VAZ 2110 wheels: standard dimensions, diameter, bolt pattern, width, offset, center

What wheels were installed on different car bodies and configurations?

The factory equipment of the car is limited to the installation of stamped wheels. They have good performance in terms of strength, service life and wear resistance. However, as far as appearance is concerned, there is still room for work.

By the time the LADA 2110 was released, the automotive market was already filled with various alloy wheels of various sizes. The best option is to install alloy wheels, which are attractive and durable.

Before purchasing new disks, you must remember that not every disk may be suitable for a car. The product is selected based on the parameters determined by the vehicle manufacturer. The bolt pattern, the size of the central hole and the nuts that will secure the disk are taken into account.

And that's not all - the territorial conditions (climatic features) in which the car will be operated are also considered, as well as the external data of disks from various manufacturers.

The AvtoVAZ plant installed stamped wheels in black or white with the following standard parameters:

bolt pattern 4x98, which indicates that the disk model is fastened with four studs, each 98 mm long
departure ET35

The Ten is a universal model, the wheel arches of which allowed the installation of wheels with dimensions from R13 to R17. Car owners installed beautiful alloy wheels from well-known brands, which made the car even better.

Optimal car tire pressure

The main task of car tires is to provide effective traction between the car and the road. With normal air pressure in the tire, the load in the contact patch of the wheel with the road is distributed evenly, due to which tire wear occurs evenly, the car handles well and fuel consumption is within normal limits.

There are three possible scenarios in which the tire pressure will not be optimal:

Increased pressure (tires overinflated);
Low pressure (tires underinflated);
Different pressure in all wheels.

Check the tire pressure with a special tire pressure gauge. This should only be done on cold tires, that is, before leaving the parking lot or garage.

If deviations from the normal pressure are detected in any of the tires (see the table below for what pressure should be in the tires of your passenger car), such a wheel must either be inflated or excess air released from it - that is, the pressure must be adjusted to norm. In one of our articles, we already talked about which car compressor is best for inflating tires.

It is worth noting that the tire pressure in winter should be exactly the same as in summer. But due to the sharp temperature change, in winter, monitoring the air pressure in the wheels needs to be approached more responsibly.

It is better to inflate your tires outside. Also, do not forget to check the tire pressure when there are significant changes in ambient temperature, and if necessary, adjust it:

if it gets cold outside, the pressure in the tires will decrease,
and when it gets warmer, it will rise.

It should also be remembered that while the car is moving, the tires heat up, the air in them expands, and the pressure increases, and the handling and braking properties change.

Increased tire pressure

With increased tire pressure, the load at the point of contact of the wheel with the road acts to a greater extent on the central part of the tire tread, thereby causing uneven wear of the tire.

On overinflated wheels, the car brakes worse! This happens because if the tires are overinflated, the contact patch with the road decreases, which means the friction force that keeps the car from sliding decreases. At the same time, the braking distance increases noticeably.

In just twenty minutes of driving, taking turns as aggressively as possible, the pressure in the car’s tires can increase by 0.5 atmospheres. And on long trips at high speed, the pressure in the tires can increase to 4-5 atmospheres. And modern tires are designed for this.

But if the tire has a hernia or cut, it can heat up and explode while driving. But on the road it’s a disaster.

Low tire pressure

Wheels lowered to just half an atmosphere change the behavior of the car and become unusable much earlier than expected. When the pressure is low, the load on the tire surface is distributed unevenly. In this case, the sidewalls of the tire where the tire contacts the road are subject to increased wear.

The sidewalls of flat tires are softer and bend when you turn the steering wheel. The trajectory of the wheel and tire do not match, so the car responds to the steering wheel late.

Moreover, if the tire pressure is reduced, the wheel may even come off during a sharp turn.

Therefore, it is very important to regularly check tire pressure and maintain it within normal limits.

This is especially true in winter, since in cold weather the tire pressure can easily drop by 0.3 (or even 0.5) atmospheres.

It is also worth keeping in mind that low air pressure in the wheels leads to increased fuel consumption. Just in case, we remind you that our website has an excellent selection of tips on how to reduce fuel consumption in a car - be sure to read it, you will probably find something new for yourself.

Different pressure in car tires

The most common situation among drivers is when the pressure in all wheels is different. There can be many reasons, for example:

Faulty spool valves;
Uneven tire wear;
Or perhaps you caught a nail with the wheel.

During emergency braking, in this case, the coefficient of road adhesion between inflated and lowered wheels will be different, which with a high degree of probability will lead to the car skidding or turning across the road.

If the car starts to pull even a little to the side, there is a reason to check how the tires are inflated. And remember that tires don’t last forever. Even very good tires need care.

The main disk manufacturers whose products are set to ten

Most VAZ 2110 representatives are equipped with products from the Russian manufacturer KiK. The brand is quite popular due to its huge assortment, as well as its design developments in the field of creating discs.

The next popular manufacturer is Vicom, which produces sports products. The company was created on the basis of the Institute of Metals and Alloys, has its own production technology and produces interesting specimens with twisted colored knitting needles.
The Krasnoyarsk SKAD plant produces wheels that are exported to other countries. The assortment is not very huge, but due to the mass production of disc models, the plant can set a minimum price for the product.
Slik products have been supplied to the Russian automotive market for three decades now. The assortment is quite wide, here you can find exclusive items, wheels for high-speed travel and off-road driving.
The very young brand IFree began its work in 2010 and has gained a certain respect among car owners.

These manufacturers produce products that provide the optimal solution for the driver: an affordable model price and its acceptable quality.

Disadvantages of the VAZ 2110

The Achilles heel of the car is the stove. When driving down to -15° degrees it’s still okay, but when the thermometer creeps lower, there’s a real contrast in the cabin. The legs freeze from the cold, and the upper body suffers from the heat.

There is no need to talk about sound insulation, unless you bring it to mind on your own. Rattles in the interior of Russian cars are unlikely to surprise anyone, and the VAZ 2110 is no exception. The iron in the hood area is not thick, and pressing the hood frequently when closing it may cause dented spots.

It holds the road quite confidently, which is due to the streamlined shape of the car. Above 130 - 140 km/h, it really becomes scary, but overall not bad. The car's suspension is strong and designed for our country. Power steering is not included in the basic package, but it can be installed as a separate option upon request.

What kind of disks can be installed?

Too huge a range of products can confuse the most experienced auto expert. Therefore, before purchasing a product, you need to familiarize yourself with the characteristics of popular discs, as well as know which countries produce them and are popular. What products are suitable for the LADA 2110 car?

Domestic production. When creating models, the low quality of the road surface and the significant load on the wheel are taken into account. The product combines durability, reliable design and affordable cost compared to analogues from imported manufacturers.
China. They became famous for their low cost and poor performance characteristics. At the same time, on the Chinese market for domestic use, there are product samples that are not inferior in their characteristics to well-known global brands. Many car enthusiasts order wheels online, which does not always pay off.
Türkiye. Pretty good disk options. They have good quality, durability and stylish design. Quite suitable for our roads. As for the cost, they are much more expensive than Chinese and domestic manufacturers.
Asian countries (South Korea, Taiwan, Japan). They have high technical characteristics and are reliable in operation. But the price of the product is very high.
European brands and USA. Due to the high cost, wheels from these manufacturers are almost never found on our VAZs.

Review of the best summer and winter tires

It is better to acquire separate sets of summer and winter tires in advance. Pirelli Cinturato P1 Verde tires are ideal for the warm season. Their cost is relatively high (from 3,500 rubles per 1 tire). However, they perform excellently on wet asphalt and are highly resistant to wear.

Continental Conti Premium Contact 5 is well balanced. There are a large number of special drainage channels - they make it easy to drain water from the contact patch. This kit will cost slightly less than the one discussed above.
Goodyear EfficientGrip Performance provides good grip and low fuel consumption. However, the tread thins out quite quickly - especially during intense driving. The rubber is soft and handles well. Despite its softness, it is difficult to damage it redder.
Dunlop Sport BluResponse is relatively cheap compared to all the options discussed above. However, it has its weaknesses. For example, on wet asphalt the wheels slip a lot and handling deteriorates.

Semperit Comfort-Life 2 is a rare guest on Russian territory. However, on dry asphalt at positive temperatures it performs more than well. However, rubber is distinguished by its noise.
GOODYEAR 175/70R14 UG ICE ARCTIC D-STUD - studded tires at a relatively low cost. Regardless of the ambient temperature, it retains its flexibility and softness. Cost – from 4,000 rubles.
HANKOOK 175/70R14 W429 is a more budget option. Cost – from 2,800 rubles. Thanks to the deep tread and flexible design, the driver can feel completely safe on the road.
KUMHO 175/70R14 WI31 84T usually costs several hundred rubles cheaper than the modification discussed above. The presence of studs makes this tire safe on almost any road.

VIATTI TIRES 175/70R14 BRINA NORDICO is manufactured using rubber mixing technology. Reinforced lugs make this model indispensable not only in winter, but also on dirt roads in summer.
SAVA 175/70R14 ESKIMO ICE MS is the most profitable option. It has a relatively low price (from 2,000 rubles). There are no thorns. However, the deep tread and its shape provide high-quality, reliable contact with any surface.

Choosing suitable tires for the VAZ 2110 is a relatively simple process

However, it is important to familiarize yourself with the intricacies of tire selection in advance. Wheels that are too large can easily damage the vehicle body

Tired of paying fines? There is an exit!

Absolutely legal (Article 12.2);
Hides from photo and video recording;
Suitable for all cars;
Works through the cigarette lighter connector;
Does not cause interference to radios and cell phones.

Winter is approaching, time to get new tires. However, due to the wide range of models, it is difficult to buy winter tires at VAZ. The experience of car enthusiasts in 80% of cases contradicts the ratings of glossy magazines and advertising brochures.

Maximum and minimum possible parameters of non-standard disks

The most acceptable option for mounting on a VAZ 2110 is considered to be alloy wheels. When choosing alloy wheels, you need to consider the following parameters:

R – disk diameter;
J – rim width;
ET – indicates departure;
Dimensions of tires mounted on the rim;
the diameter of the central hole is 58.5 mm;
the diameter of the circle on which the bolts are fixed is 98 mm.

All these indicators may vary depending on the selected model. For example, for 13-inch wheels the width ranges from 5 to 5.5 with an offset of 35 - 35. On 14-inch wheels the width increases from 4 to 6, respectively, and the offset decreases from 45 to 35. For 15-inch models the values are different .

Compliance with these values is very important. Otherwise, you can get into a lot of trouble driving your car on the road. A car with small wheels still doesn’t look as stylish or presentable.