Panel for a VAZ 2107 car: which one can be installed?
Standard "seven" torpedo The instrument panel of the VAZ 2107 is a set of auxiliary units that notify the driver about the current state of the vehicle. The panel is dismantled to replace certain devices that have failed. It is also removed during partial repairs. It includes the following elements:
- engine oil pressure indicator,
- speedometer,
- tachometer and so on.
TO HOME. To the list of articles VAZ 2107. Dashboard and Torpedo BMW e 30 in the classics (VAZ Iari said that the instruments from the six fit one to one. A friend has just a six. Well, I couldn’t get the instrument panel from the VAZ 2106.
Title: 6 Album: Mmm 2106. Car model: VAZ 2107 With a tuned interior (all with your own hands). Tell me which foreign car parts are suitable for the VAZ 2107.
This is interesting! The BMW logo is a stylized view of an airplane propeller. The fact is that in the early stages of the company’s formation, at the beginning of the 20th century, BMW was engaged in assembling aircraft engines.
Maybe someone has some information about which foreign cars the parts are suitable for? struts, generator, starter, springs, engine, etc? the dashboard from the E 30 BMW will fit here on the forum, it seems you can find how to install it, etc.
The car is atmospheric, so it’s not for me to judge whether it lifts the head or not. Based on materials from the website DMCUNMOR.RU. In fact, I even saw a book like this on Zhiguli cars in a store. Instead of a stove there is only a fan and a stove radiator. Can you be more specific, a number or something else that you should pay attention to so that when ordering you won’t make a mistake, I’ll add it visually if that’s what you meant.
Dashboard VAZ 2114 for VAZ 2107 from Auto Repair
Knowing which of the following is most important is impossible. Each unit plays a role in the dangerous movement of a vehicle. It is worth noting that between the right and left parts of the standard VAZ 2107 panel there is a direction indicator and a set of light bulbs.
- Message about the opening of the air damper.
- Low battery level.
- All in all
- High beam.
- Report no oil pressure.
- Parking brake notice.
BMW dashboard for VAZ 2107 (where to buy, how to install)
#1 ar_lev
- Users
- 7 messages
- Moscow city
- Car: VAZ2107
Dear, a huge request for help))) I really want to install a 2107 BMW dashboard in my basin, my hands are growing out of nowhere)) Therefore, an installation specialist is also required. I also need your advice on where to buy a BMW dashboard, as I understand it is suitable for the BMW 3-series E30 model.
Post edited by ar_lev: 13 April 2010 - 14:39
- Top
#2 Golden_cat
- City: Moscow, Shaitanovo)
- Interests: managing this car club and communicating with its wonderful members =)
- Car: KoshKmobil'074, Kalinosport TsTsnezhok
etc.
Private Messages are also available
- Top
#3 ***PARTIZAN***
- Moscow city
- Car: Mazda RX-8 16V Turbo
look for the torpedo at disassembly. prices vary in different cities. installation is insanely easy. you cut the panel from the front and fasten it on the sides with self-tapping screws (once you see the panel you will understand what to fasten it to)... there is only one difficulty - the stove. I still haven’t made the air ducts =)) install the instruments from 2105 and you will be happy PS make the panel for the instruments out of cardboard, then transfer it to aluminum and cover it with leatherette. that's all)) I also made the panel for the mafon myself..(there was no money for the original one)
- Top
#4 ar_lev
- Moscow city
- Car: VAZ2107
Thanks a lot ! For good advice)))
If anything, I'll contact you.
Post edited by Belial: April 13, 2010 - 15:55 corrected quote
- Top
#5 ***PARTIZAN***
- Moscow city
- Car: Mazda RX-8 16V Turbo
Thanks a lot ! For good advice)))
If anything, I'll contact you.
- Top
#6 seasoned
- City: Capital
- Auto: innotaz
- Top
#7 ar_lev
- Moscow city
- Car: VAZ2107
Well, post some pictures and we'll take a look. let's check it out)))
- Top
#8 papir355
- City: SEAD
- Car: VAZ-21102, Golf-5
Attached images
Post edited by papir355: 07 May 2010 - 10:02
- Top
#9 Hurricane27
- City: Kazan
- Car: RED 2105
[SELLING] Rear solid windows for classics Toggle switches ala Pro-sport
- Top
#10 Beria
- Auto: 21099
A very interesting topic. People have come up with such a problem. I bought a BMW E36 instrument panel, let’s say Kalina will be. With the steering column I’m thinking about 2112, move the lever using a Shniv link. But the most serious question is that my heater doesn’t heat well and I’m thinking of changing it.. And on the dashboard there is a Euro heater control unit (without cables), so this is how you can replace this unit with a VAZ one, for example from Priora or Kadins, without cables?
- Top
#11 fly fox
- City: KURSK
- Car: VAZ
Torpedo from BMW E30
I walked and wandered around and bought a lot of spare parts and a new resonator and muffler. Such tuning can be done in two ways: Replacing the dashboard; Replacement of the entire torpedo. The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. It is somewhat more difficult to install a new panel. At the same time, it must be suitable in size and provide the ability to connect all vehicle systems.
The final choice depends on your ultimate goals and capabilities. Dashboard Let's start with the simplest tuning option. A donor will have to be found for a replacement. The simplest option would be to install a panel from a VAZ. There will be a minimum of problems with this work, and the resulting design will look much more advantageous. You will have almost no problems connecting wires. Here they are almost identical. All main devices are also connected in the same way.
Then the handle is removed from the mileage reset button.
VAZ 2107 dashboard reupholstery
On the right side of these levers, the decorative plug is removed. Using a Phillips screwdriver, unscrew the self-tapping screw that holds the VAZ torpedo. The next step is to disconnect the speedometer drive cable from it.
To do this, unscrew the knurled nut. Next, the vacuum supply hose and the bags with wires, which are initially marked, are disconnected. If necessary, repair work is carried out, including replacing the light bulbs of the main devices.
The procedure is carried out by scrolling the cartridge counterclockwise. Dismantling work involves unscrewing the nut securing the holders to the torpedo body.
Dismantling an old torpedo If we talk about which car the panel fits the VAZ from, then auto mechanics recommend installing a torpedo from a BMW or Volga
Panel or torpedo?
Which torpedo is suitable for the VAZ 2107? The issue is complex, but completely solvable. Just to begin with, you should determine how radical the alterations will need to be made. Such tuning can be done in two ways:
- Replacing the dashboard;
- Replacement of the entire torpedo.
The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. It is somewhat more difficult to install a new panel. At the same time, it must be suitable in size and provide the ability to connect all vehicle systems. The final choice depends on your ultimate goals and capabilities.
Gazelle dashboard
When replacing the instrument panel on a VAZ-2107, the equally popular Gazelle often becomes the donor. Despite the fact that the manufacturer of these two machines is the same, the work will be more complex. The Gazelle panel has large dimensions and also has a completely different configuration, shape and size. You will also have to tinker with the electrical wiring: you will need a number of adapters, as well as knowledge from the field of electrical engineering.
In such work, you will have to use a jigsaw and a soldering station to resolder the adapters. This is a rather painstaking procedure that should be approached with special care.
Tuning VAZ 2107 with a torpedo from BMW e-34
Also, this appearance has no attractiveness. Therefore, many drivers replace dashboards. The issue is complex, but completely solvable. Just to begin with, you should determine how radical the alterations will need to be made. Such tuning can be done in two ways: Replacing the dashboard; Replacement of the entire torpedo.
The first option will allow you to get by with little expense and replace the panel with another one that suits you more. You just have to adjust the socket a little in size. Feeling upset, I turned on the TV. A few minutes later an idea came. Light bulbs may also not work. And I didn’t check the devices at the time of purchase. 4 light bulbs did not work, I cleaned three, and pulled out one penny from the original instrument panel. It would have cost a little money if there had been a bug in the circuitry of my adapter - it would have been a break of about two months until I recovered my strength.
So the process was completed completely unexpectedly. It was Saturday outside, I got up in the morning and, as always on Saturdays, went to the car market.
Which seats are suitable?
You can replace the seats either by contacting specialists at service stations in tuning centers, or by yourself.
Which seats are suitable:
You can install standard, original, factory seats, but most often car enthusiasts try to replace the old “Seven” seats with seats from foreign cars, sports cars, or anatomical ones. Of course, installing new ones is not a cheap process. Therefore, a frequently asked question among car enthusiasts on various forums is which seats are best to choose or which seats are suitable (preferably with the least amount of intervention in installation).
It is indeed possible to install “foreign” seats on a VAZ two thousand one hundred seven. For example, seats from a Mercedes W210 (preferably one thousand nine hundred ninety six year of manufacture), or from a Toyota Corolla (1993 year of manufacture) are perfect for this purpose. Another option that works well are seats from SKODA and Fiat. In this case, it will be necessary to make two additional holes to install a more reliable fastening.
They also use seats from the Peugeot and Nissan brands, but you will have to deal with some inconsistency and a little work during the installation process. From the Volkswagen brand, these parts fit well without unnecessary modifications. These seats are quite convenient and comfortable, but it is not recommended to install them, since they will be quite high, which will lead to inconvenience. According to experts, any seats can be installed, the main thing is that they fit the dimensions and there is the possibility of welding.
How to dismantle an old engine
After you have carried out diagnostics and other preparatory work, you can begin to dismantle the factory unit. This is done like this:
- The car must be installed in a garage box on a lift or inspection pit.
- Then you need to disconnect the battery and remove it from the car. All attachments are also turned off and dismantled.
- Then you need to remove the power unit from the transmission and unfasten the mounting bolts.
- Next, using the hoist, you can begin to remove the motor. It is advisable to put the removed device on a stand and subsequently sell it. This will partially offset the cost of a new engine.
After all this work, you can proceed directly to installing the new engine.
As we have already found out, the best engines are products from Nissan and Fiat. Also, many people prefer BMW, Lancia or Volkswagen products. In order to install the engine correctly, you need to follow a clear sequence of actions. You can’t do this without the help of specialists. To be more specific, you need to call a welder who will perform the relevant work. You can independently secure all the necessary mechanisms and systems. All installation work must be carried out strictly according to the instructions, since one wrong action can lead to
that after installation the engine will not start.
After the battery is connected and fuel is refueled, you can try to start the car. Walking operations must be performed at low speeds. If the car does not start, it means that an error was made during installation. It is necessary to reconsider the sequence of your actions in order to find the error and subsequently eliminate it. If you can’t find the problem yourself, you’ll have to contact a professional. It is likely that the engine will have to be reinstalled.
What other changes can be made
In order to make your standard “seven” original and different from the rest, you can not only change the seats. If you have enough imagination and skill, you can do a lot. So, for example, instead of a standard instrument panel, install a panel from a GAZ 3110, modernize the interior lighting system, modernize the heating system and modify the stove, install power windows, reupholster the interior, install lighting on the doors, tune the standard beard and much more.
VAZ 2107 is an incredibly popular car among the people. It is often called the “Russian Mercedes” or “I want to be a Mercedes” for its characteristic radiator grille and the general appearance of the front of the car. This involuntarily provokes car owners to tune their cars. When you decide to change anything in your car, remember that installing non-original seats may raise questions from regulatory authorities, since such manipulations are considered changes to the design of the car.
During its entire stay on the market, 14 versions of this machine with carburetor and injection units were released. Their working volume ranged from 1.3 liters to 1.7 liters. The weakest engine, brand 21034, was installed in a sedan. 21079 had one of the most powerful engines. It developed power up to 140 hp. With.
VAZ-2107 owners are rarely satisfied with their engine, so they strive to change it. Of course, everyone wants to drive at high speed, even if the car is not exactly designed for this. Let's find out which engine is best to install on this model and what are the criteria for choosing this device.
VAZ-2107: interior tuning. Description LADA-2107 (“seven”)
In the classic line of Volzhsky Automobile Plant models, one of the most popular is the VAZ-2107. Interior tuning can give the owner an unforgettable feeling of newness. How to carry it out at minimal cost will be discussed in this article.
Sources:
https://myducato.ru/vaz/kakaya-torpeda-podhodit-na-vaz-2107.html https://vikupavtovspb.ru/vaz-2107/kakuyu-torpedu-mozhno-postavit-na-vaz-2107.html
Key type switches
The VAZ-2107 torpedo trim has special sockets for key switches. Among them:
- External lighting controller. It has three positions. The first indicates that the system is deactivated, the second indicates that the license plate and side lights are on, the third indicates that the low beam is on.
- Automatic rear window defroster switch. You can turn it on after starting the engine.
- Car rear fog light switch. The regulator is activated simultaneously with the low beam headlights.
- Heater fan control. With its help, you can select the desired circulation speed of the air supplied by the heater.
In addition, the VAZ-2107 torpedo is equipped with letter control indicators, namely:
- The “A” indicator indicates that the seat belts are not fastened (illuminates red after the ignition is turned on).
- “B” – lights up in orange, indicating that the rear window heating is operating.
- “B” is an indicator of emergency operation of the machine’s brake unit. Lights up red if there is a critical drop in the fluid level in the hydraulic brake reservoir.
Torpedo two thousand one hundred seven
The installation involves the use of a soldering iron, scissors, and a gas stove. For best functioning, tanks from an engine chisel are installed under the hood of the newest torpedo. When deciding which panel is best suited for the VAZ 2107, you must take into account that the torpedo from the three thousand one hundred ten car model has a different shape. To install it, the corners are removed and additional work is carried out to adjust this structure.
Before deciding which panel can be installed, it should be borne in mind that at any moment the original VAZ 2107 torpedo may be returned. If such a procedure is carried out without the help of others, it is recommended to use a book on repairing classics. It will take a lot of time to complete the work.
When connecting the wires, you must remember that one goes to ground, and the second goes to the panel to the corresponding contact. It is recommended to label which connector goes where. To operate the speedometer, a speed sensor from a two thousand one hundred ten model with six pulses is installed. If the “seven” is armed with an econometer, it is recommended to install a tee from two thousand one hundred six to two sensors, including a pressure sensor from four hundred two motors.
The panel from the BVM also fits the VAZ two thousand one hundred seven torpedo. But not all car owners know which model. It is recommended to use a torpedo from a BMW E30 with some modifications. It will be necessary to install front electric windows. This is due to the fact that with this panel the handles will interfere with closing the doors. Because the gearshift knob in the standard position is not suitable for use with this torpedo, you will have to bend the gearbox lever. The stove also requires certain configurations.
Auto mechanics know everything about the features of the upcoming work. For example, the torpedo from this BMW model is somewhat larger, but when installing it there is no need for severe configurations.
The advantages of the new panel include:
- huge characteristics - the length of the hood has increased by ten cm,
- the height of the car has increased by five cm,
- added about twenty liters. s., from their five l. With. within two days it is necessary to receive new caps on the disks.
Other signs
The VAZ-2107 torpedo also has a number of signaling devices. Among them:
- Engine control malfunction sensor (relevant on models with a fuel injection system). The indicator glows orange when the ignition is on. After starting the power unit, it goes out. If the light flashes frequently and is constantly on, contact a repair shop. In this case, operation of the machine is allowed, the system goes into backup mode.
- Battery charging signal. When the engine starts, the indicator lights up red and goes out. If the lamp continues to glow, you should pay attention to the battery charge. The main causes of the malfunction are: poor timing belt tension, alternator malfunction, or disturbances in the electrical circuit. If this problem is ignored, it will lead to a complete discharge of the battery and in some cases, a fire.
- Side light indicator (lights green when turned on).
READ What lamps are on the VAZ 2115
snyatie-paneli-vaz-210754.jpg
Removing the “tidy” of the presented car is carried out in the following sequence:
1. First, you need to prepare the car for operations (to do this, you should review the corresponding material called “Preparing the VAZ 2107 car for repair and maintenance”).
2. Then you need to disconnect the wire on the car from the negative terminal of the battery.
3. After this, use a screwdriver and carefully remove the handles from the stove control levers.
4. The next step is to unscrew the nut that secures the meter reset handle. We remove the nut together with the washer and push the handle into the space that is located behind the instrument panel.
5. Using a thin screwdriver, carefully pry and then remove the screw plug that secures the instrument panel.
6. Using a Phillips screwdriver, unscrew the fastening screw.
7. Carefully remove the “tidy” of the VAZ 2107.
8. Disconnect the cable after the union knurled nut of the car speedometer drive cable has been unscrewed.
9. After this, remove the vacuum supply hose from the econometric fitting.
10. Carefully disconnect the blocks (three colors) of the wiring harnesses.
11. Now you can remove the panel from the car. After this, you can safely perform the following operations:
-replace the backlight lamps;
-if necessary, replace the control lamps.
Installation of the “tidy” should be carried out in the opposite order of its removal.
Torpedo 2107. connecting devices
- Please log in to reply.
#1 Antif
- Top
- Complaint
#2 Antif
- Top
- Complaint
#3 Valek-Yalta
- Top
- Complaint
#4 Antif
- Top
- Complaint
#5 Valek-Yalta
- Top
- Complaint
#6 Antif
I’ve been checking it for 4 days now, I did everything according to the diagrams, it feels like on a seven torpedo you need to turn on the lamp to light it, and not a plus like on a penny one. Although it seems like nonsense. I'll check again tomorrow. Well, your photos will be very relevant. And another question: Where to connect this air duct (2107-8104010). A sealant in the central air blowers and on the reverse side?
- Top
- Complaint
#7 Valek-Yalta
A sealant in the central air blowers and on the reverse side?
- Top
- Complaint
#8 Antif
well, a rubber seal. I’ll ask this: where the central air ducts are connected, it’s not written anywhere on the boxes:
The one at number 19, where should I connect it to the stove?
- Top
- Complaint
#9 Valek-Yalta
- Top
- Complaint
#10 Antif
- Top
- Complaint
#11 The Forester
And I'm guessing. Well, in seven of them they are somehow connected to the stove. I don’t get what the body has to do with it.
The deflectors in the middle of the panel are an air intake from the outside, and not from the stove. If you even pay attention to the deflectors themselves, they have “wheels” on the side in order to regulate not only the direction, but also the air flow (including blocking it completely). And they also have a hole in the body for the air supply of the stove, to which the central deflectors are actually connected, and which the 2101 does not have:
I think the photographs show everything quite clearly
This is the perfect place for a radio or additional buttons/switches.
