When and how to properly change the cabin filter on a Chevrolet Lanos. We independently replace the cabin filter in a Chevrolet Lanos

The Chevrolet Lanos cabin filter is a very important element of the car's heating system. It cleans the air entering the vehicle and prevents clogging of the heater core, which increases the service life of the entire interior heating system. Also, purified air has a positive effect on the well-being of the driver and passengers.

Purpose of the cabin filter on Lanos

When driving a car, air enters the cabin, which contains harmful substances. This is not only dust, but also carcinogenic substances from car exhaust. The cleaner also protects the driver and passengers from the smell of the antifreeze liquid that is used to wash the windshield of a Lanos car. Breathing vapors of antifreeze liquid is contraindicated, since it contains isopropanol, which contributes to headaches.

Air enters the car interior from the street through air ducts. Many drivers do not pay attention to air purification filters, and some do not even know about their existence. Cars began to be equipped with air purifiers in 1991, but not on all models. It is worth noting that Lanos was produced with air purifiers, which, as befits such devices, tend to become clogged. If the cleaner becomes clogged, it needs to be replaced. If you do not replace a clogged cabin filter, the driver and passengers risk their health. The absence of a purifier or its prolonged use leads to the following harmful substances entering the interior:

Tire dust
Wheel rubber particles
Asbestos from brake pads
Bacteria and viruses

The exhaust contains more than 200 toxic substances, which today are purified using catalytic converters. However, how many conscientious drivers use catalysts or do not replace them with spacers when they fail?

?Community “My Lacetti”?

Our Community exists on a voluntary basis and is designed to unite car owners and lovers to identify the shortcomings and advantages of these cars. Each of you already knows some secrets, tricks, little-known facts and features. Or maybe you recently became the owner of a car and want to share your impressions and feelings. If you are interested in the development of the Community and want to fully participate in it, then register and become a full member

Registration also allows you to fully immerse yourself in the life of the Community, and you will be able to:

create your personal page and share your media files, experiences, impressions, etc.
search and add friends with similar interests
monitor the activity of friends and more
create topics, ask questions and get answers
create groups, like in social networks
write private messages to any users
Receive custom email notifications for any activity in the community
automatically become a forum member
get advanced site search
and much, much more, as the community does not stand still

A participant rating function has also already been introduced. The so-called Rank. For each activity (comments, time spent on the site, topics, answers, completed profile, etc.) points are awarded, which are reflected on the participant’s profile page. Depending on the number of points you will go through the following path: Beginner - Beginner - Recognizable - Famous - Famous - Outstanding - Greatest - Legendary - Authoritative member of the Community

Your status will also be reflected on your profile page and change in real time.

To access all functions, after logging in, you need to add an avatar (profile picture), then move the mouse over the upper right corner of the screen and select the desired action from the drop-down list.

Adding an avatar is a necessary measure against automatic registrations. Profiles without an avatar are deleted after a while.

Become a member of the Community, ask questions, answer questions from others, make new acquaintances, add friends and simply plunge into our special world of motorists:

Principle of operation

The filter element is a piece of corrugated paper. The structure of the paper allows only air to pass through, and small particles of dirt and dust remain on it. Over time, it becomes clogged and makes it difficult for air to pass through it freely. This leads to a deterioration in the quality of heating and increased loads on the heater fan, which negatively affects the duration of the electric motor and increases the humidity in the car, which, in turn, leads to fogging of the windows.

Every driver knows well where the cabin filter is located, located in the engine compartment, under the windshield on the passenger side. It can only be seen when the cover is removed.

Where is the filter located?

The cabin filter in a Chevrolet Lanos is located behind the air intake grille. The original element that is supplied with the car by the manufacturer has the article number CU 17 003. The cost of this device starts from about 600 rubles. However, many owners of this vehicle often purchase and install an analog cabin filter, since its price is an order of magnitude lower and it is in no way inferior in quality to the original.

The Chevrolet Lanos manufacturing plant, in its technical operating conditions, recommends replacing this filter every 20,000 km. This is especially important if the car owner has any allergic reaction, for example, to pollen. If you replace the cabin filter in a timely manner, this will help get rid of not only dust and other contaminants, but also the unpleasant odor, which, thanks to the device, does not penetrate into the cabin.

Sometimes experts recommend changing the cabin filter in a Chevrolet Lanos every 10,000 km. This is considered ideal. It is necessary to take into account the time of year, the mileage of the car, and the well-being of those who use the car most often.

A faulty cabin filter can cause great harm to the driver and passengers. Particular attention should be paid to the functioning of the filter in a large city, since it is in such places that the largest number of pollutants are localized. When purchasing a used car, the cabin filter must be changed immediately.

DAEWOO-LANOS

KHMELNITSKY AUTOPORTAL, CAR, OILS, CAR CHEMISTRY, TUNING, REPAIR, AUTOMORAL

HOME TIPS
TUNING
AIR BRUSHING
CAR TOURISM
REPAIR MANUAL LANOS

MAP OF SITE

When to change the cabin filter

The filter system in Lanos cars is replaced after every 10,000 kilometers. You need to change the device if:

soot appears on the inside of the windshield;
air ducts in the ventilation and heating systems become clogged;
Dust appears on the front panel even with the windows closed.

ATTENTION! If the ventilation system does not work properly in cars equipped with air conditioning, the evaporator breaks down, which leads to a decrease in the efficiency of the air conditioning system.

If at least one problem appears, it can be judged that the system was not installed at the factory. This requires installation yourself.

Types of cabin filters for Lanos

Before you understand the issue of replacing the cabin filter on a Lanos, you should find out what types of cleaners are there and how do they differ? Devices differ in the material from which they are made. They come in the following types:

Conventional or barrier - they are made from paper, as well as natural and synthetic fabric. Through this composition, small impurities are retained in the air. Conventional cabin filters clean the air of dust and insects. It is worth noting that filters are not made only from paper, as this is prohibited by technical requirements. After all, cellulose helps create favorable conditions for the growth of bacteria.
Carbon - an additional layer is activated carbon, which helps absorb harmful gases that are present in the incoming air. Compared to a conventional purifier, carbon filters help not only filter the air from dust and insects, but also from harmful gases. Over time, if the carbon purifier on Lanos is not replaced in a timely manner, this will lead to a decrease in the absorption properties, so the filter will only clean the air from dust and insects
Polyphenol-coated carbon is a more advanced class of cleaners that additionally have the property of neutralizing allergens. Such devices are made by applying a layer of activated carbon on one side and a layer of polyphenol on the other. They protect the driver and passengers from air containing allergens entering the cabin. Such filters cost more than the first and second options, but it is rational to use them only in autumn and spring
Electret - have an additional charged layer of thin fibers that attract the smallest contaminants in the air. They retain 99% of all the smallest impurities - plant pollen, fungal spores, various dust, as well as soot, smoke, etc. Electric current is supplied to such devices
Combined - these purifiers combine the capabilities of carbon and electret devices, which provides air filtration in several levels. Such devices are the most expensive, but at the same time they have maximum cleaning efficiency

We recommend: Arranging the exterior of your car
Regular and carbon filters were installed at Lanos from the factory. However, if necessary, you can independently install more effective cleaning devices, protecting yourself from inhaling harmful air.

Catalog of spare parts for each car

Our range of spare parts is as diverse as the list of existing vehicles. On an ongoing basis, the catalog presents all kinds of groups of spare parts, both common (pads, filters, shock absorbers, batteries, light bulbs) and rarely used (drive shafts, axle shafts, crankshafts, cylinder heads, headlights).

The spare parts sections for Mercedes-Benz, Audi, Peugeot, Toyota, Skoda, Ford, Fiat, Mazda, Mitsubishi, VW and other brands presented in our spare parts catalog are well structured, adaptive to work from a mobile phone and contain all the necessary information in electronic form for correct selection of spare parts when repairing a car of any model.

We work with industry professionals and proven (with a guarantee of at least 6 months) manufacturers, including ATE, Brembo, Bosch, Kyb, Febi, Gates, SKF, Sachs, Sonax, Osram, Varta and others, the total number of brands represented is very significant and has about 3,000 companies.

Main symptoms of spare parts malfunctions

Body roll is greater than acceptable;
increased braking distance;
difficult to turn steering wheel;
knocking, whistling, creaking and other sounds while driving or with the engine running;
uneven tire tread wear;
presence of oil stains under the car;
The car “stumbles” when accelerating and braking.

Common causes of malfunctions

poor quality of road surface;
aggressive driving style;
untimely service;
operation at low temperatures;
exposure to dirt and chemically active substances;
lack of oil and lubricant in units;
wear of adjacent parts.

Replacing spare parts

On modern car models, spare parts are not disassembled and repaired; in case of breakdown, they are replaced entirely. Repairs are carried out at specialized service stations or car services; in order to comply with the warranty, the VIN of the car and its mileage at the time of installation are included in the order (it is important to know: when contacting a garage-type service that does not have the required documents, the warranty for spare parts will not be extended, as well as and in case of self-replacement).

Advantages of cooperation with Autocompas.ru

Our company will save your time; you can order any spare parts in just a few clicks or during a call. Our spare parts selection specialists are always ready to answer your questions and help you make the right choice in any price-quality ratio. We constantly run special promotions and offer discounts on products. In addition, the free shipping option will reduce your costs to a greater extent.

A malfunction of the cabin filter is unlikely to benefit the driver and passengers of a Chevrolet Lanos. A dirty cabin filter will allow dust and exhaust gases to pass through, which in any case will lead to severe headaches, nausea, and mental disorders. In addition, when dust enters the human body, it generally pollutes. As a result, waste will be deposited intensively, and sand or stones may appear in the kidneys. A dirty car cabin filter is especially dangerous for those car owners who live in large cities. It is in megacities that the most polluted air is produced, both by cars and by various enterprises. In principle, it was to protect health that the cabin filter was invented at one time. This car part does not have a specific service life, since each motorist drives differently and in different conditions. True, when buying a used car, the Chevrolet Lanos cabin filter must be changed immediately. During normal operation of the machine, the part is usually changed once a year. Work is usually carried out in the spring to prepare the car for the season. Replacing a Chevrolet cabin filter is carried out in several stages: remove the right part of the air intake grille: take a Phillips screwdriver and use it to unscrew the plastic pistons; You will need to stick your hand into the opening of the air receiver, feel for the filter and remove it from the system; When installing a new car interior air filter, you need to work carefully and make sure that the part does not fall into the air intake sleeve. Further steps to replace the filter are performed in reverse order. It must be changed if, during disassembly, it is discovered that it is heavily soiled. However, if dust has simply accumulated on the cabin filter, you can simply shake it off thoroughly and put the old part in place. If you do not change the cabin filter in a timely manner, its contamination will make itself known. Clean air will simply stop flowing into the car. A dirty filter causes the driver and passengers to inhale dangerous microorganisms, and all elements of the cabin (seat upholstery, leather steering wheel, control panel, seat belts) become saturated with an unpleasant odor. There are times when replacing a part does not bring a positive result. As a rule, the cause of this is a clogged air duct. To clean it, you should blow it out with a compressor. If this does not help, you will have to disassemble the entire system and then clean it using special tools. Then all parts and mechanisms of the system are thoroughly dried and reassembled.

Fogging of windows due to poor operation of the stove in the cold season, as well as a bad smell in the cabin are signs of severe clogging of the cabin filter. In the instructions below we will show you how to remove and replace the Chevrolet Lanos cabin filter yourself. This procedure is simple, so we recommend saving time and day by replacing the filter yourself.

You will need: a new cabin filter, a Phillips screwdriver, 15 minutes of time.

Under the hood, unscrew the top plastic panel.

We also unscrew this screw.

We take out the plastic panel.

This niche houses the Chevrolet Lanos cabin filter.

Let's prepare a new and clean cabin filter.

Insert the cabin filter.

Niche for the filter, view from the inside. After installation, tighten the plastic panel with self-tapping screws.

DIY video on replacing the cabin filter on a Chevrolet Lanos

In the factory configuration of Lanos, a cabin filter is provided only in the Lux version. Buyers of other modifications will have to take care of installing the cabin filter themselves .

It should be immediately noted that the cabin filter is located in a rather inconvenient place. Only a person with narrow and long arms can get to the air duct normally.

The filter needs to be changed at least once a year. It is best to do this in the spring, when active flowering has not yet begun. Over the course of a year, you can remove the filter 2-3 times and blow it with compressed air. This is what experts recommend doing.

Selecting a new filter

Before installing a filter system on a Chevrolet, you need to select it. Filters are:

Dusty. For its manufacture, non-woven material is used, which filters dust and large particles.
Coal. These adsorbent filters limit the possibility of dust entering the cabin and also ensure the neutralization of unpleasant odors and harmful gases.

A variety of cabin filters for vehicles are produced, which allows the car owner to choose an acceptable option for himself:

This is a dust filter that is low in cost and therefore available to a wide range of customers. The device effectively cleans the interior of dust and polluting microparticles, which ensures a healthy and hygienic microclimate. Due to the simplicity of the design of the device, ease of installation is guaranteed.
RAF Filter. This is a highly efficient device that has three layers of filtration. The first of them is produced using an antibacterial enzyme, so pathogens do not spread inside the car. The second layer is developed on the basis of sodium bicarbonate and activated carbon, which ensures high-quality elimination of unpleasant odors. The third layer is designed to block allergens.
When using a filtration system, dust and unpleasant odors are effectively eliminated. For impregnation, a biocidal protective substance is used, which ensures a complete fight against bacteria and microorganisms. The parameters of the device are ideal for the air duct of a Lanos car.
The carbon filter is produced by a Czech company and provides reliable protection of the interior from unpleasant odors and dust. High-quality manufacturing materials ensure long-term operation of the system.

Cabin filters from domestic and foreign companies have different technical characteristics, according to which they are selected.

Replacing the filter

Replacing the cabin filter in a Chevrolet Lanos can be done either at a service center or independently. If you decide to change the cabin filter yourself, then you need to stock up on a Phillips-head screwdriver, a new filter, rags and other available tools.

If you are replacing the filter yourself for the first time, it is recommended that you first watch a video where the entire replacement process is discussed in detail. In any case, you first need to find a cabin filter. The replacement process itself consists of several activities that should be performed:

Start the engine and set the wipers to a vertical position, as they should not become an obstacle when replacing the filter.
Open the hood and unscrew the plastic trim (another name for it is the cover). Below it is the cabin filter. When unscrewing the screws securing the cover, you should not use much force, as this may damage it.
After unscrewing the cover, it may not be dismantled. Then you will need to open the hood harder, and then it can be easily removed.
Then you need to remove the rubber seal covering the engine. You need to remove it very carefully. If the seal is damaged, it must be replaced with a new one. Its cost is low.
Then you should replace the old filter with a new one. After the filter is installed in place, all parts are assembled in the reverse order.

Some qualified specialists advise inspecting the filter after removal and, if there is only dust on it and there is no damage, then clean it, rinse it and install it in its original place. This is not worth doing! The cabin filter is not an expensive purchase, however, its benefits are quite large. Therefore, it is imperative to install a new one in place of the old filter. If this is not done and the old one is returned to its place, then in the winter the stove will not function normally. This will create an uncomfortable environment for the driver and passengers.

If after replacing the filter, no changes are felt, then it is recommended to pay attention to the air duct. It needs to be cleaned with a powerful air stream. If this does not help, then you need to repeat removing the equipment and using special solutions to clean the entire air purification system. It is noted that after cleaning each part, it must be thoroughly dried and reinstalled.

We recommend: 6 tips on how to deal with icing on car windows

What will you need to replace the cabin filter of Daewoo Lanos?

This procedure falls into the category of simplest service operations. Even a novice driver can handle it. Specialists change the filter in 5-10 minutes. To replace the filter on a Daewoo Lanos, we cannot do without:

1. Phillips screwdriver

2.New filter element

It is worth noting that there are many models of cabin filters. But their entire range can be divided into 2 main categories: traditional mechanical cleaning filters and active filtration systems (based on activated carbon). It is up to the driver to decide which one to choose. Mechanics are more affordable. Active filtration eliminates not only dust, but also foreign odors. Carbon filters, of course, are more expensive than classic foam filters.

DIY air filter diagnostics

The prevention process is quite simple and consists of the following steps:

Turn off the engine, turn off the ignition, open the hood;
The air element and housing are located on the right in the direction of travel of the machine. Unscrew the screws and move the cover to the side;
Remove the cleaner;
We carry out troubleshooting, remove dust, dirt, moisture, condensation;
If necessary, use a household vacuum cleaner, a vacuum pump to blow through the hygroscopic fiber with a stream of compressed air;
Check the tightness of the rubber seal;
We put the old cleaner (new), put on the cover, screw the bolts.

How to replace the filter?

You can replace the filtration system at a car service center. On average, the cost of the service will be 500 rubles. In order to save money, install the filter yourself in accordance with the instructions:

The left wiper is pre-installed in a vertical position in the center of the windshield. It is recommended to turn off the car completely
Open the hood and find the air intake. Using a Phillips screwdriver, unscrew the plastic screws that are on it. They are located on the right side of the air intake.
The base of the air intake cover is characterized by the presence of a rubber seal made in the form of a strip that needs to be pulled out.
After removing the air duct cover, it is recommended to remove the storm drain, which protects the filter from water entering it.
Completing all of the above steps ensures access to the air duct inside which the filter is located.
If a filter was previously installed in the car, remove it.
Inside the hatch, you need to wipe everything with a damp cloth to prevent dust from getting on the new filter. Leaves, fluff, dirt, etc. are removed from the air duct.
If there is no factory filter system, a new device is inserted into the air duct. It must be mounted behind a panel, which is designed to protect the air duct from large polluting particles.
The filter is pushed behind the area of the protective panel and installed in the seat as tightly as possible.
Work on installing the filter is carried out carefully, as it may fall through to the stove fan. When installing the filter system, you need to ensure that there are no distortions. The filter is installed tightly in place.
At the final stage, the air duct is assembled in the reverse order. It is recommended to check the operation of the system. To do this, you need to climb into the car and assess the air quality.

Lanos is a popular brand of cars that are owned by many car owners. To ensure comfortable movement in the vehicle interior, it is recommended to regularly replace the cabin filter.

Typical signs of blockage

Acceleration dynamics are slow, “sluggish”;
Sudden loss of engine power;
Long engine start;
The internal combustion engine is not working properly;
Unreasonable fuel consumption above the maximum range;
Frequent shooting in the exhaust pipe as a result of an unbalanced fuel mixture.

To correctly identify the cause of the malfunction, carefully carry out diagnostics, use portable scanners to read system errors of the electronic control unit.

Contact service station specialists for help. Unprofessional repairs do not guarantee full functionality of the air element.

Chevrolet car repair manuals and tips

Cabin Filter Replacement Guide

The Chevrolet Lanos cabin filter, like any other, traps dust and other volatile substances harmful to the human body, preventing them from entering the cabin. Therefore, timely replacement will save clean air in the interior of the car and maintain comfort and freshness.

Any manufacturers, including the concern that produced the Chevrolet Lanos, recommend replacing the cabin filter every 15-20 thousand kilometers. By following this unspoken rule, you can ensure comfortable conditions at any time of the year.

There are two ways to replace the Chevrolet Lanos cabin filter. It would be optimal to carry out the replacement in a specialized car service, since sometimes this is accompanied by the disassembly of a large number of vehicle parts. This takes a lot of time and effort, so it will be natural to delegate this work to professionals who will do it quickly and efficiently.

The second way is to change the cabin filter yourself. The more carefully a car owner takes care of his car, the longer it will serve faithfully. Therefore, you need to approach filter replacement with all responsibility and change it as it gets dirty, especially if you do it yourself, because you won’t have to spend money on a car dealership.

Note! The filter is cheap by modern standards, but an optimal microclimate in the cabin is very expensive. On average, the price of a cabin filter varies from 180 to 280 rubles, which, you see, is nothing.

Replacement process - what, where and how?

Unscrew the bolts on the top panelUnscrew the bolts on the top panel

Before you start replacing the filter on a Lanos, no matter how strange it may sound, you need to get into the car, turn on the ignition and put the wipers in a vertical position. This is done so that the wipers create as little interference as possible when removing the panel and subsequent filter replacement. The tools you will need are a Phillips screwdriver and a brand new filter, respectively.

After manipulating the wipers, you need to open the hood and unscrew the plastic trim, panel or cover, each master calls it differently. Directly below it is the cabin filter.

Note! Do not apply too much force to the screwdriver or press with all your might. This will not lead to anything good, only damage to the case. Efforts must be made, but everything must be in moderation, and then the process will go as it should.

Removing the plastic coverRemoving the plastic cover

Once the plastic cover is unscrewed, attempting to remove it will result in failure. There is nothing mysterious about this - you just need to lift the hood a little more, holding it with your hand, and the panel will come off easily and simply.

Next, you need to carefully remove the rubber seal from the metal shield of the compartment where the engine is located. If you damaged it, or it was already damaged, it doesn’t matter, you need to replace it with a new one, it is sold at any auto store and is inexpensive. After this, you need to stick your hand into the cavity and pull out the old cabin filter.

Installing a new cabin filter on LanosInstalling a new cabin filter on Lanos

Some DIY experts suggest inspecting the filter for further suitability. If only dust has settled on it, you can shake it off or vacuum it and put it back in place. If it is wet and completely saturated with dirt, then naturally you should throw it away. Otherwise, even after cleaning, the stove fan will not be able to circulate air into the cabin, and it will heat up very slowly, which is extremely uncomfortable. And the easiest way is to do neither one nor the other; we repeat, the filter is inexpensive, so a complete replacement is the best option.

Note! A clogged filter is a source of harmful microbes.

Once microbes get into the lungs, they will begin to do their “dirty deeds,” and if children are often transported in the cabin, this is extremely undesirable. You can't skimp on your health. Add to this a most unpleasant odor that can not only poison the air, but also be successfully absorbed into the upholstery of seats and the upholstery of the car. And then the scales will most likely tip in favor of a complete replacement rather than cleaning.

New cabin filter for Chevrolet LanosNew cabin filter for Chevrolet Lanos

After all the replacement manipulations, all parts must be assembled in the reverse order. Many car owners complain that replacing the cabin filter does not produce any visible positive changes.

Note! If there are no results from replacing the filter, the reason may be a clogged air duct - it should be blown out with a powerful stream of air.

And if this doesn’t help, then the matter is more serious. You will have to remove the entire system, disassemble it, thoroughly clean it using special compounds, then dry it and put it back in place. This process is very labor-intensive, taking not only a lot of time, but also a large number of nerve cells. Therefore, it is still worth contacting a workshop where all work will be completed with high quality and quickly. And finally, when buying a cabin filter, you need to make sure that it fits the Chevrolet Lanos car, so that you don’t have to pay extra money in case of an error.

Sources

https://lanosovod.ru/salonnyj-filtr-na-lanose.html
https://carwin-motors.ru/raznoe/zamena-salonnogo-filtra-na-lanose.html
https://OFiltre.ru/avtomobilnyj/salonnyj/lanos
https://adaptsport.ru/obsluzhivanie/shevrole-lanos-zamena-salonnogo-filtra.html
https://turboracing.ru/remont-auto/zamena-salonnogo-filtra-chevrolet-lanos/
https://avtozam.com/daewoo/lanos/zamena-salonnogo-filtra/
https://promremont34.ru/ustrojstvo-avto/kak-zamenit-salonnyj-filtr-na-shevrole-lanos.html

Chevrolet Lanos cabin filter – Lanos Automobile Club (Sens)

The cabin filter is probably an integral attribute of any modern foreign car.

Well, the Chevrolet Lanos is also, although a popular car, a foreign car, but even in the maximum configuration a cabin filter has never been installed.

Nevertheless, it is very easy to buy a Chevrolet Lanos cabin filter today, but installing it for the first time will have to suffer a little, because its location cannot be called convenient.

Actually, this is what a Lanos cabin carbon filter looks like. An ordinary filter element without carbon filler has a similar appearance, but the filter itself is often pure white.

You can buy a Lanos cabin filter at almost any auto store. However, if you still couldn’t find it anywhere, then in this case, use the services of the well-known Exist store. In the catalog, the cabin filter for Lanos can be found under the following numbers:

Coal Dust 9.7.113 9.7.32 GB-9921/С GB-9921

E2536 E1536

It is worth noting that the cabin filter slightly limits the performance of the air conditioning fan, so you should remember to promptly replace the filter element. In addition, signs of the need to replace the filter include frequent fogging of the car windows.

The process of installing the cabin filter Installing/replacing the cabin filter on Lanos is quite simple, but if you are doing this for the first time, it is recommended that you read these instructions. To work you will need a shaped screwdriver.

First of all, it is necessary to dismantle the decorative plastic lining of the air intake. To do this, release the pistons from the clamps by unscrewing them with a figured screwdriver and remove them from the holes. After this, you need to carefully remove the pads. It is worth noting that you can limit yourself to dismantling only the right pad.

After the cover is removed, it is necessary to remove the plastic drain from the hole. The drain is secured with latches and can be dismantled intuitively. After this, everything is ready to install or replace the Lanos cabin filter. If you try really hard, you can easily see the filter seat.

At this stage, everyone decides for themselves which way is easiest to insert the filter. It should be remembered that the filter must lie on the flange of the seat and should not have any deformations on the sides. After installing the filter, assembly is performed in the reverse order. Now you know exactly and can tell others how to change the cabin filter on a Lanos!

Source: https://lanos-club.org.ua/filtr-salona-shevrole-lanos/