts can be dragged and dropped

The media screen has various shortcuts. They can be installed at your discretion. You need to click on the shortcut and hold it there for a few seconds, after which it will be highlighted and you can move it.

Separate heated windshield

Heating is activated without using maximum airflow by pressing the “Defrost MAX” key on the heating system control. After this, press two buttons at once - “Defrost MAX” and with the image of a person and the glass heating icon (both keys are located vertically opposite each other). After this operation, the glass heating operates separately from the climate system fan and functions as before.

Fuel tank hatch hook

Almost every gas tank flap of the new LADA model has a small hook on the bottom. It is made in the form of a small protrusion and is designed to engage the cap while refueling the machine.

“Nychka” in the trunk of a Lada Vesta station wagon

Vesta's trunk has a well-thought-out organization of space. It has many pockets, hooks and niches. The cigarette lighter for connecting electrical appliances and side lighting are located separately. However, there is one closed niche that few people know about. It is located on the left side on a large ledge - this is a small shelf that is removable, there is a small space under it. It is worth noting that removing it is quite difficult and must be done carefully so as not to damage the plastic latches.

Characteristics of the automatic door window lifting module

First, let's look at the main characteristics of the module. A window closer is a device designed to automatically close the windows in a car after setting the car to an alarm system. Thanks to the use of such a module, the driver does not have to worry about forgetting to close the windows in the car.

Module board disassembled

Principle of operation

The module block itself for 2 or 4 windows is connected to the control unit for the anti-theft system and power windows. In particular, this unit is mounted between the electric motor and the power window control buttons. That is, the use of door closers is only possible in vehicles equipped with electric windows.

We recommend: Full decoding of car tire markings

As for the operating principle itself, it is identical for all closers. Voltage is supplied through the block and supplied to the electric motor. The closers themselves are never used when opening and closing the windows if the car is not set to an alarm. But when the anti-theft installation is activated, a signal from the unit is transmitted to the device itself, as a result of which the electric motor begins to be powered and raise the windows.

If we are talking about a multifunctional system, then it can also perform the following functions:

1. With the help of such closers, you can control several glasses either in one or in different directions.
2. The function of automatically returning the windows to a certain position can be activated if the alarm was activated no more than two hours ago.
3. If the anti-theft system is activated, the door closer will automatically block the power window button.
4. It is possible to configure the controller to work with various types and designs of lifts.
5. In addition, if necessary, the owner of the multifunctional system will be able to additionally connect several buttons to control the power windows (video author - AvtoGSM).

Kinds

Closers for two or four glasses can be either multifunctional or designed to perform one task.

1. The first, in addition to closing the windows, when the anti-theft system is activated, can remember the location of the windows, and after removing the car from the alarm system, they will return them to their original state. In addition, it is possible to return the system to its original position if there are obstacles during closing. The module can also be equipped with additional functions. The car owner has the ability to disable or configure the functionality if necessary. Of course, a module for covering four glasses will always be cheaper than one for two. But it is necessary to take into account that most of the options in fact may simply turn out to be unnecessary for the car enthusiast.
2. The second type is simpler. It is intended only for closing window glass, and such options are not equipped with additional functions.

Diagram for installing the unit in a car

Peculiarities

Now let's move on to the features. The complexity of installing the system may be due to the connection of the module to a larger number of doors, as well as the presence of other functions. For example, a module for closing only two windows can be installed by virtually every car enthusiast, even if he has no experience in carrying out such work.

If the vehicle has only one component installed on the driver's side that provides the functionality of the windows on the passenger door, then the module is mounted on it. If the system itself is divided or the control buttons are located on the center console or in the tunnel, it is advisable to install it under the dashboard. If the windows do not rise well from the button, then the closer may not completely close the glass, the load relay in it will trip and it will turn off - so we repair and lubricate the window regulators (video author - Lone Vagrant).

We recommend: What is the difference between iridium and platinum spark plugs?

Types of compatible window regulators

One of the most common models on the aftermarket is the window regulator for the Priora Forward. This model of electric lift is made in a combined arrangement of the drive and the actual rack-and-pinion lifting mechanism, compactly combined with the glass guide. Lifts of this model are characterized by increased reliability and ease of installation on Priora.

Garnet is the second most popular system. Under this name there is not even a single model, but a whole family, each modification of which is intended for a specific car. The mechanism is also rack and pinion type and has earned many good reviews from car enthusiasts. This type of lifts is characterized by uninterrupted operation, fast speed of raising/lowering the glass, and low noise.

It has already been said above about glass closers. In the luxury package they are available on all doors, but their performance leaves much to be desired. It is necessary to resort to replacement with other similar devices. One of the available alternatives is the Master system. It allows you to automatically raise the windows when the anti-theft system is turned on, and even control them within half an hour from the moment the ignition is turned off. The device itself looks like an electronic board with connectors connected to the standard Priora wiring.

Do-it-yourself installation of glass closers on a VAZ

The closer is designed to work together with a car alarm or other device that has a special output on which a pulse, negative or positive polarity, appears when the state of the system changes (for example, when arming).

To begin the installation, you need to check whether the car windows open and close with the buttons when the ignition is off; if not, then you need to find in the fuse block the relay responsible for opening and closing the power windows, remove it and install a jumper in its place as shown in the photo. Without this jumper, the window closers will not work.

Fig.1. Mounting block of fuses and relays for a VAZ 2114 car

Fig. 2 A jumper instead of a glass lift relay is a guarantee that your glass closer will work.

After the preparatory stage, remove the driver's door trim (the passenger door trim remains in place)

Fig.3. We remove the driver's door trim to install the door closer.

And install the closer on the car door as shown in the photo.

Fig.4, Fig.5. Installing the door closer module on the driver's door

Let's look at the installation diagram for door closers.

Fig. 6 Window closer connection diagram

Fig.7. Comments on the glass closer connection diagram.

And the wiring diagram of your car (as an example, the door closer was installed on a VAZ 2114 car, we are only interested in the fragment with the window lifts themselves and look.

Fig. 8 A fragment of the electrical equipment diagram of the VAZ 2114 car, only the side of the electrical equipment from the driver's door is shown.

{banner_x}

We connect the red wire with a 25 A fuse to + 12V, to do this we connect it to the white wire with a black stripe on any of the driver’s door buttons, see photo.

We connect the black wire to the ground of the car. Or bluntly to the black wire, because it connects with the mass.

We connect the white/yellow wire and the yellow wire to the central locking system of your car.

We are looking for the wire responsible for opening the power windows of the driver and passenger doors, and connect 4 wires to them in a gap.

“Break connection” means that the wire is cut in half and the connection is made from the button side and the motor side.

We cut the orange wire in half and connect the wires from the closers to it from the button side. On the button side it is green with a black stripe, and on the motor side the window closer wire is green.

We cut the blue one with the black stripe in half and connect the wires from the closers to it on the button side. On the button side it is blue with a black stripe, and on the motor side the window closer wire is blue.

We carefully solder and insulate all connections.

We assemble the door trim and use door closers.

Alexander Borisov, Samara

How to install a window regulator on a VAZ 2107 with your own hands step by step?

In general, installing power windows on the “seven” is not so difficult; the process is completely simple and understandable.

My first car was a VAZ 2107, I did this work a couple of times, and on my own.

Before installing new window regulators, you must remove the old ones.

I’ll say right away that the window lifters on the “seven” are equipped with an additional tension wheel (roller), if you removed the window lifters on the “Zhigulevskaya” classic, then remember that there are three rollers, in the “seven” there are four of them, because the glass configuration is different (there is no so-called “window window” ).

Open the car door.

Now we need to remove the lift handle (under the decorative trim there is a lock washer, we use a screwdriver with a flat blade).

The handle has been removed (the glass should be lowered all the way down), now we remove the decorative trim (it is on plastic latches, we insert a screwdriver and snap it off without much effort or fanaticism.

That's all we have before us is the window lift mechanism.

We pick up a key for ten (as far as I remember), we need to unscrew the bolt that secures the tension roller, loosen it

Now you need to remove the fastening mechanism, you need an eight key, you will see three nuts, they are located in the area where the window lifter handle is attached (a sleeve with slots).

The glass that we lowered earlier, now we need to lift it a little and remove the entire window lift mechanism.

Installation is in reverse order, here are just a few tips, be sure to lubricate the window lift cable before installation.

Don’t forget to tighten the window lift cable using a tension roller, pull it all the way, secure it with a nut and check the entire mechanism for functionality (the glass should go down and up smoothly, without any “brakes” or sudden movements.

www.remotvet.ru

What to do if the window closer does not work

"Dial" mode on a multimeter

Sometimes situations arise when the window closer module stops working. Unfortunately, its repair is hardly possible, and if it fails, it is more advisable to buy and install a new one. Especially considering its low price. However, before making a “fatal” diagnosis of the device, still try to check the operation of the entire circuit.

First of all, it is necessary to “ring” the power and signal wires in order to determine their integrity. This can be done using a tester. Remember that a standard passenger car's electrical system operates at 12 VDC. Therefore, the device must be turned on in the appropriate mode (in the English abbreviation, direct current is denoted as DC). To “test” the wires, the multimeter is set to the resistance measurement mode or to a mode specially designed for this (on models equipped with an audio speaker, it is indicated by the image of a musical note, sound waves or speaker).

Checking the fuse

There are two ways to check the fuse - by measuring the voltage in the circuit or its resistance. In the first case, the algorithm of actions will be as follows:

Checking the fuse with a multimeter

1. Set the multimeter to direct voltage (DC) measurement mode with a limit of about 20 V (depending on the multimeter model).
2. Turn on the ignition.
3. With one probe we touch the “incoming” contact (to which the “+” comes from the battery), and with the second we touch the “ground” in the fuse box or simply the body of the car.
4. If there is voltage at the “incoming” contact, then on the multimeter screen you will see a voltage value of 12 V (it can fluctuate within 2.3 V in one direction or the other). If there is no voltage at the “incoming” contact, then you need to look for an open circuit from the fuse box to the battery.
5. If voltage comes to the fuse, then you need to check the “outgoing” contact. To do this, touch it with one probe and touch the “ground” with the other. If there is voltage, then the fuse is intact, otherwise it is broken.

Checking the fuse by measuring resistance is performed according to the following algorithm:

1. Set the multimeter to resistance measurement or “continuity” mode (the second mode is preferable, but it is not available on all multimeter models).
2. With the ignition off, remove the fuse from its seat.
3. Touch one fuse contact with one probe, and the other with the other.
4. If the fuse is intact, then the resistance value will be 0; in the “dialing” mode, the multimeter will beep. If the fuse is blown, then the resistance value will be equal to infinity, and in the “dialing” mode there will be no sound signals.

If the fuse housing is made of transparent plastic, you can assess its condition visually. In a working fuse, the wire inside will be intact, but in a failed one, it will be broken.

Checking the circuit

If the fuse is intact, then you should check the power circuit behind it. In this case, it is impossible to give unambiguous recommendations, since everything depends on the specific model of the closer, the method of wiring, the model of the machine, and so on. First, you must visually inspect the integrity of the insulation and the wires directly that go from the closer unit to the electric window drive. You need to inspect carefully, especially in places where the wires are tied into bundles with plastic ties, as well as at their bends. Check if any of them are frayed.

If a visual inspection does not produce results, then it is necessary to “ring” the circuit. This can also be done using a multimeter. Approximate algorithm of actions:

1. Figuratively divide the circuit from the closer module to the control buttons into several sections.
2. At each of these sections, “ring” the power and control wires (if this is impossible to do with some wires, then you should limit yourself to a visual inspection).

If you visually or using a multimeter find damage to the wires, try to repair them. If the insulation is damaged, you can use electrical tape or heat shrink. If the wire breaks, install a new one (with a similar cross-sectional area).

Types and features of door closers

First, you need to decide on the operating algorithm of glass closers, their types and features. This information will help you make your choice in the future. So, let's start with a description of how this device works.

The door closer is an electronic control unit that is installed between the electric drive (electric motor) of the windows and its control button on the car doors. When the alarm is disabled, it does not work, passing command signals through itself to lower or raise the windows. And when the alarm and central locking are turned on, it automatically checks the condition of the windows, and if they are open, the control unit sends a command to the electric drive to close them.

There are several types of door closers, each of which has its own characteristics. Let's look at them in more detail:

Internal part of the door closer

• Window closers for 2 glasses and 4 glasses . Accordingly, they can be installed in cars equipped with two or four electric windows. There is no fundamental difference in their operation, except for the complexity of the connection. We will touch on this issue a little later.
• Availability of memory . The point in this case is that the device remembers the height of the glass before closing it, and returns it to the same level when the alarm is turned off and the central lock is opened. This function can be canceled if, for example, it is raining outside. The procedure is performed through the control unit interface, and differs for each model.
• Availability of protection for glass and external objects . This implies the presence of a safety mechanism that stops the glass from closing if an object gets between it and the upper edge of the window space. Thanks to it, you can avoid injuries (for example, if such an object turns out to be a human finger), damage to the glass itself, as well as failure of the corresponding electric drive.

Naturally, the price of a glass closer will differ depending on the presence of the listed functions in it, as well as the brand under which the device is produced. As a rule, the connection diagram of the closer does not change due to the presence of additional capabilities. Next we will consider this issue in more detail.

Installing a glass closer

When purchasing the device, the connection diagram for the glass closer must be included. Therefore, all further work must be carried out in strict accordance with it. The window closer unit itself can be installed anywhere in the car interior. Most often it is mounted under the door trim or under the front panel. The main thing that needs to be taken into account in this case is reliable protection of the device from moisture.

To work you will need the following tools:

• Phillips and flat screwdrivers;
• side cutters and pliers;
• electrical tape and/or heat shrink.

Now let's move directly to the question of how to connect a glass closer... As mentioned above, first of all you need to study the existing circuit. For ease of understanding, consider a door closer designed to work with 2 window regulators. Its typical connection diagram will look like this:

Depending on the design of the housing, the module is attached to one or two self-tapping screws (although there may be other options). If you decide to install a door closer under the driver's door trim, be careful when removing it. There are many different wires laid under the trim that ensure the operation of the power windows and central locking. Directly for work you will need a Phillips screwdriver, with which you need to unscrew the mounting screws and remove the trim (installation of the panel may differ for different cars).

The connection diagram for the glass closer involves connecting three wires to its module - power (“plus”), ground (“minus”) and a signal wire, which is connected to the car alarm (together with the central locking). As a rule, the electrical circuit of the closer has its own fuse. It is necessary to protect the device from a possible current surge during switching processes or emergency situations.

Installing a door closer on a VAZ Kalina

The most difficult moment when connecting a window closer is that it is necessary to make an insertion into the wires going to the electric window regulator. The insertion locations can be seen in the diagram above.

At the same time, it is important not to confuse the “pros” and “cons” of the existing circuit and the connected device. Otherwise, the direction of rotation of the engine, and therefore the movement of the glass, will be opposite

In other words, when installing a car alarm system, the closers will not close, but open the windows.

As for the closer, designed to work with four glasses, the approach will be the same. The only difference in this case is the larger number of wires. If for a 2-window closer three wires are used for power and control, as well as four for raising the windows (two for each window regulator), that is, seven in total, then in the case of a 4-window closer their number will increase by four more (2 more wires each). per additional drive).

Once you have connected the appropriate wires, be sure to insulate them well. For this, you can use mounting insulating tape or so-called heat-shrink tubing (an insulating material that “shrinks” when exposed to high temperatures, for example, a portable gas burner). For reliability, you can use both materials.

Install the door panel on the car door only after checking the functionality of the circuit. Hide the mounted wires under the panels so that, firstly, they do not interfere with the driver and passengers, and secondly, they cannot be damaged. To do this, you can use plastic ties, electrical tape, corrugated mounting tubes, and so on.

Installing a window closer on a HYUNDAI CRETA

Installation of door closer on AUDI 80

As you can see, installing a glass closer is not difficult. The main thing is to connect the module according to the diagram, and then carefully insulate the wires and hide them.

How does a car window closer work?

Automotive window closers are very popular today, as this automated device is convenient and functional; Drivers do not have to check whether all the windows of a car with an alarm are closed. If previously door closers were a privilege only for the premium class, now this mechanism is universal and affordable. This article will tell you what a glass closer is and how it works.

Interesting! The first anti-theft systems were activated using the drive shaft. At the moment of the theft, the car was choked by the sound of a siren, crying out for help.

Operating principle of the glass closer

The door closer is an electronic unit connected to the alarm system or central locking and glass control system.

It is located between the electric motor that moves the windows and the control keys. The operating principle of the glass closer is simple: the voltage transmitted to the motor from the keys passes through the block. In this case, the mechanism does not turn on when closing and opening, in normal operation without setting the security mode. When the alarm is connected, the unit receives a signal from the device, the motor charges and raises the glass on the door.

Did you know? In the car owned by Al Capone, the windows were bulletproof, their thickness was two centimeters.

What types of door closers are there?

The difficulty in choosing a closer module lies in determining the number of glasses it will support. Mechanisms responsible for closing two or four glasses are produced and sold. Next, you should clarify whether there is a glass control system on the rear doors of the car.

Simple modules are responsible for the windows only in vehicle security mode. Smart window closer devices can have a number of other functions: remember the position of the windows and return them to their original position after the alarm is turned off, and return them to their previous position if the glass hits an obstacle. The functions of the module can be customized as desired.

Attention! All the capabilities of a multifunction device may not be needed, and setting up the mechanism is difficult to maintain and costs significantly more than a conventional one.

Installation and connection of glass closer

Let's consider connecting a glass closer operating on two doors.

For self-installation you will need: a set of screwdrivers, a knife, insulating tape and thin wire cutters.

First, turn off the ignition and make sure that the windows open and close when you press the button. If not, remove the relay from the fuse block and install a jumper in its place.

The window closer unit is installed in the driver's door. To remove the trim, you must first unscrew the door handle screws and remove it. When freeing the door from the trim, be careful, as there are blocks with wires going to the door. The module is attached with one self-tapping screw to a metal plate and fixed to the base of the door.

Important! With separate systems located on two doors, installation under the dashboard is more acceptable. Connect the positive contact and ground to the device block to power it

Connect the positive contact and ground to the device block to power it.

Find out which wires transmit voltage from the control buttons to the electric motors.

The closer comes with instructions and diagrams. Determine the insertion points of the unit wires and power wires; in the diagram they are distinguished by different colors.

Check carefully whether the wires are selected correctly. Two wires run from the power buttons to the electric motor: one under voltage raises the glass, the second lowers it. If you mix them up, the windows will automatically open in security mode.

Then connect the wire that transmits the impulse from the security system unit to the closer.

A car window closer is an extraordinary mechanism: it has an output for both positive and negative impulses, do not confuse them.

Before insulating and removing the wires, check the operation of the closer. The work is completed, assemble the doors, install the handles and use them.

Using the same method, the power window closer is connected to 4 windows. The difference from a simple device is only in the number of inserts in the wiring.

Every driver who understands electrics and can read diagrams can independently install a window closer on his car.

Subscribe to our feeds on Facebook, Vkontakte and Instagram: all the most interesting automotive events in one place.

Review of popular models of glass closers

We present for you an overview of popular glass closers in our country, which are installed by owners of a wide variety of cars - VAZ (Priora, Kalina, 2110, 2114), Hyundai, Nissan, Mazda, Kia, " Toyota" and many others. For ease of perception, the information is summarized in a table.

We recommend that you buy glass closers manufactured under well-known brands. Do not buy cheap Chinese devices, since there is a high probability of purchasing a door closer with a low working life. In addition, there are many defective products in the low price category. Therefore, we recommend that you do not save money.

Conclusion

A window closer is a very useful device, so if your car does not have one installed, we recommend that you buy one. Installing a door closer with your own hands is quite possible for a car owner who has basic installation skills and knows how to read electrical diagrams. The main thing is that before installation, carefully study the attached documentation, and especially the connection diagram. As for choosing a model, buy devices from the middle or highest price category. They will not only be reliable, but also durable.

Surely everyone is already accustomed to the fact that virtually any car is equipped with an alarm system, and this is not even discussed. As with any rule, there are exceptions here too, but exceptions are exceptions, and the rule remains the rule. However, the anti-theft system is a delicate issue, especially if the car is expensive, then the alarm system must correspond to it, and not only by the presence of a CAN bus, but also by available functionality, one of which is the Pandora DWM 210 automatic window closer.

There are several reputable and well-established companies on the modern market of anti-theft systems, but it is worth noting that in terms of the totality of their advantages, many put Pandora systems in first place, at least among domestic manufacturers.

Window lifter "Grenade"

In this case, the process of disassembling the door and dismantling the standard rear door window regulator of the Lada Vesta is the same as in the previous case.

When the element is removed and the glass is fixed in the uppermost position, you need to take the adapter plate that comes with the kit.

Then install it on the window lifter carriage, directly under the gearbox housing, aligning the holes.

Next, you need to remove the glass clamps from the standard mechanism, including the rubber linings, and then install them on the carriage, screwing them with a pair of standard bolts.

Then the “Granat” window lifter is installed on the back door of the Lada Vesta. You need to remove the plastic spatulas or tape that held the glass in place, carefully lower it into the clamps and secure it.

At the end, you need to check the correct operation of the mechanism using wires and a battery.

Connection

Wires are included with the power windows of the rear doors of the Lada Vesta, but before connecting it is recommended to try them on and then lengthen or shorten them. The main thing is to remember to carefully insulate all connections after this.

The wiring harness is inserted into the door, after which it is pulled through the corrugation into the interior using a piece of wire.

To prevent the wiring from dangling in the cabin, it needs to be hidden under the panels of the B-pillar and sills.

When everything is done, one wire harness must be pulled and connected to the opposite door, and the second is routed to the connection point in the mounting block.

Next you need to install the switches. You can use those that come with the kit, or buy separately, for example, from Kalina or Granta. And plugs are inserted into the holes remaining from the handles.

The switch block is then connected to the power window switch and finally the door card is put in place.

The whole process, including the removal of the door cards, is clearly demonstrated in the video

As you can see, it is quite possible to independently install the rear power windows of the rear doors of a Lada Vesta, although this will certainly require some financial and time costs.

Standards and schemes from different manufacturers

There is no standard scheme for connecting a car security system. This can be understood by analyzing the electrical circuits of signaling systems from different system manufacturers. The color of electrical circuits in systems from different brands may be intended to solve different problems. Almost every manufacturer has a certain method of installing and connecting devices.

The colors of the cables in each electrical circuit may differ depending on the standards adopted in a particular country. In order to correctly connect the signaling elements, you need to focus on electronic measuring equipment for ringing. When installing an alarm system on a car, it is not recommended to use conventional lamps for dialing.

Depending on the location of the main units, the user may need to purchase additional electrical circuits. During installation, it must be taken into account that the cross-section of the additional and standard signaling wires must be identical.

Map of the location of the component signaling devices

Similar products

Do you like the store? Rate it on the Market!

Familyevich Evgen

Very good store, I recommend it!

Aminev Maxim

The best window lift store in Russia! :)

Latysheva Julia

Fast? placing and sending an order, complete and accurate information about the order.

Osipov Alexey

They called back right away and clarified the order. The order arrived ahead of schedule.

Safarov Oleg

Well done. You work quickly. And most importantly, the prices are reasonable. Keep it up!!

Nikolay Sotnichenko

Advantages:

Good order processing speed. Pleasant communication from employees. Flaws:

No.

Ruslan Lukoyanov

I am very pleased with the work of the store, everything is without deception and fast delivery. Keep it up!

Dorofeev Timofey

I definitely recommend the store. Very quickly and clearly. Other online stores could do it.

Vitaly Sukhovlovsky

Advantages:

Malenkin Roman

Ordered on Sunday, they called back within 10 seconds. Sent on Monday. Lightning-fast comrades! Well done!

Fedotov Nikolay

Advantages:

great store Disadvantages:

no
Comment:
fast, cheaper than in other stores, high quality.

Korolev Alexander

Very responsive sellers, after placing the order they immediately called back and discussed the order and sent it out the next day.

Sulin Vladimir

Excellent store, received the order clearly, shipped quickly, received it earlier than expected. The product corresponds to the order. Well done!

Bogumilov Valery

Advantages:

Everything is super, fast and high quality. Flaws:

No
Comment:
Thank you, well done, everything is high quality and fast.

Advantages:

convenient, fast, no problems Disadvantages:

no
Comment:
They work quickly and ship quickly. Thank you!

Semyon Semyokhin

Advantages:

Quick response to orders, polite technical support, prompt assistance in questions that arise Disadvantages:

Not found

Bohun Orest

How to connect a window closer to an alarm system?

Installation and connection of door closers:

The devices are installed in the car doors; to do this, their upholstery is dismantled. The closers are powered from the vehicle’s on-board power supply; a positive contact and ground must be connected to the device

It is important that the electrical circuit to which the closer is connected is active when the ignition is turned off. Using the tester, electrical lines are determined that are intended to supply voltage from the control buttons to the electric window motors. In accordance with the wiring diagram for the closers, the cables are inserted from the control unit to the power supply circuit. To connect to the doors, the outlets in the device are used; they have different colors

The cable that goes from the control button to the electric motor is cut into the ends of the power line. The contacts of the block are connected to the electrical circuit. When connecting, you need to choose the right cables; there are two of them from the control buttons to the electric motor. When voltage is applied, one of the power lines raises the glass, and the other lowers it. If errors are made during connection, activation of the protection mode will be accompanied by automatic opening of the windows. Then a cable is connected to the closer, designed to transmit a signal from the control unit. You will need a signal that is sent to the unit within a second when the protective mode is activated. Depending on the type of device and system, negative or positive contacts may be used for this. Immediately before connecting, you will need to find out exactly what signal the signaling control unit is sending. When the wires are connected, device operation is diagnosed. Provided that everything works correctly, the consumer isolates all tie-ins of electrical circuits and masks them. The procedure for connecting a four-door closer is carried out in a similar way, only more connections will need to be made into the standard electrical network.

Types of door closers for cars

These devices are divided according to their capabilities and are standard and multifunctional. If the first type only closes the window when the alarm is turned on, then the diagram of the second mechanism for adjusting the window lifters implies the presence of a number of additional options. These include the following functions:

• Lowering or raising the glass according to the classic algorithm (the module works as long as the button on the key fob is pressed) or with one touch.
• Control of several windows, which is carried out in one direction (closing/opening at the same time) or in different ways (raising one glass and lowering another).
• The module triggers automatically when the alarm is set.
• Auto return to original position: the door closer unit can return the windows to their previous state if the car has been disarmed for 2 hours.
• Blocking of electric windows for the duration of the alarm mode.
• The controller is configured automatically depending on the operating pattern of the window regulator in a particular model.