How to remove the windshield of a VAZ 2109

To ensure that your car rarely breaks down and does not cause trouble, you should always monitor it and repair all breakdowns in a timely manner. You should always replace worn parts, such as the windshield, on time. Visibility depends on the condition of the windshield. Very often, cracks or chips form on the surface of the glass, and if the glass becomes cloudy in this area or cracks spread throughout the windshield, then in this case it needs to be replaced urgently.

Many people think that this is difficult to do, but in fact such work can be easily done with your own hands. Car stores sell a large number of glasses for VAZ 2109, 2108, 21099 and they differ only in cost, quality and characteristics.

Such a variety of products on the market can confuse the buyer. In this case, the driver will want to save money and buy the cheapest product. What you need to know about choosing a car windshield? You need to remember that original glass from the manufacturer is not cheap, but the quality in this case is excellent. There are a large number of alternative options that are not inferior in quality to the original.

The product is practically no different from the original and has a large number of different quality certificates. The buyer is in no way insured against defects. You should always know several parameters that make it possible to determine the quality of glass. First, you need to carefully inspect the outside of the glass to ensure there are no chips or cracks on it. The edges must be perfectly finished and have a smooth surface. If you do not want to change the windshield yourself, then in this case you can use the services of automobile workshops. Before purchasing, you need to inspect the glass and look through it. In this case there should be no distortions. The glass must be clean and free of foreign matter. Only those enterprises that have special equipment can produce high-quality glass. One of the main parameters of glass quality is compliance with all geometric parameters, which must be checked at the manufacturer. REAL glass, which is made in factories, has a black marking because there you can find out about the type of glass and the manufacturer. If there is no marking, then the glass is fake and cannot be purchased. After purchasing, you can begin replacing the windshield. To replace glass you need a thin guitar string, glue and degreaser. You also need to have an assistant available. We drive the string into any corner between the glass and the roof of the car. Then, with an assistant, you need to work on the string as you would with a saw. From the outside, one pulls up, and the second from the interior side pulls down. When the glass is removed, the remaining old glue must be removed from the body. We treat the frame and glass with a degreaser and apply glue, which is similar in structure to foam, which must be applied using a special gun. The glue must be applied in a line without interruption, wait 15 minutes and put the glass there, do not forget about the seals first. The vehicle should only be driven after 12 hours.

Replacement

Replacing the windshield on a VAZ 2109 involves premature removal of the old one.

Replace the windshield of a VAZ 2109

Removing glass from a “nine” is much easier than, for example, from a “ten”. In this case, the glass is not glued directly to the body of the vase. On the contrary, it is fixed with a seal.

Removing the old windshield

To get rid of your old windshield, follow these steps:

? Take a screwdriver and insert it into the seal about 5 mm. This should be done at the top of the windshield.
? Push out the seal so that part of it can be pulled out.
? Move the screwdriver about 5 cm to the side.
? Get rid of the sealant step by step.

Note: It is advisable to do this gradually so that the glass does not fall out. Jerking will not lead to anything good.

? After the seal is removed to the upper side corner, you can begin to remove the glass itself.

Note: there are two ways to remove it: either squeeze it out from the inside (this will allow you to remove it from the outside), or pull it towards you (for maximum results, pull it slightly upward).

It is usually not possible to save old glass. Even professionals rarely succeed in this. That is, it will be damaged during operation. And why save it? If you decided to carry out work to replace it, then there were reasons for this.

How to prepare new glass

Replace the windshield on a VAZ 2109

Before you begin installing new glass, you must do the following:

? Put on the seal. You can use an old seal that was removed from the previous glass. This will make the work easier, since it is already more elastic, so it can be easily installed in the right place.
? However, using a new seal will require a lot of force. To do this, you will need to put it on all corners of the glass. Afterwards, you will need to lightly press on it so that it sticks into the side, top and bottom sides.
? Now it’s the castle’s turn. This is a small wedge that looks like the letter P. It needs to be inserted so that it is in the center of the seal, but runs along its entire perimeter.

Note: Before installing the wedge, it needs to be stretched slightly. This is done very easily, since it is quite plastic.

? You need to insert it like this: first the long part, then the short one. This needs to be done around the entire perimeter of the glass. However, part of the wedge may remain, so you will have to carefully cut it off, because it will interfere if everything is left as it is.

Glass installation

Do-it-yourself windshield replacement for VAZ 2109

To easily install the glass in place, you need to use a rope (it should be quite dense and strong so that it does not break). Everything needs to be done in the following sequence:

? Determine by eye where the middle of the rope is located. Insert this part into the seal (outside). Since the seal has two grooves, you should find the one that will be closer to the outside of the glass. This is where the rope is inserted.
? Using a screwdriver, insert the rope into the groove until it stops. Insert the rope until the middle of the bottom of the windshield is reached.
? On the opposite side, the rope should also be inserted until it intersects with the end of the previous rope.
? When they intersect, the end of one must be placed on the end of the other.

Windshield and its replacement

Note: There should be a slight overlap. Its length should be approximately 5-10 cm. In this case, it should be recessed into the seal all the way.

? Before you begin installing the windshield, you should pull the loose ends of the rope inside the car.
? Now you can lay the glass on the opening. This must be done so that the lower part of the opening penetrates the outer groove (that is, the groove where the rope was previously inserted).
? The glass should be pressed lightly, but not inside the car, but down.

Note: This will allow him to sit better.

? The rope should be pulled towards you, but not vertically, but horizontally.
? The seal easily makes its way into the interior.

Note: You should wipe it off so that it does not get on any parts of the machine. Once it dries, it hardens, so it will be much harder to remove.

? Pull half the rope to the bottom corners of the glass.
? After this, smoothly seat the glass.
? To make it easier to overcome corners, you need to pay attention to the following: to make it easier to go through left corners, you need to “twist” the rope clockwise, and right corners - vice versa.

Note: This is quite difficult to do as the rope is tight. However, the slower this action happens, the better it will be. This way the insulation will fit well on the opening and will hold up well afterwards.

? While pulling the rope, you need to carefully seat the glass in the opening. Under no circumstances should you hit the glass with any foreign objects. You can only lightly hit it with your hands (or rather, not even hit it, but gently push it).

Windshield VAZ 2109

? When the rope has completely come out, you should carefully check the interior. After all, the seal could come out and glue residue could remain. And besides, he could have landed on the torpedo. To fix this, you should drive it into the opening using a flathead screwdriver.
? Finally, you should shrink the glass all the way. To do this easily, you need to place your hand on the top edge, lightly hitting it with your second hand. The same should be done with the rest of the glass area.

High-quality windshields for VAZ 2109

Note: There may be slightly noticeable gaps between the seal and the opening. This is not a big deal, as they could have appeared due to slight movement of the glass. After just a few days, the glass will shrink better and all the gaps will disappear on their own. And the glass will stand completely still.

If you want to save time, you can take your car to a car dealership, where the price for windshield replacement work will be rather high. But, if you want to save your money, you can do the repair work yourself. Of course, before this you should review various photos and videos on this topic. And if you come across instructions somewhere on the Internet, you should not neglect them.

You can also find out about replacing the rear window on our website.

Protection from dirt of the interior and body

Replacing the rear side glass in a VAZ 2109

Regardless of how the broken glass is replaced, we must not forget about thoroughly cleaning and removing small fragments from the interior. Otherwise, there will be a risk of injury to both the driver and passengers. As a rule, even a minor crack grows into a large web. This is due to the strong “tension” of the glass. To prevent the crack from expanding, the technician must remove it.

Replacing the rear side glass on a VAZ 2109

Today, many are interested in the process of changing side glass itself, namely detailed operations and step-by-step procedures for its installation. If you follow the instructions and recommendations, you can do the work yourself, but if for some reason this is not possible, it is better to contact an experienced auto mechanic who will carefully remove the damaged glass, preserving the molding.

Replacing rear side windows in a VAZ 2109

In some situations, it is necessary to change the glass on a car using an individual approach; in most cases this concerns expensive cars or non-standard vehicles. A full cycle of glass installation involves many procedures performed in a certain order.
If the work is carried out in a car service center, the master must issue a guarantee, which will be valid under the condition of normal and shock-free use of the vehicle.
If you will be doing the work of replacing the side glass yourself, it is strongly recommended that you read the detailed instructions and recommendations. It would also be a good idea to watch a training video.

Replacement

Replacing the windshield on a VAZ 2109 involves premature removal of the old one.

Replace the windshield of a VAZ 2109

Removing glass from a “nine” is much easier than, for example, from a “ten”. In this case, the glass is not glued directly to the body of the vase. On the contrary, it is fixed with a seal.

Removing the old windshield

To get rid of your old windshield, follow these steps:

? Take a screwdriver and insert it into the seal about 5 mm. This should be done at the top of the windshield.
? Push out the seal so that part of it can be pulled out.
? Move the screwdriver about 5 cm to the side.
? Get rid of the sealant step by step.

Note: It is advisable to do this gradually so that the glass does not fall out. Jerking will not lead to anything good.

? After the seal is removed to the upper side corner, you can begin to remove the glass itself.

How to prepare new glass

Replace the windshield on a VAZ 2109

Before you begin installing new glass, you must do the following:

? Put on the seal. You can use an old seal that was removed from the previous glass. This will make the work easier, since it is already more elastic, so it can be easily installed in the right place.
? However, using a new seal will require a lot of force. To do this, you will need to put it on all corners of the glass. Afterwards, you will need to lightly press on it so that it sticks into the side, top and bottom sides.
? Now it’s the castle’s turn. This is a small wedge that looks like the letter P. It needs to be inserted so that it is in the center of the seal, but runs along its entire perimeter.

Note: Before installing the wedge, it needs to be stretched slightly. This is done very easily, since it is quite plastic.

? You need to insert it like this: first the long part, then the short one. This needs to be done around the entire perimeter of the glass. However, part of the wedge may remain, so you will have to carefully cut it off, because it will interfere if everything is left as it is.

Glass installation

Do-it-yourself windshield replacement for VAZ 2109

To easily install the glass in place, you need to use a rope (it should be quite dense and strong so that it does not break). Everything needs to be done in the following sequence:

? Determine by eye where the middle of the rope is located. Insert this part into the seal (outside). Since the seal has two grooves, you should find the one that will be closer to the outside of the glass. This is where the rope is inserted.
? Using a screwdriver, insert the rope into the groove until it stops. Insert the rope until the middle of the bottom of the windshield is reached.
? On the opposite side, the rope should also be inserted until it intersects with the end of the previous rope.
? When they intersect, the end of one must be placed on the end of the other.

Windshield and its replacement

Note: There should be a slight overlap. Its length should be approximately 5-10 cm. In this case, it should be recessed into the seal all the way.

? Before you begin installing the windshield, you should pull the loose ends of the rope inside the car.
? Now you can lay the glass on the opening. This must be done so that the lower part of the opening penetrates the outer groove (that is, the groove where the rope was previously inserted).
? The glass should be pressed lightly, but not inside the car, but down.

Note: This will allow him to sit better.

? The rope should be pulled towards you, but not vertically, but horizontally.
? The seal easily makes its way into the interior.

Note: You should wipe it off so that it does not get on any parts of the machine. Once it dries, it hardens, so it will be much harder to remove.

? Pull half the rope to the bottom corners of the glass.
? After this, smoothly seat the glass.
? To make it easier to overcome corners, you need to pay attention to the following: to make it easier to go through left corners, you need to “twist” the rope clockwise, and right corners - vice versa.

? While pulling the rope, you need to carefully seat the glass in the opening. Under no circumstances should you hit the glass with any foreign objects. You can only lightly hit it with your hands (or rather, not even hit it, but gently push it).

Windshield VAZ 2109

? When the rope has completely come out, you should carefully check the interior. After all, the seal could come out and glue residue could remain. And besides, he could have landed on the torpedo. To fix this, you should drive it into the opening using a flathead screwdriver.
? Finally, you should shrink the glass all the way. To do this easily, you need to place your hand on the top edge, lightly hitting it with your second hand. The same should be done with the rest of the glass area.

High-quality windshields for VAZ 2109

Preparing the installation kit

Before installation, a number of preliminary works need to be done.

Stages	Actions
First of all, try on the new windshield.	If the fit is not tight, eliminate minor discrepancies in the geometry with light blows of a rubber hammer. If you use a regular steel hammer for straightening, be very careful; strike through a piece of thick rubber or elastic polymer material.
After eliminating geometric discrepancies, the frame should be inspected for corrosion.	Treat areas with traces of corrosion with a rust modifier and prime.
Prepare the sealant.	Apply a thin layer of sealant to the well-cleaned and dried surface of the internal (glass) groove. Do not use quick-drying sealants. Throughout the entire process of installation and shrinkage, which lasts two to three days, the sealant must maintain viscosity.
Install the seal on the new glass.	Generously lubricate the outer (frame) groove with liquid sealant. Use the groove closest to the car interior; this is where the edge of the frame should fit.

https://youtube.com/watch?v=P5BJb6Jh6Bo

To install glass with a seal into the frame, you will need 4.5 meters of durable nylon cord. The length is determined by the size of the windshield. You need to add 50–70 cm to the perimeter of the frame. The size of the rear window and the size of the side glass are taken into account in the same way. The cord should have a slippery surface and a diameter of 4 mm.

It should be placed in the outer groove of the seal, starting from the middle of the cord and from the center of the top of the frame groove. The cord should be laid symmetrically to the right and left from the center of the upper groove, down along the left and right edges of the element and along the lower edge of the part from the edges to the center. In the middle of the lower groove, the mounting cord should overlap, one end over the other.

The cord should have free ends that should not be tucked into the groove; they are needed during installation.

Removing the windshield without damage

Quite often, when repairing a car, it becomes necessary to remove glass from the openings of the car. With the glass of the classic VAZ it is a little easier, the lock is removed and the glass is squeezed out, but how to remove the windshield or rear door glass on a VAZ 2108 #8212; 2109?

How to remove the windshield without damaging it?

The method below was useful to me when removing the glass from my Golf 2. In this way I pulled out all the glass from the car. It is worth noting that this method is used to obtain glass that is mounted on a rubber seal.

Attention! All work with glass is quite dangerous, so we take all necessary measures in order not to harm ourselves!

In order to remove the windshield from the car we will need the following tools:

A dull screwdriver (this is a very important detail, since a sharp screwdriver will ruin the rubber seal or at least its appearance).
Construction hair dryer (only needed if the seal is quite rough or the ambient temperature is low)
Assistant:)

In fact, everything is quite simple #8212; In order to remove the windshield on a VAZ 2109, you need to tuck the inner side of the seal behind the protrusion on which the glass is held.

In practice it looks like this:

We tuck the inner part of the seal over the side

I recommend starting to remove from top to bottom; in practice, it is enough to tuck the entire top and half of the racks over the side. After this, it will be possible to push out the glass, which must be held by an assistant on the other side.

Do not press the glass with a screwdriver; it will inevitably crack. Try to carefully and evenly tuck the seal over the side. It happens that the seal fits very tightly and there is no space behind the side, then you need to push the glass a little, notice which corner is weaker and start removing from there. It was not for nothing that I remembered that you may need a hair dryer, since over time the seal becomes very hard, a hair dryer will help here, just warm up the seal and it will slip out quite easily. You can also lubricate the inside of the seal with soap to make it easier to remove. One final note #8212; Be careful with the screwdriver, it is quite easy to puncture the seal, thereby ruining its appearance.

VESKO-TRANS.RU

Compared to the windshield of a car, replacing the rear window on a VAZ 2109 is less common. Side windows are located on both the front and rear doors of the car. This list includes solid body (side luggage), solid glass body in minibuses and commercial vehicles. The transition of the side window to the VAZ 2109 and, perhaps, was done calmly by its employees. Sometimes side windows break due to mechanical impact, this is when the keys are left inside the car. Also, don't forget about theft.

The note! The price of the work directly depends on the method of assembling and disassembling the doors in the car. It is not necessary to immediately switch to 100, since installing the purchased glass will not take too much time, 2-3 hours.

Replacing the rear window with weight 2109

No matter how well you choose a studio, how to replace broken glass, do not forget about thorough cleaning and cleaning the interior of small fragments. Otherwise, there is a risk of injury to both driver and passengers.

You even turn a small crack into a huge net. This is due to the strong “stress” of the glass. To prevent the crack from expanding, the technician must remove it.

Removing the windshield of a VAZ 2109: how to do it right

General view of the front part of the VAZ 2109 car

It is known that you can drive a car without a windshield. At the same time, its technical ability to move on roads is not impaired. But both the driver and his passengers will experience maximum discomfort inside the cabin. Dust, wind, all precipitation will enter the cabin. In addition, the temperature inside the car and outside will be the same, which is especially unpleasant in winter. The article suggests getting acquainted with the question of how to install a windshield on a VAZ 2109 in order to protect the interior from all weather and external physical factors, with your own hands.

Types of automobile glass

Automotive glass for modern VAZ 2109 cars is manufactured using high technology. They differ from simple glasses in their high strength and design features, which allow all road users to be protected from injury during an emergency. There are two types of technologies for making windshields:

Triplex. This technology is most often used for the manufacture of rear, windshield, side windows and hatches. Translated from Latin, triplex means “triple”, and the design involves the production of multilayer glass: more than two layers of silicate or organic glass. At the time of manufacture, they are glued together with a special film and then pressed at a certain temperature. When broken, the broken parts of the glass remain on the film rather than breaking into shards with sharp edges.
Stalinite. The technology of its manufacture is that the glass is tempered: first it is heated to a certain temperature, and then it is cooled evenly and gradually in the air flow. When glass breaks, it breaks into a large number of fragments with blunted edges; in the event of an accident, they cause minimal harm to the driver and passengers. On modern cars they are used less often, but the temptation of installation elements is the lower price.

Tip: When buying glass, you need to carefully consider its markings. It is applied by chemical etching, located at the bottom right corner, and has a black color, as shown in the photo.

VAZ 2109 windshield markings

How to remove the windshield of a VAZ 2109

Replacing a windshield is mainly necessary after an accident or unexpected damage to the old one.

Installing a windshield on VAX 2109

Before removing the windshield on a VAZ 2109 you need to:

At the top of the windshield, insert a screwdriver into the seal five millimeters.
Push out the seal so that part of it can be pulled out.
Move the screwdriver to the side five centimeters.
Thus, consistently get rid of the sealant.

Advice: Operations should be done gradually, without jerking, and make sure that the glass does not fall out.

After removing the seal to the upper side corner, the glass can be removed. This is done in two ways:

By squeezing out from the inside. To do this, gently press on the upper corners of the glass, which is then squeezed out.
Pull the glass towards you. At the same time, you need to pull it up slightly.

Removing the windshield

After this, the rubber seal is removed, and the installation groove of the window opening is cleaned of dirt around the entire perimeter. Even professionals practically cannot keep glass intact, but old glass is usually not removed to preserve it.

Advice: It is better not to throw away damaged old glass, but to use it to cover the car when painting the body.

Preparing new glass

The instructions indicate that before installing the windshield on the VAZ 2109 you need to purchase:

New windshield.
The seal is rubber.
Decorative strip for the lock.
Nylon cord. Its thickness is up to four millimeters, length is approximately 4 meters.

The glass installation sequence is as follows:

The seal is put on. You can use old glass that was previously removed from old glass. This element is more elastic and easier to install in place.
Installing a new seal becomes more difficult. It must be placed on all corners of the glass.
A locking strip is inserted into the corresponding groove in the rubber seal.
A nylon cord is strengthened along the entire perimeter of the seal at the end of the glass. It fits into the deepest groove with a tight tension in the corners. In this case, the ends of the cord should meet at the bottom of the glass.
The glass is taken and mounted with the lower edge into the groove of the window opening for installing the glass.
With light pressure, the glass is completely inserted around the entire perimeter into the window opening.
The assistant gets into the car and pulls out the cord.
From the outside, you need to lightly press the places from which the cord is removed.
You need to remove the cord to the upper corner, first in one direction, then in the same way in the other. Then the cord needs to be removed completely.
After removing the cord, the glass is firmly and gently pressed into the window opening.

Design

We have already talked about sizes.
You all know that windshields have increased strength. This is not the usual glass that is installed in windows with wooden frames. In the case of the VAZ 2114, the front cover has a three-layer structure - triplex. Two layers of glass are separated by a transparent film. It is this that prevents fragments from scattering to the sides during collisions and impacts.

When replacement is required

Sometimes car owners are faced with the need to replace windshields. There can be many reasons for this, since you never know what will fly into the front of your car.

The main reason for damage to the lobovka is the condition of the roads. Sometimes all it takes is one pebble flying off from under the wheels of the car in front to require glass replacement.

Having received damage to the frontal part of the car, you have to deal with repairs and restoration of the integrity of the glass. And how to do it? Only by replacement.

There are two types of damage:

Cracks;
Chips.

Chips usually involve damage to the outer layer of triplex, so such a defect does not cause serious problems. But if a crack has formed on the windshield, immediate action should be taken. Otherwise, the glass may soon fall out, which will lead to accidents and more.

Example of chips

Your actions in case of damage depend on the type of defect.

Type of damage	Actions
Formation of chips on the surface	You can continue to use the car
Appearance of cracks	Apply temporary measures to prevent the glass from falling out, and then replace it with a new one.

Crack on the forehead

Temporary protection

There are several temporary measures that will allow you to keep the headband intact for some time. This is necessary in case you cannot yet find or purchase a spare part.

Make perpendicular cuts approximately 5 millimeters long along the edges of the crack. To do this, use a glass cutter.
Make several thin holes along the edges of the crack using a diamond drill bit. This way the crack will not spread further for some time.
Contact specialized auto repair shops. They know how to weld cracks in such a way that they become invisible.

Article on the topic: Misfires in cylinders 2 and 4 on a VAZ 2114

Temporary measures are only temporary, because soon you will definitely have to replace the front cover. Do not delay this so as not to aggravate the situation.

Glass selection

When choosing a new windshield for your VAZ 2114, focus on several main criteria. This will allow you to purchase a really good product that will last as long as possible.

Selection criterion	Nuances
Price	Don't try to find the cheapest options. Their quality level is appropriate. Some products today cost up to 1 thousand rubles, but there are also more expensive ones - about 3 thousand rubles. Too expensive is also not an option, since even it can be damaged by an accidentally dropped heavy object. Look for a middle ground - 1500-2000 rubles
Manufacturer	Take only original spare parts. Avoid analogues from third-party manufacturers and do not buy glass from dismantling shops
Surface	Before purchasing, check the condition of the glass surface. It should be smooth, transparent, no distortion
Marking	All glass is marked. From it you can determine what type of product it is and who made it.

Removing and replacing the windshield of a VAZ-2109

Windshield replacement

To remove the damaged windshield, remove the windshield wiper arms and the front strut covers. we tuck the edges of the seal behind the flange of the body opening and, pressing on the upper corners of the glass, squeeze it out. In this case, an assistant must support the glass from the outside. We inspect and, if necessary, replace the seal with a new one. When installing the windshield, wash the seal grooves with water and blow with compressed air.

Lubricate the seal groove with soapy water or penetrating lubricant such as WD-40.

We put the glass into the opening so that the ends of the cord are inside the cabin. An assistant lightly presses the glass against the opening.

We replace the rear door glass and side panels in the same way.

Causes of crack growth

When water enters a crack, it expands when it freezes. This results in wedging of the crack and its further growth. Repeating cycles can create a small crack through the entire glass in a short period of time.

Temperatures also have a negative impact. If a sharp temperature change occurs (for example, when turning on the windshield blower in winter with a fully warmed-up engine), this will cause an increase in internal stresses and crack growth.

Road irregularities and vibration from the transmission and engine affect the rate at which cracks grow. Also, abruptly closing the doors or trunk with a blow will have an impact.

Replacing glass in the door on a VAZ-2108-21099

Glass (side, windshield and rear) is an invariable attribute of every car. Their main purpose is to provide the motorist with the necessary visibility and protect them from negative environmental influences (rain, cold, heat, hail, and so on). In fact, it is thanks to the glass that complete comfort in the cabin is ensured.

Cons of glass

But glass (especially side glass) has a big drawback - it is sensitive to mechanical stress. Thus, even a small stone hitting one of the side windows can lead to a crack or complete destruction of the surface. In such a situation, the only way out is replacement. Many car enthusiasts go to a service station and shell out considerable sums for the work of a master. What for? Replacing the front or rear windows on the doors of VAZ-2108-21099 cars is not difficult. The main thing is to strictly follow the instructions and have the necessary tools at hand.

We replace the front windows on a VAZ-2108-21099 along with a window regulator

The first thing to start with is to buy replacement glass. It is advisable to give preference to the product for your car model (this point can be clarified with a consultant in the store). In this case, the damaged glass must be removed as carefully as possible.

Before you start disassembling the glass, be sure to remove the door trim and remove the rear view mirror (it will interfere with operation). Then proceed in the following sequence:

Remove all seals from the glass (both external and internal).
Remove the latches of the protective film and remove the latter (this can be done using a screwdriver).
Pull the top of the seal off the glass.
Raise the window using the handle until the window lifter slider mounting bolts are accessible. After this, unscrew the bolts and hold the glass.
Lower the glass to the very bottom until it stops.
Unscrew the nuts that secure the window regulator.
Remove the middle mounting nuts that hold the lift guide in place.
Unscrew the nut holding the lower part of the guide mount.
Unscrew the nut holding the upper part of the guide mount. At the same time, hold the window regulator.
Carefully remove the window regulator from the doorway.

Turn the glass a little and remove it through the top of the opening.
Immediately pay attention to the quality of the clip. If the glass surface does not fit tightly or there are obvious signs of damage on the frame, then it is better to immediately make a double replacement (that is, change both the glass and the frame).

If you are planning to change the window regulator, be sure to look at the markings on the bracket. Usually this place indicates which vehicle the device is intended for. For example, on the window regulator for the “eight” there will be VAZ-2108, and on the “nine” - VAZ-2109 and so on. In addition, after the main inscription there will be two more numbers - they indicate the type of glass (right or left).

Install the new glass and window regulator in reverse order.
Check the functionality of the device. Make sure that the glass opens and closes normally, without excessive force or distortion.

We replace the rear windows on a VAZ-2108-21099 along with a window lifter

When replacing rear windows, the sequence should be as follows:

Lower the glass to the very bottom, all the way.
Remove the trim from the door on which the glass is being replaced (the principle here is the same as on the front door).

Remove the glass seals (top and bottom). The sequence doesn't matter.
Remove three fasteners (two of them are located at the top, and one at the bottom). A screwdriver is enough to remove them. Remove the protective film from the door.
Unscrew the two mounting bolts that secure the glass frame to the window regulator slider. Hold the glass while performing this work.
Unscrew the three lift guide fixing nuts (two located slightly below, one above).
Unscrew the nuts that hold the window lift mechanism.
Carefully remove the window regulator from the door so as not to damage the mechanism. Inspect it. If there are defects, replace them.
Remove the seal located on the outside of the glass (without this, further work will not be possible).
In the same way, remove the seal located on top of the door.
Turn the surface of the glass and carefully remove it through the top. If it is damaged, be very careful (it may fall apart when dismantled). It's better to wear gloves to avoid accidentally hurting your hands.
Make sure that the glass is pressed tightly against the frame and that there are no obvious gaps. If there is obvious damage to the clip, it is best to replace it immediately along with the glass. Otherwise, after the first rain and detection of a leak, you will have to remove the glass again.
Install the glass on the car, return the window regulator and seals to their place. Screw all the screws into place and then check the operation of the mechanism (before installing the casing).

If necessary, treat the window lift cables with a special lubricant (in case of replacing any of the front or rear side windows).

Inspect the quality of the glass rise, the absence of distortion, and the tightness of contact with the frame. If there are no complaints, then you can safely finish the work and be proud of your achievement.

Search

rear window replacement

on VAZ-2109

Rear window The car is a real assistant for the driver. It is through him that we see what our client can do, what is happening behind us, and correctly assess the situation. However, glass is a very fragile material, and if a stone or other loose object gets caught in it, it can crack or shatter into a large number of small pieces. For a temporary solution, of course, cover the gap with a thick film. But this, of course, is not an option. In the future, the rear window will need to be replaced.

The car owner may have postponed this work until later, fearing serious expenses. In fact, our client is left to do everything possible to find the funds to purchase new glass and glue. The rest of the work is completed independently within 1-2 hours.

Replace the rear window on a VAZ-2109

Before you go to the store differently in the market and get a new rear window for your car

It is important that it fits your model correctly (pay special attention to heating and design features)

Then prepare the necessary tools. To get the job done you need. new glass (this is reasonable), special glue (ideally a two-component composition), new sealing rubber (you will need to throw the old one), a string for cutting glass, special suction cups (necessary for holding and lifting the glass). Additionally, tape, a knife, sandpaper and solvent are useful.

It is best to work in a well-lit area with sufficient maneuverability. If the weather outside is perfect, you can stay right next to the garage. Helping your partner replace the rear window is highly desirable. It is difficult to cope with such work without outside help.

What you need after the previous steps, start specifically. There are three steps here:

Remove the old glass. This work is performed in the following order:

Conventional glass

even a schoolboy can control the trunk lid.

Removing the rear window on a VAZ 2109 from Seryoga)))

Is it correct to remove the rear window

with nine nine.

When doing the work, be very careful not to touch the surface. car body (otherwise you will have to restore it).

Prepare a gap for installing new glass

When the old glass fails to take off, do not rush to “sculpt” a new one right away. It is better to perform some of the necessary manipulations:

Before installing the lock, it is better to pull it a little. Otherwise you won't like its length. The wedge installation is done like this. Install the long section first and the small section at the end. In this case, some part of the wedge remains unused; it is better to cut it. Otherwise it will interfere with future work.

install rear window
.

When should new glass be installed? There are two options. the old glass is damaged or you decide to glue a shadow. At the beginning, our client remains clear. do without a change. In this case, we are talking about tinting; it is better to do this work without disassembling. Practice shows that it is almost impossible to remove the rear window without damage.

Before installation, prepare a thick piece of rope. It is advisable that the length of the rope fully corresponds to what was left for our client on the side of the rear window

Pay special attention to the quality of the rope. he must become strong

If it breaks during operation, it will be difficult to remove the broken piece from the seal.

What you need to do is:

The final shrinkage of the glass occurs within 3-4 days. This is facilitated by vibrations that are inevitable when moving.

Conclusion

Source

Post Views: 3

Removing the seal

Before installing a new one, the old windshield of the VAZ 2109 must be carefully dismantled. To do the replacement yourself, you will need a slotted screwdriver with a slot width of 10–12 mm. If you plan to reuse the seal, make sure the screwdriver is relatively dull so as not to injure its blade. Before replacing the windshield, it is recommended to remove the windshield wipers. Even bent, they create interference.

Start dismantling the windshield on a VAZ 2109 from inside the cabin, from the middle of the top edge. In profile, the seal resembles the letter “H”. Between the lower halves of the legs of this letter is the edge of the windshield, and between the upper halves of the legs is the edge of the frame, smoothly turning into the roof of the body. You must carefully press the upper leg of the letter “H” closest to you and push it out of the body. Both legs of the upper part of the seal profile will be on the outside of the frame, and you will see the exposed metal of the edge of this frame.

After pushing out the first section of the seal, expand the area step by step. The most difficult step is the first, then the seal goes out almost without resistance. With a little luck, you can push the edge of the seal out without damage. Expand the removal area gradually in both directions from the center until the upper corners of the windshield are free.

If you are replacing the side glass of a VAZ 2109 located behind the rear door, start from the middle of the long side.

Required Tools

First you need to select a new canvas. Craftsmen recommend choosing double glass with a polymer layer or single-layer tempered stalinite. Required equipment and related materials:

nylon cord - about 5 meters;
rubber hammer;
slotted screwdriver;
sealant;
anti-corrosion agent and primer.

Preparation involves choosing a comfortable room for work; you also need to select equipment, purchase new glass and dismantle the old fragment.

You can put the old seal on the glass or purchase a new element to make the job easier.