Tire size for Daewoo Matiz: description, characteristics, models and reviews

The nimble Daewoo Matiz has long earned the title of popular car and irreplaceable in the conditions of city traffic jams and crowded car parking. The only problem is still the choice of suitable tires for the Daewoo Matiz. Besides the fact that the assortment presented in stores is not as wide as for 15- or 17-inch counterparts, there are also difficulties in choosing the right size. There are several suitable options. This article will tell you what size of tires and wheels for a Daewoo Matiz is best to choose and what experienced drivers recommend putting on the car.

Recommended tires for Daewoo Matiz

The manufacturer has established the main standard tire sizes for Daewoo Matiz: 155/65/R13 and 145/70/R13.

According to the accepted designation system for technical indices, the first number is the width of the tire at the point of contact with the road surface, that is, the distance between the outer edges of the tire when inflated. The second number indicates the ratio of tire profile height to width, expressed as a percentage. That is, 65% of 155 mm or 70% of 145. This figure in both sizes differs by literally a couple of millimeters and is about 101 mm. The letter R indicates that the cord arrangement is radial, as on most modern cars. And finally, the last number determines the radius of the inner circle of the wheel. All acceptable tire sizes for Daewoo Matiz are 13 inches (or 33 cm).

Selection of wheel rims for Matiz R13 and R14

How to install wheel products
Several wheel sizes are used for the Daewoo Matiz. This is mainly due to the fact that in the summer, tires with a smaller profile width are installed on the car, and with the arrival of winter, vice versa.

In any case, tires with factory standard sizes have identical length in outer diameter. Thus, the speedometer readings and mileage counters are not distorted.

According to the car's operating manual, it is recommended to use two sizes of tires for Matiz:

• 145/70/R13;
• 155/65/R13.

In conclusion, it should be noted that it is not recommended to install tires with non-standard sizes if the vehicle owner uses 175/60/R13 tires instead of the standard 155/65/R13 or 145/70/R13. In this case, it is necessary to completely replace one of the steering system mechanisms.

Which tires are better to install in winter and which in summer?

Owners of Daewoo Matiz recommend installing tires size 145/70/R13 in winter. Such tires, in comparison with their wider counterparts, in the studded version will brake better and “get out” of the melted snow porridge more confidently. And due to the fact that they are narrower and the profile is higher, the pressure on the spikes will be greater. This will allow them to better grip snow or fragile ice on the road. Manufacturers say that there are no recommendations regarding the choice of size for winter tires on the Daewoo Matiz; both tire sizes can be used regardless of the season and vehicle equipment.

The use of tires of standard sizes guarantees the absence of problems both with the vehicle’s handling and with warranty service, since there are often cases when the owners of Daewoo Matiz were denied a warranty extension due to the use of non-standard tire sizes.

Selecting tire pressure

For a comfortable ride, it is important to choose the right pressure, since the smoothness, maneuverability and safety of the vehicle depend on it. It is also important to note that there are certain requirements provided by the manufacturer itself, so the consumer requires special attention to detail in this matter.

It is important to remember that winter requires one pressure, and summer requires a completely different one. The fact is that incorrect pressure can cause inconvenience when driving. An individual attitude to the choice of tire pressure type allows you to avoid dangers when driving depending on weather conditions. It would also be a good idea to take into account the recommendations from the following table.

A car is not just a means of transportation, it is a real assistant, so you need to choose tires very carefully.

What other tire sizes do Daewoo Matiz owners install?

Tires of the size recommended by UZ-Daewoo, although they guarantee comfort and safety, are not very often found on open sale. In addition, the cost of such wheels is sometimes comparable to the price of their more serious 15-inch counterparts. Owners of small cars have long ago solved this problem and selected suitable wheels experimentally.

The most common and suitable replacement for standard tire sizes for Daewoo Matiz are tires of size 155/70/R13. They differ from the original Matiz ones only in the profile height, but, according to reviews, this does not in the least interfere with safe movement. The wheel touches the fender liner only when the steering wheel is in the extreme position or when snow gets clogged under the wheel arches in winter. Many owners have never encountered this problem at all, but, on the contrary, say that the ground clearance increases, and due to this the car drives softer and the dynamics decrease. This size fits on standard Daewoo Matiz wheels without any problems and will rarely arouse suspicion among service center workers, since it is the standard size for the Daewoo Matiz’s “twin brother” – the Chevrolet Spark.

Tires of size 165/65/R13 are recommended to be installed only as a last resort, when it was not possible to purchase products in one of the three sizes mentioned above. These tires are one centimeter wider than the maximum allowed by the manufacturer and significantly higher. But according to reviews from owners, the friction on the lockers when the car is completely turned is already quite strong, and the rubber on standard “stamped” wheels begins to be “eaten up” after 15-20 thousand kilometers. Therefore, such tires require more expensive “alloy” wheels. It is important to keep in mind that when using tires for Daewoo Matiz of these sizes, a correction is made to the speedometer readings: if the speed sensor shows 100 km/h, the real speed of the car is 102.3 km/h.

When installing even larger tires on the Daewoo Matiz, difficulties may arise with the normal operation of the steering mechanism, since the load on the suspension, engine and braking mechanisms of the car will significantly increase.

Tire sizes allowed for Daewoo Matiz

What non-standard sizes can be installed

The most popular option is 155/70 R13. These tires have 7 mm higher tread than standard rubber. They fit well into the arched opening and do not interfere with movement. As a rule, there are no problems with the purchase, because almost all dealers have this product.

Two more sizes are popular among motorists: 165/65 R13 and 165/70 R13. These models are taller and wider than the 155/70 R13. To install 165/70 R13, you will need to remove the fender liners.

If the car is under warranty, tires can be changed to size 175/60 ​​R13. However, the manufacturer recommends sticking to standard sizes. Installing non-standard tires may affect handling and cause you to lose control of your vehicle. When installing 175/60, a change to the steering mechanism is required.

When replacing, it is important to take into account that it is prohibited to install tires of different sizes, designs, and with different tread patterns on the same axle.

The use of non-standard sizes affects the operation of the vehicle as follows:

• the load on the braking system and suspension increases;
• fuel consumption increases;
• the engine operating mode changes.

When replacing, it is necessary to make an alignment and adjust the tire pressure level.

Hankook (Korea)

Decent tires for both the city and the highway. They cost a little more than Cordiant (from 2,000 rubles per cylinder), but according to the owners, they deserved a solid 5 in terms of handling (+ they were removed because the tires do not always behave well when driving in ruts, but this was never noticed case of side skidding) and 5+ for comfort (the rubber is very soft and almost silent). True, there are practically no tires of size 145/70/R13 on sale, but 155 tires - both summer and winter - are available in a large assortment.

Features and characteristics of bolt patterns on South Korean Daewoo cars

The bolt pattern is designated PCD, which stands for Pitch Circle Diameter. To immediately understand the essence of this parameter, it is necessary to consider it using a specific example of the Daewoo Gentra, the wheel bolt pattern of which is 4x114.3. In this case:

• The number four indicates the number of bolts with which the wheel is attached to the chassis elements;
• 114.3 is the diameter of the circle on which the mounting holes are located.

On a note!

Visually, it is impossible to correctly determine the required diameter of the circle, in contrast to the number of fasteners. You can measure the required diameter yourself: for this you will need a ruler, but it is more practical and more accurate to use a caliper.

After measurement, the obtained data must be inserted into special formulas, which differ for disks with three, four and five bolts. You need to choose the correct wheel size based on the standard factory parameters specified by the manufacturer.

You may be interested in this About original wheels for Toyota Corolla (Toyota Corolla)

Nokian Nordman (Finland, Russia)

A subsidiary brand of the economy segment of the Finnish concern Nokia N is focused on the Russian market; the plant for the production of these tires using Finnish technologies is located in St. Petersburg. Tires of size 155/70/R13, which is not typical for Daewoo Matiz, are in demand among motorists, as they guarantee 100% controllability in all weather conditions. They confidently overcome deep puddles, and in winter they perform well on icy surfaces, maintaining their trajectory and preventing slipping. All this, combined with an adequate price (about 2000-2500 rubles per tire), allows motorists to forget about such drawbacks as poor cross-country ability in muddy conditions or when caught in a snowdrift and faster wear compared to their budget counterparts.

What is the wheel bolt pattern on other models of the manufacturer?

The bolt pattern parameters are most often similar for different models. For car owners, this greatly simplifies the replacement of products, and also reduces the cost of production conversion for manufacturers.

Knowing the presented parameter guarantees that the product will fit the car model.

Wheel bolt pattern for Daewoo Espero and other important dimensions for the car:

• The number of mounting holes and the diameter of their location circle is 4x100;
• The diameter of the car hub is 56.6 millimeters;
• Rim diameter - from 14 to 15 inches;
• Rim offset - from 40 to 49 millimeters;
• Recommended width is 6.0J inches;
• The dimensions of the installed tires are 185/65 R14.

Car "Daewoo Espero"
For the "Daewoo Leganza" model, the drilling and main dimensions of the disks are as follows:

• The number of mounting holes and the diameter of their location circle is 5x114.3;
• The diameter of the car hub is 56.6 millimeters;
• Rim diameter - from 14 to 15 inches;
• Rim offset - from 39 to 45 millimeters;
• Recommended width: 6.0J or 6.5J, inches;
• The sizes of installed tires are 195/70R14 and 205/60R15.

Note!

The drilling parameter is different for different company models. This must be taken into account when selecting and purchasing wheels.

Daewoo Matiz M150 2010 0.8i

Market: European Domestic Market (EUDM) Generation: M150 Engine: I3, Petrol Power: 52 hp (38 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The Daewoo Matiz M150 2010 0.8i is equipped with 4.5Jx13 ET45 rims assembled with 155/65 R13 73T tires as standard. Where:

• 4.5J - rim width in inches;
• 13″ — tire diameter in inches;
• ET45 - disc offset in millimeters.

The vehicle tire marking 155/65 R13 is deciphered as follows:

• 155 — profile width (cross section of the tire) in millimeters;
• 65 — profile height as a percentage of its width;
• R - radial cord winding;
• 13 - tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 73T:

• 73 - maximum permissible tire load 365 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4×114.3. Thus, all the disks are fastened with four bolts and the distance between them is exactly one hundred and fourteen point 30 millimeters. The car's hub diameter is 69.1 mm.

Standard tire pressure is 2.2 MPa.

How to determine it yourself

It is clear that if you buy rims from an official supplier, then there should be no problems. Just look at the specified parameters, and they should correspond to reality. Although, of course, it wouldn’t hurt to check.

But where you definitely can’t do without checking is when buying from someone else. Here you need to carefully make sure that the parameters are exactly as the seller says. Even if he is a decent person and tells the truth, this does not mean that he is not mistaken.

Here's how to find out what wheel bolt pattern is on a Daewoo Matiz:

1. First you need to prepare the necessary tools. Ideally, this is a caliper, but in a pinch, you can get by with a ruler. This is necessary because it is impossible to measure the diameter of a circle by eye.
2. Then you need to take all the necessary measurements. If the seller is decent and smart enough, he will not interfere with the process.
3. It is advisable to take measurements on Matiz fasteners. Only in this case will it be possible to fully ensure that the rims will fit exactly.

Some may wonder why measure fasteners. No matter how popular and respected a particular brand is in the automotive industry, there is always a risk of mistakes and defects. And therefore, if a person is already engaged in independent replacement, he should take this into account and play it safe.

Some recommend inserting the obtained data on the bolt pattern of wheel rims on Daewoo Matiz into special formulas. This should show that the wheels will fit the car exactly. It is worth noting, however, that it is better to take original products for this model.

If this is not possible, then at least the factory values ​​should be taken as a standard.

What is the distance between bolts on Daewoo Matiz

The Daewoo Matiz comes from the factory with wheels marked as follows:

• Bolt pattern - 4×114.3;
• The width of the wheels is 4.5J and 5J and 5.5J, inches, depending on the modification.
• Reach - ET38 and ET45, millimeters.
• The factory wheel diameter is R13 or R14.
• The diameter of the central hole is CO 69.1 millimeters.

In this case, it can be seen that the Matiz disc is secured with four bolts, the holes for which are located around a circle with a diameter of 114.3 millimeters. When selecting disks with other sizes, it is necessary to strictly observe the drilling parameter, the diameter of the central hole and the overhang dimensions. Others may be a little hesitant.

Daewoo Matiz M150 2010 1.0i

Market: European Domestic Market (EUDM) Generation: M150 Engine: I4, Petrol Power: 65 hp (48 kW)

Wheel bolt pattern parameters

What wheel sizes does the manufacturer recommend to install?

The Daewoo Matiz M150 2010 1.0i is equipped as standard with 4.5Jx13 ET45 rims assembled with 155/65 R13 73T tires. Where:

• 4.5J - rim width in inches;
• 13″ — tire diameter in inches;
• ET45 - disc offset in millimeters.

The vehicle tire marking 155/65 R13 is deciphered as follows:

• 155 — profile width (cross section of the tire) in millimeters;
• 65 — profile height as a percentage of its width;
• R - radial cord winding;
• 13 - tire diameter in inches.

In addition, information about its load capacity and speed parameters can be printed on the rubber - load index and speed index. The load index is a two- or three-digit number; the speed index is indicated in Latin letters, for example 73T:

• 73 - maximum permissible tire load 365 kg;
• T — maximum permissible vehicle speed is 190 km/h.

Using the recommended tire sizes will help you avoid problems with handling, safety and other difficulties. What non-standard sizes can be supplied? Refer to the table; it indicates possible acceptable alternative sizes for tuning. Although there are other options that we have not described in the table. For example, wider discs of the same diameter. Or install wheels of the same width, but with a larger diameter, which is quite popular among car owners. The choice of discs is huge; you can find copies with the same parameters, but with an overhang 1-2 millimeters more or less. It is not possible to list all the options.

At the same time, the bolt pattern for all types of wheels is the same - 4×114.3. Thus, all the disks are fastened with four bolts and the distance between them is exactly one hundred and fourteen point 30 millimeters. The car's hub diameter is 69.1 mm.

Standard tire pressure is 2.2 MPa.