Hello dear reader! It's time to talk about creating the front for the car. Let's consider a simple option without a closed volume.
What you need to remember when working with glass mat: - There is no need to pour polyester resin into the recesses of the rings. -You cannot add a lot of hardener during the first layers of lycra. -Try to lay glass mat as much as possible from the inside. This will save you a couple of days. -Order the hardener with a reserve, in the final steps you can drown it and add more hardener -Sand all the places where the lycra will connect to the door. Drill holes to improve bonding. -Start both blanks at once. -Be sure to try on parts at all stages of fitting and filling.
Materials used: -Lycra (can be bought in fabric stores) -Fiberglass 600 (buy a roll of 4-5 meters) -Polyester and hardened (buy 5kg at once in a specialized store, if you think you can get by with repair kits, then you are mistaken) -Space rings -Wooden glazing bead -Stapler -Hair dryer -Hot gun -Kneading containers -Rubber gloves -Brushes -Sandpaper 80-150 -Universal putty (for example Novol)
Started
